On Wed, 2004-Dec-15 19:16:59 -0500, asym wrote:
[audio jukebox]
what would be your recommendations for this particular (and very limited)
application?
Honestly I'd probably go for a RAID1+0 setup. It wastes half the space in
total for mirroring, but it has none of the performance penalties of
$20 just sent via paypal
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello,
first of all: good choice choosing *BSD/UNIX.
Mauricio Brunstein wrote:
I am new to FreeBSD, and UNIX in general but form the beginning I'm
fascinated. I had configured a FreeBSD 5.3 machine to be the
Firewall/gateway of 8 windows PC's. The machine has 2 interfaces one
(fxp0) is
Hi,
The nmbcluster option from the kernel config file is no longer possible in
5.3. Instead the systctl kern.ipc.nmbclusters should be used now in
/boot/loader.conf? Normally i would set this value to 65535 (maximum
value?) in order to make fbsd handle lots and lots of connections.
So i should
On Thu, Dec 16, 2004 at 01:45:50PM +, Bjoern A. Zeeb wrote:
@@ -2490,8 +2495,10 @@ sk_init_yukon(sc_if)
YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) );
/* serial mode register */
- SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) |
-
On Thu, 16 Dec 2004, Michal Belczyk wrote:
On Thu, Dec 16, 2004 at 01:45:50PM +, Bjoern A. Zeeb wrote:
@@ -2490,8 +2495,10 @@ sk_init_yukon(sc_if)
YU_TPR_JAM_IPG(0xb) | YU_TPR_JAM2DATA_IPG(0x1a) );
/* serial mode register */
- SK_YU_WRITE_2(sc_if, YUKON_SMR,
Randy Bush [EMAIL PROTECTED] probably said:
$20 just sent via paypal
Got it, thanks !
P.
--
pir
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
Peter Radcliffe wrote:
Randy Bush [EMAIL PROTECTED] probably said:
$20 just sent via paypal
Got it, thanks !
P.
hehe, What else does Soren need badly? I can don one of those Christmas
suites the Salvation Army uses, and collect money for BSD at the mall.
LOL.
Rob.
Setting it to zero means it's unlimited.
Be careful.
-Bosko
On Thu, Dec 16, 2004 at 02:42:02PM +0100, Mipam wrote:
Hi,
The nmbcluster option from the kernel config file is no longer possible in
5.3. Instead the systctl kern.ipc.nmbclusters should be used now in
/boot/loader.conf?
I own a Promise Fasttrak SX4000 and was wondering where the driver is :s
Promise advertises with compatibility of the controller with FreeBSD 4.x
both on the site and in the manual but the driver is NOWHERE to be found..
ive searched far and wide for it and have seen this question over and over
Hi !
Anybody knows why I need to run routed to have access to the box from
the Internet?
In the FreeBSD manual states that one must use router_enable=NO in
rc.conf, to avoid routed to delete the routes added by ppp. If I do
this, I can't have access to the box from the Internet by means of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tony Wijnhard wrote:
| I own a Promise Fasttrak SX4000 and was wondering where the driver
| is :s Promise advertises with compatibility of the controller with
| FreeBSD 4.x both on the site and in the manual but the driver is
| NOWHERE to be found..
David:
I have acces TO the internet without routed, but not FROM the Internet
to my box.
Regards,
Mauricio.
On Thu, 16 Dec 2004 19:38:36 -0800 (PST), David Wolfskill
[EMAIL PROTECTED] wrote:
Date: Thu, 16 Dec 2004 23:46:44 -0300
From: Mauricio Brunstein [EMAIL PROTECTED]
Anybody knows
In message: [EMAIL PROTECTED]
Ivan Voras [EMAIL PROTECTED] writes:
: It seems devd.conf works only for static devices, not hotplugged,
: while devfs rules works for those, but they vanish on reboot.
That's not true. devd devinitely deals with hotplugged devices. I
use it all the
In message: [EMAIL PROTECTED]
Kim Culhan [EMAIL PROTECTED] writes:
:
: Just upgraded to the latest -stable.
:
: When I try to use tip with /dev/com0 it returns:
:
: /dev/ucom0: No such file or directory
: link down
:
: I added device ucom and device ubsa to the kernel config
: but
You might also log 'sysctl vm.kvm_free' and 'sysctl vm.zone'.
I just got another netstat: kvm_read: Bad address. vm.kvm_free was
675278848 two seconds earlier and a couple of seconds later (and also
currently).
The output from vm.zone a couple of seconds after:
vm.zone:
ITEMSIZE
On Wed, 15 Dec 2004, Heinz Knocke wrote:
Hi,
I got the the latest RELENG_5 and nothing's changed :( Still cannot send
jumbo packets.
But I tried this patch
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_sk.c.diff?r1=1.51r2=1.52
and IT WORKED :)) I'm almost sure that these
Hello,
during the last weeks I have some hangup-problems on my FreeBSD-5.3
server. It seems to me that after the following error messages in syslog
the server freezes and doesn't even respond to ping- and
ssh-connection-attempts.
The messages in my /var/log/messages file:
Dec 16 17:34:03
I just took delivery of a Dell PE800 tower server. I installed
5.3-RELEASE amd64 on it, but it is not finding any ethernet device
(there is one built into the mobo).
According to the Dell PE800 spec sheet
(http://www.dell.com/downloads/global/products/pedge/en/800_specs.pdf)
it is a Single
Hello!
I have a problem with Intel(R) PRO/1000 card (Intel 82540) - it does not
initialize properly during boot process.
I've got these error messages in /var/log/messages:
...
Dec 16 19:27:36 zahrouer kernel: pci2: PCI bus on pcib2
Dec 16 19:27:36 zahrouer kernel: em0: Intel(R) PRO/1000
20 matches
Mail list logo
