Hello While installing FreeBSD 9.0 i386 on a Soekris net6501 I ran into some problems regarding the serial console. Those problems and their workarounds are described below -- for the archives, in case someone runs into them as well.
After having read section 27.6 "Setting Up the Serial Console" from the "FreeBSD Handbook" and the man pages related to boot(8) and loader(8) I decided to go for the option to configure the serial console using boot.config(5). I wrote the FreeBSD 9.0 i386 memstick image to a memory stick, mounted the root file system and created boot.config therein, containing '-h -S57600' on a single line (yes, without the quotes ;-)). But booting from this stick failed with > boot 82 <- Soekris comBIOS prompt /bInvalid format followed by a system reboot. However, this was not always reproducible; every now and then booting succeeded. Coincidentally I noticed that with the two boot(8) arguments swapped (i.e. with '-S57600 -h'), booting seems to always succeed: > boot 82 /boot.config: -S57600 -h Consoles: serial port [...] A similar (same?) problem seems to exist when booting the installed system from hard disk: if /boot.config contains '-h -S57600', booting fails with > boot <- Soekris comBIOS prompt /b being output, after which the system seems to freeze -- at least no reboot and no disk access seem to happen. When swapping the order of boot(8) arguments (i.e. '-S57600 -h'), the system boots fine: > boot /boot.config: -S57600 -h Consoles: serial port [...] At least according to its man page, boot(8) seems to require the console speed option to be passed as a last option -- or am I missing something? BTW, I just noticed that these boot failures only seem to happen with particular speed settings: while with 57600 and 38400 the problem takes place as described above, with 19200 and 9600 it does _not_, i.e. the system boots fine. Hmm, any hints? Cheers, Jukka -- This email fills a much-needed gap in the archives. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"