I run 10-current on Compaq 6715s.
It's very hot and noisy. If I boot
in verbose mode, I get lots of:
acpi_tz0: _AC2: temperature 92.0 >= setpoint 50.0
acpi_tz0: _AC1: temperature 92.0 >= setpoint 60.0
acpi_tz0: _AC3: temperature 92.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 92.0 >= setpoint 50
On Tue, May 1, 2012 at 8:06 AM, Anton Shterenlikht wrote:
> I run 10-current on Compaq 6715s.
> It's very hot and noisy. If I boot
> in verbose mode, I get lots of:
>
> acpi_tz0: _AC2: temperature 92.0 >= setpoint 50.0
> acpi_tz0: _AC1: temperature 92.0 >= setpoint 60.0
> acpi_tz0: _AC3: temperatu
On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
> On Tue, May 1, 2012 at 8:06 AM, Anton Shterenlikht
> wrote:
> > I run 10-current on Compaq 6715s.
> > It's very hot and noisy. If I boot
> > in verbose mode, I get lots of:
> >
> > acpi_tz0: _AC2: temperature 92.0 >= setpoint 50.0
On Tue, May 1, 2012 at 8:41 AM, Anton Shterenlikht wrote:
> On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
>> On Tue, May 1, 2012 at 8:06 AM, Anton Shterenlikht
>> wrote:
>> > I run 10-current on Compaq 6715s.
>> > It's very hot and noisy. If I boot
[..]
> I didn't even know t
On Tue, 1 May 2012 13:41:11 +0100, Anton Shterenlikht wrote:
> On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
> > On Tue, May 1, 2012 at 8:06 AM, Anton Shterenlikht
> > wrote:
> > > I run 10-current on Compaq 6715s.
> > > It's very hot and noisy. If I boot
> > > in verbose mode,
Hi,
On Tuesday 01 May 2012 19:41:11 Anton Shterenlikht wrote:
> On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
> > On Tue, May 1, 2012 at 8:06 AM, Anton Shterenlikht
> > wrote:
>
> I didn't even know they put fluid heatsinks in laptop.
> I thought this was something from IBM c
Hi,
On Tuesday 01 May 2012 20:52:11 Polytropon wrote:
> On Tue, 1 May 2012 13:41:11 +0100, Anton Shterenlikht wrote:
> > On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
>
> Not a big issue. Make sure you can remember which parts belong where.
> Make photos if it helps you, or dra
On Wed, 2 May 2012 06:19:50 +0700, Erich Dollansky wrote:
> Hi,
>
> On Tuesday 01 May 2012 20:52:11 Polytropon wrote:
> > On Tue, 1 May 2012 13:41:11 +0100, Anton Shterenlikht wrote:
> > > On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro Imass wrote:
> >
> > Not a big issue. Make sure you can
Hi,
On Wednesday 02 May 2012 19:09:56 Polytropon wrote:
> On Wed, 2 May 2012 06:19:50 +0700, Erich Dollansky wrote:
> > On Tuesday 01 May 2012 20:52:11 Polytropon wrote:
> > > On Tue, 1 May 2012 13:41:11 +0100, Anton Shterenlikht wrote:
> > > > On Tue, May 01, 2012 at 08:25:11AM -0400, Alejandro I
On 08/05/2012 15:06, Anton Shterenlikht wrote:
Anyway, this was easier than I expected.
I removed a lot of dust from the fan
and the heat sink gills. I also replaced
the "thermal material".
I prop my mine up off the desk to get better airflow to the fan intake
which is on the underside. The f
10 matches
Mail list logo