I have Quake 3 installed and I have graphics/linux_glx installed. But when I try to start Quake 3, it causes X to crash with a Sig 6. I have an ATI Radeon 7500.
Here is my dmesg, pciconf -lv, and a link to my XF86Config file: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #3: Wed Jan 8 17:11:00 CST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/Warrior Preloaded elf kernel "/boot/kernel/kernel" at 0xc0598000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05980a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1800077005 Hz CPU: AMD Athlon(tm) XP 2200+ (1800.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!> real memory = 536805376 (511 MB) avail memory = 515440640 (491 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT VIA_K7 > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 Using $PIR table, 10 entries at 0xc00f8060 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon QW 7500 (AGP)> port 0xb800-0xb8ff mem 0xdfaf0000-0xdfafffff,0xd0000000-0xd7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 128MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 fxp0: <Intel Pro/100 Ethernet> port 0xd800-0xd83f mem 0xdfe00000-0xdfefffff,0xdfff7000-0xdfff7fff irq 5 at device 6.0 on pci0 fxp0: Ethernet address 00:d0:b7:90:c3:ac inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xd400-0xd4ff mem 0xdfff6000-0xdfff6fff irq 5 at device 7.0 on pci0 aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs bktr0: <BrookTree 878> mem 0xdf9fe000-0xdf9fefff irq 10 at device 8.0 on pci0 bktr0: Hauppauge Model 44801 C310 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <multimedia> at device 8.1 (no driver attached) ohci0: <NEC uPD 9210 USB controller> mem 0xdfff3000-0xdfff3fff irq 5 at device 11.0 on pci0 usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xdfff4000-0xdfff4fff irq 10 at device 11.1 on pci0 usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 11.2 (no driver attached) atapci0: <Promise TX2 ATA133 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 mem 0xdfffc000-0xdfffffff ir q 10 at device 12.0 on pci0 ata2: at 0xec00 on atapci0 ata3: at 0xe400 on atapci0 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8233 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device 17.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci0 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 10 at device 17.3 on pci0 usb3: <VIA 83C572 USB controller> on uhci1 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 2 umass0: Get Max Lun not supported (STALLED) pcm0: <VIA VT8233A> port 0xd000-0xd0ff irq 5 at device 17.5 on pci0 acpi_button1: <Sleep Button> on acpi0 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 850C> PCL,MLC,PML plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: cmd 3 failed at out byte 1 of 3 orm0: <Option ROMs> at iomem 0xcc000-0xd47ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% acd0: CDROM <CD-ROM CDU701> at ata0-master PIO4 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata0-slave PIO0 acd1: CD-RW <SONY CD-RW CRX195E1> at ata1-master PIO4 ar0: 152638MB <ATA RAID0 array> [19458/255/63] status: READY subdisks: 0 READY ad4: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata2-master UDMA100 1 READY ad6: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata3-master UDMA100 Waiting 15 seconds for SCSI devices to settle Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad6 -> 16 Opened disk ad6 -> 16 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 61MB (125441 512 byte sectors: 64H 32S/T 61C) Mounting root from ufs:/dev/ar0s2a module_register: module pci/radeon already exists! Module pci/radeon failed to register: 17 pid 82528 (XFree86), uid 0: exited on signal 6 pid 82652 (XFree86), uid 0: exited on signal 6 pid 82707 (XFree86), uid 0: exited on signal 6 pid 82786 (XFree86), uid 0: exited on signal 6 pid 82867 (XFree86), uid 0: exited on signal 6 pid 82922 (XFree86), uid 0: exited on signal 6 pid 83053 (XFree86), uid 0: exited on signal 6 pid 83107 (XFree86), uid 0: exited on signal 6 ######################################################### ######################################################### agp0@pci0:0:0: class=0x060000 card=0x00001106 chip=0x30991106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8366/A,VT8367 Apollo KT266/A,KT333 CPU to PCI Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0991106 rev=0x00 hdr=0x01 vendor = 'VIA Technologies Inc' device = 'VT8366/A,VT8367 Apollo KT266/A,KT333 PCI to AGP Bridge' class = bridge subclass = PCI-PCI fxp0@pci0:6:0: class=0x020000 card=0x10308086 chip=0x10308086 rev=0x08 hdr=0x00 vendor = 'Intel Corporation' device = '82559 PCI Networking device' class = network subclass = ethernet ahc0@pci0:7:0: class=0x010000 card=0x78509004 chip=0x50789004 rev=0x03 hdr=0x00 vendor = 'Adaptec Inc' device = 'AVA-2902I/E,AVA-2904,AVA-2910 (AIC-7850P) Fast/Wide SCSI II' class = mass storage subclass = SCSI bktr0@pci0:8:0: class=0x040000 card=0x13eb0070 chip=0x036e109e rev=0x11 hdr=0x00 vendor = 'Brooktree Corporation' device = 'Bt878 MediaStream Controller' class = multimedia subclass = video none0@pci0:8:1: class=0x048000 card=0x13eb0070 chip=0x0878109e rev=0x11 hdr=0x00 vendor = 'Brooktree Corporation' device = 'Bt878 Video Capture (Audio Section)' class = multimedia ohci0@pci0:11:0: class=0x0c0310 card=0x00351033 chip=0x00351033 rev=0x41 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210FGC-7EA USB Host Controller' class = serial bus subclass = USB ohci1@pci0:11:1: class=0x0c0310 card=0x00351033 chip=0x00351033 rev=0x41 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD9210FGC-7EA USB Host Controller' class = serial bus subclass = USB none1@pci0:11:2: class=0x0c0320 card=0x35041462 chip=0x00e01033 rev=0x02 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'uPD720100A USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB atapci0@pci0:12:0: class=0x010485 card=0x1275105a chip=0x5275105a rev=0x01 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20276 Ultra133 TX2/FastTrak TX Lite EIDE Controller' class = mass storage subclass = RAID isab0@pci0:17:0: class=0x060100 card=0x00001106 chip=0x31471106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8233A PCI to ISA Bridge' class = bridge subclass = PCI-ISA atapci1@pci0:17:1: class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' class = mass storage subclass = ATA uhci0@pci0:17:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x23 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci1@pci0:17:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x23 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB pcm0@pci0:17:5: class=0x040100 card=0x47201462 chip=0x30591106 rev=0x40 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8233 AC'97 Enhanced Audio Controller' class = multimedia subclass = audio drm0@pci1:0:0: class=0x030000 card=0x7161174b chip=0x51571002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies' device = 'RV200 Radeon 7500' class = display subclass = VGA -- /----------------------------------------------------------------\ | Bob Bomar [EMAIL PROTECTED] http://www.bomar.us/~bob | |================================================================| | FreeBSD: The Power to Serve. http://www.freeBSD.org | \----------------------------------------------------------------/
msg14797/pgp00000.pgp
Description: PGP signature