Hello all, Not having gotten a response to my last inquiry, and being increasingly desperate, I have continued testing to try to find what is wrong with djbdns on my new FreeBSD installation.
I discovered it was working on another FreeBSD system, which has two significant differences: 1) djbdns has been on it for a while, having been installed well before the current version of FreeBSD, and 2) the packet filter configuration is a lot simpler (the system is a server not a router). For the router (with the new installation), I had copied the old pf.conf from its previous incarnation as an OpenBSD system, where it seemed to work fine. But it was in desperate need of some housecleaning, so hoping to make it more rational, I went about doing just that (and discovering lots of ucky redundancies). But now ssh is broken, and I don't understand why. So my question now is, why and how is this pf configuration wrong? I still don't get through to dnscache, and ssh dropped connections within a minute or so of the time I put this pf.conf in place. Worse, I don't seem to be getting all the logging I asked for. I don't see a block message in the tcpdump output. Attached are two files: 1) /etc/pf.conf and 2) the tcpdump output. Thanks! -- David Benfell, LCP [EMAIL PROTECTED] --- Resume available at http://www.parts-unknown.org/ NOTE: I sign all messages with GnuPG (0DD1D1E3).
# $OpenBSD: pf.conf,v 1.19 2003/03/24 01:47:28 ian Exp $
#
# See pf.conf(5) and /usr/share/pf for syntax and examples.
# Required order: options, normalization, queueing, translation, filtering.
# Macros and tables may be defined and used anywhere.
# Note that translation rules are first match while filter rules are last match.
# Macros: define common values, so they can be referenced and changed easily.
#ext_if="ext0" # replace with actual external interface name i.e., dc0
ext_if="xl0"
#int_if="int0" # replace with actual internal interface name i.e., dc1
int_if="dc0"
dmz_if="sf3"
voip_cfg_if="sf1"
pub_if="sf0"
local_if="lo0"
#lupin_if="sf1"
#internal_net="10.1.1.1/8"
internal_net="192.168.18.1/24"
external_addr="66.93.170.242"
internal_addr="192.168.18.1"
routable_subnet="66.93.170.241/28"
dmz_net="192.168.19.0/24"
dmz_addr="192.168.19.242"
voip_cfg="192.168.102.1"
voip_local="192.168.102.2"
mta_ad = "192.168.19.242"
mta_pt = "25"
dhcp_net="192.168.20.0/24"
#lupin_net="192.168.100.0/24"
public_admin_net="192.168.17.0/24"
starshine="216.240.40.161/27"
allowed_nets="{ $starshine, $dmz_net, $internal_net }"
trusted_external="{ 12.22.55.0/24 64.0.0.0/4 134.154.0.0/16 216.240.40.161/27 }"
# Doubletree Local CSU Hayward starshine.org
earth_ext="66.93.170.243"
earth_dmz="192.168.19.243"
earth_int="192.168.18.43"
dnscache="192.168.19.4"
kindling_ext="66.93.170.244"
kindling_int="192.168.19.244"
home_ext="66.93.170.245"
home_int="192.168.18.44"
raven_ext="66.93.170.246"
raven_int="192.168.18.45"
lair_ext="66.93.170.247"
lair_int="192.168.18.46"
thunder_ext="66.93.170.248"
thunder_int="192.168.18.47"
voip_ext="66.93.170.254"
#lupin_ext="66.93.170.254"
non_routable="{ 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, 169.254.0.0/16 }"
macintoshes="{ $lair_ext, $lair_int, $thunder_ext, $thunder_int }"
linux_pcs="{ $dnscache, $kindling_ext, $kindling_int, $home_ext, $home_int,
$raven_ext, $raven_int }"
auth_local="{ $lair_ext, $lair_int, $thunder_ext, $thunder_int \
$earth_ext, $earth_dmz, $dnscache, $kindling_ext, $kindling_int,
$home_ext, $home_int, $raven_ext, $raven_int }"
#lupin_router="192.168.100.1"
#lupin_net="192.168.100.0/24"
dmz_services="port { 4, http, ftp-data, ftp, domain, ntp }"
tcp_udp="proto { tcp, udp }"
in_out="{ in, out }"
