edit
d: 2097152 104857604.2BSD 2048 16384 28528
e: 394264576 125829124.2BSD 2048 16384 28528
f: 839234174 4068474884.2BSD 2048 16384 28528
My opinion is:
bsdlabel -B mfid0s1
What has this all got to do with the Subject?
Subject: Re: Using Serial Port Other
Serial Port Other Than sio0 for the Console
Please don't hijack threads.
Start a new one if you have something to ask.
In the article 26.6.5.2. in the handbook you will find the answer. If
you want to use another sio port (COM2 im my case) for serial
communications you need to write the boot
-B mfid0s1
What has this all got to do with the Subject?
Subject: Re: Using Serial Port Other Than sio0 for the Console
Please don't hijack threads.
Start a new one if you have something to ask.
In the article 26.6.5.2. in the handbook you will find the answer. If
you want to use
Hello Tim
I did what in the handbook under article 26.6.5.2. is described but not shure
how I can write a new boot block to the disk. Here is what I think is correct:
Output from df and bsdlabel mfid0s1:
# df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/mfid0s1a989M
Hello Tim
Probably I find the problem. I did not read care enough the article 26.6.5.2.
I will try it asap (in the next few days). I will keep you updated.
Regards,
Am Sat, Jan 31, 2009 at 12:09:28PM -0700 Tim Judd schrieb:
On Fri, Jan 30, 2009 at 10:28 AM, Martin Schweizer
On Fri, Jan 30, 2009 at 10:28 AM, Martin Schweizer lists_free...@bluewin.ch
wrote:
Hello
I want to use sio1 for console access. I read chapter 26.6 in the handbook
and did the following:
/boot.config:
-P
/boot/device.hints:
[snip]
hint.sio.0.at=isa
hint.sio.0.port=0x3F8
###
Hello
I want to use sio1 for console access. I read chapter 26.6 in the handbook and
did the following:
/boot.config:
-P
/boot/device.hints:
[snip]
hint.sio.0.at=isa
hint.sio.0.port=0x3F8
### hint.sio.0.flags=0x10
hint.sio.0.irq=4
hint.sio.1.at=isa
hint.sio.1.port=0x2F8
hint.sio.1.flags=0x10
