Is there something else I'm blatantly missing?
If my memory serves me correctly, you need to explicitely force the
interface up, eg:
# ifconfig wi0 up
After setting the SSID. Mine works after doing this, it's an ASUS
WL-100.
--
Rink P.W. Springer-
* Tony Arcieri [EMAIL PROTECTED] [20050513 03:21]:
Is there some easy way to reverse this order, so svscan is started first and
jails started afterward?
Follow the author's instructions, and put this line into /etc/rc.local:
csh -cf '/command/svscanboot '
qvb
--
pica
Some time ago, there were complaints that nForce chipsets don't work very
well on FreeBSD - specifically various components like built-in NIC, sound
card, ACPI...
Is this still true? What about nForce4 (PCI-Express) support?
(I'm interested in 5.x branch only)
--
Every sufficiently advanced
On Fri, 13 May 2005, Joan Picanyol i Puig wrote:
* Tony Arcieri [EMAIL PROTECTED] [20050513 03:21]:
Is there some easy way to reverse this order, so svscan is started first and
jails started afterward?
Follow the author's instructions, and put this line into /etc/rc.local:
csh -cf
Thus spake Ivan Voras ([EMAIL PROTECTED]) [13/05/05 07:37]:
: Some time ago, there were complaints that nForce chipsets don't work very
: well on FreeBSD - specifically various components like built-in NIC, sound
: card, ACPI...
:
: Is this still true? What about nForce4 (PCI-Express) support?
On 5/12/05, Tony Arcieri [EMAIL PROTECTED] wrote:
After playing around with rcNG a bit more I think I have a better grasp of how
to fix my djbdns and jails problem. However I was wondering why rcorder
wasn't
run on /usr/local/etc/rc.d/* in addition to /etc/rc.d/* in /etc/rc
1. /usr/local
On Fri, 13 May 2005 10:39:48 -0400, Damian Gerow
[EMAIL PROTECTED] wrote:
Thus spake Ivan Voras ([EMAIL PROTECTED]) [13/05/05 07:37]:
: Some time ago, there were complaints that nForce chipsets don't work
very : well on FreeBSD - specifically various components like
built-in NIC, sound :
In message: [EMAIL PROTECTED]
Kirk Strauser [EMAIL PROTECTED] writes:
: I've finally coerced FreeBSD 5.4 to see my PCMCIA WLAN card (with many thanks
: to Warner), but it always reports status: no carrier. I'm attempting to
: connect to an open WAP that broadcasts it's SSID, so my
On Thu, May 12, 2005 at 05:16:47PM +0200, Ronald Klop wrote:
On Thu, 12 May 2005 16:48:36 +0200, Matthias Buelow [EMAIL PROTECTED] wrote:
The machine is a Compaq Armada m700, kernel is GENERIC from fresh
installation; dmesg output is attached.
Yes, I have apm build into the kernel. Does your
On Thu, 12 May 2005, Rainer Duffner wrote:
Hi,
I installed FreeBSD5.4 on a server with a 3ware 7006-2 controller and
two 120GB disks as RAID1
I cannot boot this install. (I get some kind of panic or endless loop,
but the display is re-painted so fast I cannot read it).
What I *can* do is
On Thu, 12 May 2005, jmc wrote:
I've got 5.4 amd64 installed on an Opteron server and I cannot get it to
reliably transmit packets larger than 80 bytes using the bge driver (on a
BCM5703 NIC). It receives large packets without any problem, but it just
won't transmit them. (I can tcpdump all
On Friday 13 May 2005 04:06 pm, M. Warner Losh wrote:
Kirk's dmesg showed some interesting IRQ routing issues that might be
the problem:
pir0: PCI Interrupt Routing Table: 4 Entries on motherboard
$PIR: BIOS IRQ 11 for 0.7.INTA is not valid for link 0x22
$PIR: BIOS IRQ 11 for 0.7.INTB is
lists:
DELL PE2850 freezes with the 5.4-Release SMP GENERIC kernel
while runing X for a few minutes.and it seems caused by Xorg's
bug? https://bugs.freedesktop.org/show_bug.cgi?id=2880
my system msgs and the xorg packages install by FBSD-5.4-RELEASE_disc1
FreeBSD rts.eq.cn 5.4-RELEASE FreeBSD
In message: [EMAIL PROTECTED]
Kirk Strauser [EMAIL PROTECTED] writes:
: On Friday 13 May 2005 04:06 pm, M. Warner Losh wrote:
:
: Kirk's dmesg showed some interesting IRQ routing issues that might be
: the problem:
:
: pir0: PCI Interrupt Routing Table: 4 Entries on motherboard
:
14 matches
Mail list logo