# Tables: similar to macros, but more flexible for many addresses.
#table <foo> { 10.0.0.0/8, !10.1.0.0/16, 192.168.0.0/24, 192.168.1.18 }
# Options: tune the behavior of pf, default values are given.
#set timeout { interval 30, frag 10 }
#set timeout { tcp.first 120, tcp.opening 30, tcp.established 86400 }
#set timeout { tcp.closing 900, tcp.finwait 45, tcp.closed 90 }
#set timeout { udp.first 60, udp.single 30, udp.multiple 60 }
#set timeout { icmp.first 20, icmp.error 10 }
#set timeout { other.first 60, other.single 30, other.multiple 60 }
#set limit { states 10000, frags 5000 }
#set loginterface none
#set optimization normal
set block-policy drop
#set block-policy return
#set require-order yes
# Normalization: reassemble fragments and resolve or reduce traffic ambiguities.
#scrub in from any to any
scrub in all
# Queueing: rule-based bandwidth control.
#altq on $ext_if bandwidth 2Mb cbq queue { dflt, developers, marketing }
#altq on $ext_if bandwidth 1.5Mb cbq queue { dflt, tor }
#queue dflt bandwidth 5% cbq(default)
#queue developers bandwidth 80%
#queue marketing bandwidth 15%
#queue dflt bandwidth 85% cbq(default) priority 3
#queue tor bandwidth 15% priority 1
# Translation: specify how addresses are to be mapped or redirected.
# nat: packets going out through $ext_if with source address $internal_net will
# get translated as coming from the address of $ext_if, a state is created for
# such packets, and incoming packets will be redirected to the internal address.
rdr on $ext_if proto tcp from <spamd> to any port smtp -> 127.0.0.1 port 8025
# block SMTP from Hotmail and other spammer networks
# hotmail.com
rdr on $ext_if proto tcp from 65.54/16 to any port smtp -> 127.0.0.1 port 8025
rdr on $ext_if proto tcp from 64.4/16 to any port smtp -> 127.0.0.1 port 8025
# prod-infinitum.com.mx
rdr on $ext_if proto tcp from 201.153.0.0/16 to any port smtp -> 127.0.0.1 port
8025
# voyager.net
rdr on $ext_if proto tcp from 216.93.66.0/24 to any port smtp -> 127.0.0.1 port
8025
#rdr on $ext_if proto tcp from any to any port smtp -> $mta_ad port $mta_pt
# FTP
rdr on { $int_if,$pub_if } proto tcp from any to any port ftp -> 127.0.0.1
#nat on $ext_if from $internal_net to any -> ($ext_if)
