> -----Ursprungligt meddelande----- > Från: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] För Miguel > Skickat: den 9 november 2005 22:18 > Till: freebsd-questions@freebsd.org > Ämne: 6.0 install problems in HP DL380 Array 5i > > Hi, im having some problems when installing freebsd 6.0 in a > DL380 with smart array 5i controller, i have a RAID 1 using > two 36G disks, i can create the slide and partition without > problems, when sysinstall is installing the doc part, this > messages suddently appear in screen: > > Write failure on transfer ! (Wrote -1 bytes of 1425408 > bytes), after pressing the ok button, this appears: > > Unable to transfer the doc distribution from acd0 > > acd0 is the cdrom, according to dmesg: > > acd0: CDROM <COMPAQ CD-ROM> at at0-master PIO4 > > i did check the media and it is ok: > > shiva1 var # md5sum -c CHECKSUM.MD5 > 6.0-RELEASE-i386-disc1.iso: OK > 6.0-RELEASE-i386-disc2.iso: OK > > I dont know if this is related to my other post about the > hang on boot, you can read it here: > > http://marc.theaimsgroup.com/?l=freebsd-questions&m=1131474473 > 25120&w=2 > > I decided to try a ftp install, sysinstall finished without > any problem. > Now when im rebooting the server, it hangs for about 2 > minutes, exactly at this line: > > [...dmesg output...] > Timecounters tick every 1.000 msec > acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4 > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) > > After the 2 minutes hang, the server booted in the "normal" > way, i dont see any error messages.This also happened when i > was trying to install with the cd, sysinstall started after > the 2 minutes delay but i got the error described above. This > make nervous about some conflict or potential problem with > the hardisk or cdrom or even the array controllers somewhere, > i dont have any clue about what could be my problem, and i > have to have running in production this server by the > weekend, any hints? > > --- > Miguel > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" >
Yes, I recently upgraded an ML350 with a SA-641 card to 6.0-RC1. That one too stalls at boot at the same place. Not 2 minutes, but like 45 seconds. No problem installing via cd though. /Henrik _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"