On 5 Jun 2011 at 16:55, Michael Powell wrote:
per...@pluto.rain.com wrote:
[snip]
Power supplies do fail occasionally, and not always in obvious
ways such as failing to turn on at all. The output voltages may be
a little too high or too low, or they may be correct but with
excessive
[...]
PS: I don't suppose anyone knows a real good simple blow by blow total
newby dialog, as to how to realiably and correctly create and setup Jails
on FreeBSD 8.0? All the man pages I've found so far, are way over my
head. Good Reference material admittedly, but no good as an
...
(Therapy!) Oh, the grass needs cutting, and I'm now also under
instruction to change the bed, when the cat's finished sleeping on it!!!
Best Regards.
Dave B.
On 4 Jun 2011 at 21:35, Kaya Saman wrote:
Subject:Re: Strange system lockups - kernel saying disk error
On 06/05/2011 03:48 AM, per...@pluto.rain.com wrote:
Kaya Samankayasa...@gmail.com wrote:
Did you apply any updates shortly before it started to fail?
No updates! I did however, install unrar through ports.
Intuitively, that seems unlikely to have triggered the problem.
, and I'm now also under
instruction to change the bed, when the cat's finished sleeping on it!!!
Best Regards.
Dave B.
On 4 Jun 2011 at 21:35, Kaya Saman wrote:
Subject:Re: Strange system lockups - kernel saying disk error
[...]
Hmmm Hard drives do not like heat! Check the PSU
per...@pluto.rain.com wrote:
[snip]
Power supplies do fail occasionally, and not always in obvious
ways such as failing to turn on at all. The output voltages may
be a little too high or too low, or they may be correct but with
excessive ripple or electrical noise; or the supply may be just
Many thanks for the response!
On 06/04/2011 02:00 AM, per...@pluto.rain.com wrote:
Kaya Samankayasa...@gmail.com wrote:
I have an ancient pre-HT PIV machine with500MB RAM.
...
Everything was running fine until round about 2 days
ago when the system started locking up on me?
... is there
On 3 Jun 2011 at 15:09, Kaya Saman wrote:
Hi,
I have an ancient pre-HT PIV machine with 500MB RAM.
The system has an extra PCI-SATA card installed so I can make use of
modern high capacity drives.
Everything was running fine until round about 2 days ago when the
system started
On 4 Jun 2011 at 10:52, Kaya Saman wrote:
Many thanks for the response!
On 06/04/2011 02:00 AM, per...@pluto.rain.com wrote:
Kaya Samankayasa...@gmail.com wrote:
I have an ancient pre-HT PIV machine with500MB RAM.
...
Everything was running fine until round about 2 days
ago
[...]
Hmmm Hard drives do not like heat! Check the PSU voltages with a
meter, for accuracy and ripple. Failing SMPS's can do all sorts of odd
things.
Capacitor problems. Been there done that. They can be changed for very
low cost, other than your time.
DaveB
You might guess by know, I
Kaya Saman kayasa...@gmail.com wrote:
Did you apply any updates shortly before it started to fail?
No updates! I did however, install unrar through ports.
Intuitively, that seems unlikely to have triggered the problem.
I remember on other boards that went on me in the past with
capacitor
Kaya Saman kayasa...@gmail.com wrote:
I have an ancient pre-HT PIV machine with 500MB RAM.
...
Everything was running fine until round about 2 days
ago when the system started locking up on me?
... is there anyway to fix the kernel error quickly?
Did you apply any updates shortly before it
12 matches
Mail list logo