#binat on $ext_if from $earth_dmz to any -> $earth_ext
binat on $dmz_if from $earth_dmz to any -> $internal_addr
binat on $ext_if from $home_int to any -> $home_ext
binat on $ext_if from $raven_int to any -> $raven_ext
binat on $ext_if from $lair_int to any -> $lair_ext
binat on $ext_if from $thunder_int to any -> $thunder_ext
#binat on $ext_if from $lupin_router to any -> 66.93.170.253
nat on $ext_if from $internal_net to any -> $external_addr
nat on $ext_if from $dhcp_net to any -> $external_addr
nat on $voip_cfg_if from $internal_net to any -> 192.168.102.2
nat on $dmz_if from $dhcp_net to any -> $dmz_addr
#nat on $ext_if from $lupin_net to any -> $lupin_ext
# rdr: packets coming in on $ext_if with destination $external_addr:1234 will
# be redirected to 10.1.1.1:5678. A state is created for such packets, and
# outgoing packets will be translated as coming from the external address.
#rdr on $ext_if proto tcp from any to $external_addr/32 port 1234 -> 10.1.1.1
port 5678
# rdr NTP for the GPS time source to the internal network. Hopefully, this way,
# the time source will answer.
#rdr on $dmz_if $tcp_udp from any to 192.168.18.10/32 port ntp -> $earth_int
# rdr outgoing FTP requests to the ftp-proxy
#rdr on $int_if proto tcp from any to any port ftp -> 127.0.0.1 port 8021
# spamd-setup puts addresses to be redirected into table <spamd>.
table <spamd> persist
no rdr on { lo0, lo1 } from any to any
rdr inet proto tcp from <spamd> to any port smtp -> 127.0.0.1 port 8025
# redirect connections from spammers to spamd, all legitimate
# connections will not be redirected
#rdr on $ext_if inet proto tcp \
#from <spamd> to ($ext_if) port 25 -> 127.0.0.1 port 8025
# block IPv6
block in quick inet6 all
antispoof log quick for { $ext_if, $pub_if }
pass in log quick on lo0 from any to any
# enable authpf rules
anchor "authpf/*"
# pass redirected connections to spamd listening on the local
# loop interface (lo0)
pass in log quick on lo0 inet proto tcp \
from <spamd> to 127.0.0.1 port 8025
#allow SMTP, DNS, ICMP
pass in log quick on $int_if inet proto tcp from any to any port { smtp, domain
} flags S/SA synproxy state
pass in log quick on $int_if inet proto udp from any to any port domain
pass log quick proto icmp all
#block the outside world unless...
block in log on { $ext_if, $pub_if } all
#allow access to the outside world unless...
pass out log on { $ext_if, $pub_if } all
# protect VOIP configuration
pass out log quick on $voip_cfg_if proto tcp from $internal_net to any flags
S/SA synproxy state
#allow ssh, printing from trusted networks
pass log quick on $ext_if proto tcp from $trusted_external to any port ssh
flags S/SA synproxy state
pass log quick on { $int_if, $dmz_if, $pub_if } proto tcp from any to any port
{ ssh, 515, 631 } flags S/SA synproxy state
pass in log quick on $ext_if proto tcp from $trusted_external to 192.168.18.20
port { 515, 631 } flags S/SA synproxy state
#block ports used by W32.Blaster.Worm, per Speakeasy alert 12 Aug 2003
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
134 >< 140
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
445
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
593
#block ports recommended by CERT
block in log quick on { $ext_if, $pub_if } inet proto udp from any to any port
69
block in log quick on { $ext_if, $pub_if } inet proto tcp from any to any port
87
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
111
block in log quick on { $ext_if, $pub_if } inet proto tcp from any to any port
511 >< 516
block in log quick on { $ext_if, $pub_if } inet proto tcp from any to any port
540
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
2000
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
2049
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
5999 >< 6064
#block ports recommended by Felix von Leitner
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
5000
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
1025
#LDAP stuff
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
ldap
block in log quick on { $ext_if, $pub_if } inet $tcp_udp from any to any port
ldaps
#pass in log quick on $int_if inet $tcp_udp from any to any port ldap
#pass in log quick on $int_if inet $tcp_udp from any to any port ldaps
#allow non-privileged ports anywhere
pass log quick $tcp_udp from any to any port>1023 flags S/SA synproxy state
#allow Tor services to router
pass in $tcp_udp from any to { $external_addr, $internal_addr } port { 9001,
9030 } flags S/SA synproxy state
#allow FTP to ftp-proxy
pass in on $ext_if inet proto tcp from port ftp-data to 127.0.0.1 user proxy
flags S/SA synproxy state
#allow internal access to and from DMZ
pass in log quick $tcp_udp from { $internal_net, $dmz_net } to {
$internal_net, $dmz_net } flags S/SA synproxy state
pass out log quick $tcp_udp from { $internal_net, $dmz_net } to {
$internal_net, $dmz_net } flags S/SA synproxy state
#allow Internet access here
pass in log quick on { $dmz_if, $int_if, $pub_if } $tcp_udp from {
$internal_net, $dmz_net, $dhcp_net } to any flags S/SA synproxy state
# pass incoming ports for ftp-proxy
#pass in on $ext_if inet proto tcp from any to $ext_if user proxy keep state
queue dflt
# assign packets to a queue.
#pass out on $ext_if from 192.168.0.0/24 to any keep state queue developers
queue dflt
#pass out on $ext_if from 192.168.1.0/24 to any keep state queue marketing
queue dflt
000000 rule 48/0(match): pass in on sf3: 192.168.19.243.59056 > 192.168.19.1.22: S 1612290154:1612290154(0) win 65535 <mss 1460,nop,wscale 1,[|tcp]> 000165 rule 136/0(match): pass out on lo0: 192.168.19.243.59056 > 192.168.19.1.22: S 2124243001:2124243001(0) win 0 <mss 1460>
pgphFmywPEVdv.pgp
Description: PGP signature
