Good morning everybody,
the FreeBSD raid monitoring website, which contains a lot information
regarding raid monitoring under FreeBSD, has a new home:
http://www.nico.schottelius.org/docs/freebsd-raid-monitoring/
If you've additional information or updates, please let me know
at nico-freebsd
Hello guys!
As we've some Freebsd servers at work and we need to control the status
of the raid-systems I started to write a page describing how to monitor
the different raid-systems.
It cat be found at
http://nico.schottelius.org/documentations/freebsd/freebsd-raid-monitoring/
I know
I'm running FreeBSD 6.2 RELEASE on a Dell PowerEdge SC440 with a SAS 5/iR
Raid controller.
Is there any monitoring utility available for these adapters?
pciconf -lv:
[EMAIL PROTECTED]:8:0: class=0x01 card=0x1f091028 chip=0x00541000 rev=0x01
hdr=0x00
vendor = 'LSI Logic
On Fri, 20 Jul 2007, Lars Olsson wrote:
I'm running FreeBSD 6.2 RELEASE on a Dell PowerEdge SC440 with a SAS 5/iR
Hmmm, must be a software-assist RAID. Does it probe a mega-volume /
logical disk or individual components?
~BAS
Raid controller.
The drives is detected as one logical drive. /dev/da0.
-Ursprungligt meddelande-
Från: Brian A. Seklecki [mailto:[EMAIL PROTECTED]
Skickat: den 20 juli 2007 17:33
Till: Lars Olsson
Kopia: freebsd-questions@freebsd.org
Ämne: Re: Raid monitoring - 6.2 RELEASEE - Dell SC440
On Fri, 20 Jul
:[EMAIL PROTECTED]
Skickat: den 20 juli 2007 17:33
Till: Lars Olsson
Kopia: freebsd-questions@freebsd.org
Ämne: Re: Raid monitoring - 6.2 RELEASEE - Dell SC440
On Fri, 20 Jul 2007, Lars Olsson wrote:
I'm running FreeBSD 6.2 RELEASE on a Dell PowerEdge SC440 with a SAS 5/iR
Hmmm, must
Hello,
the mfi(4) manpage briefly mentions the /dev/mfi? device, and that it
provides a simple management interface.
Is there any way to monitor the health of an array (the only thing of
interest in this case) using this interface, other than getting the
proprietary Linux blob to work? (I could
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bob Ababurko
Sent: Monday, October 10, 2005 1:23 PM
To: freebsd-questions@freebsd.org
Subject: RAID monitoring
Hello all-
I am looking for a way to monitor my Mylex acceleraid 250 controller
that I am running under FreeBSD 5.4. Their global
: October 11, 2005 11:04 AM
To: freebsd-questions@freebsd.org
Subject: Re: RAID monitoring
I have emailed them and asked if they had anything to monitor the RAID
array in a FreeBSD environment and they replied telling me that they
are not sure if Free BSD 5.4 will work with the Global array Manager
Hello all-
I am looking for a way to monitor my Mylex acceleraid 250 controller
that I am running under FreeBSD 5.4. Their global array manager
software is an .exe so I kmow that is not going to be working.
Does anyone have any solutions to monitor their RAID controllers?
TIA,
Bob
Hello all-
I am looking for a way to monitor my Mylex acceleraid 250 controller
that I am running under FreeBSD 5.4. Their(mylex/LSI) global array
manager software is an .exe so I am pretty sure that is not going to be
working.
Does anyone have any solutions to monitor their RAID
Ababurko
Sent: Monday, October 10, 2005 1:23 PM
To: freebsd-questions@freebsd.org
Subject: RAID monitoring
Hello all-
I am looking for a way to monitor my Mylex acceleraid 250 controller
that I am running under FreeBSD 5.4. Their global array manager
software is an .exe so I kmow that is not going
Hello,
is there anything like sysutils/asr-utils hardware raid diagnostics
but not for asr devices but ciss devices (like those in HP Proliant
DL380 G4)?
--
martin hudec
* 421 907 303 393
* [EMAIL PROTECTED]
* http://www.aeternal.net
Nothing travels faster than the speed of
On Thu, Aug 04, 2005 at 04:54:14AM -0500, Nikolas Britton wrote:
Heres a question for others to answer. How would you setup a sound
alert if for example one of the drives in a RAID 1 failed? This would
be for an ata-mkIII PseudoRAID mirror setup.
And what about email or phone call alert?
14 matches
Mail list logo