--- Peter Jeremy [EMAIL PROTECTED] wrote:
Since your /home is almost empty, how about
(temporarily) moving the contents into /usr and
swapping onto ad0s1e rather than into a
swapfile. This should at least enable you to
build a debug kernel.
I'm now indeed building a new kernel, without
One more thing, for those who are reading this thread.
Concerning my kernel locking up while using a
swapfile:
I had an infinite while loop running during the
kernel compilation, printing out 'swapinfo' every
15 seconds. The last output before the machine goes
dead is this:
/dev/ad0s1b
On Tue, 2005-Nov-15 02:08:12 -0800, Rob wrote:
makeoptions DEBUG=-g
options INVARIANTS
options WITNESS
options WITNESS_KDB
options KDB
options DDB
options DDB_NUMSYM
options GDB
Is that enough?
If your system is headless, you probably want 'options BREAK_TO_DEBUGGER'
as well.
First
I've stuck a Promise TX4300 controller in to replace
the marvell onboard SATA that I can't boot off on a
Supermicro server. If I set 2 discs up as Raid 0
or Raid 1 it's fine, But 4 discs as Raid 0+1 is detected,
installs without any problems, but hangs at the boot
loader with elf32_loadimage:
Rob [EMAIL PROTECTED] wrote:
Kris Kennaway [EMAIL PROTECTED] wrote:
Since you can compile a kernel without it, add DDB,
WITNESS and INVARIANTS support, then trigger the
deadlock with the swapfile, break to DDB and
examine the state of the machine. See the chapter
on kernel
On Fri, 2005-11-11 at 22:57 -0800, Ade Lovett wrote:
On Nov 11, 2005, at 12:51 , Amit Rao wrote:
0) Upgrade to Seagate 10K.7 drive firmware level 0008. That seems
to help. One ahd sequencer error message still appears at boot,
but after that it seems to work (with your fingers crossed).
--- Peter Jeremy [EMAIL PROTECTED] wrote:
On Tue, 2005-Nov-15 02:08:12 -0800, Rob wrote:
makeoptions DEBUG=-g
options INVARIANTS
options WITNESS
options WITNESS_KDB
options KDB
options DDB
options DDB_NUMSYM
options GDB
Is that enough?
If your system is headless, you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi guys,
I'm running an Fujitsu-Siemens Primergy RX300 dual-XEON hyperthreading
enabled server with an onboard LSI MegaRAID controller and an Adaptec
39320A Ultra320 dual channel SCSI adapter. The LSI MegaRAID controller is
configured to RAID1
Hi,
On Mon, 14 Nov 2005 12:40:36 -0500
Pierre-Luc Drouin [EMAIL PROTECTED] said:
pldrouin Yep, smart battery is definately the problem. The performance of my
pldrouin laptop is back to normal when I remove the xfce4-battery-plugin.
pldrouin acpiconf -i loop reproduces the problem for me too.
On Tue, Nov 15, 2005 at 07:16:47AM -0800, Rob wrote:
--- Peter Jeremy [EMAIL PROTECTED] wrote:
On Tue, 2005-Nov-15 02:08:12 -0800, Rob wrote:
makeoptions DEBUG=-g
options INVARIANTS
options WITNESS
options WITNESS_KDB
options KDB
options DDB
options DDB_NUMSYM
On Tue, Nov 15, 2005 at 02:15:37AM -0800, Rob wrote:
One more thing, for those who are reading this thread.
Concerning my kernel locking up while using a
swapfile:
I had an infinite while loop running during the
kernel compilation, printing out 'swapinfo' every
15 seconds. The last
Hajimu UMEMOTO wrote:
Hi,
On Mon, 14 Nov 2005 12:40:36 -0500
Pierre-Luc Drouin [EMAIL PROTECTED] said:
pldrouin Yep, smart battery is definately the problem. The performance of my
pldrouin laptop is back to normal when I remove the xfce4-battery-plugin.
pldrouin acpiconf
Pierre-Luc Drouin wrote:
Hajimu UMEMOTO wrote:
On Mon, 14 Nov 2005 12:40:36 -0500
Pierre-Luc Drouin [EMAIL PROTECTED] said:
pldrouin Yep, smart battery is definately the problem. The
performance of my pldrouin laptop is back to normal when I remove the
xfce4-battery-plugin. pldrouin acpiconf
FWIW, we have a 6.0-RELEASE machine running now with two 2TB
partitions, using disklabel(bsdlabel) rather than gpt. This is with
the 3ware driver. Could the problem you're having be with the arcmsr
driver in some way? Anyone else on the list using that card able to
confirm it?
On Tue, Nov 15, 2005 at 07:16:47AM -0800, Rob wrote:
--- Peter Jeremy [EMAIL PROTECTED] wrote:
On Tue, 2005-Nov-15 02:08:12 -0800, Rob wrote:
makeoptions DEBUG=-g
options INVARIANTS
options WITNESS
options WITNESS_KDB
options KDB
options DDB
options DDB_NUMSYM
On Tue, Nov 15, 2005 at 09:38:16AM +0200, Anatoli Marinov wrote:
A I try to use pptp (pptpclient) and ppp connection to my ISP with FreeBSD
A 6-STABLE.
A If I compile pptp from ports after installation it works in user land and
A consume 50-60% from my CPU time (for 200 KB/sec).
A Before
On Tue, Nov 15, 2005 at 02:15:37AM -0800, Rob wrote:
One more thing, for those who are reading this thread.
Concerning my kernel locking up while using a
swapfile:
I had an infinite while loop running during the
kernel compilation, printing out 'swapinfo' every
15 seconds. The last
On Tue, Nov 15, 2005 at 09:49:57PM +0100, Lars Kristiansen wrote:
On Tue, Nov 15, 2005 at 02:15:37AM -0800, Rob wrote:
One more thing, for those who are reading this thread.
Concerning my kernel locking up while using a
swapfile:
I had an infinite while loop running during the
On Tue, Nov 15, 2005 at 09:44:12PM +0100, Lars Kristiansen wrote:
A couple of the times but not everytime the following message was
repeatedly displayed at the console before freezing:
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 273427, size: 4096
AFAICT that is just a
Nate Lawson wrote:
Pierre-Luc Drouin wrote:
Hajimu UMEMOTO wrote:
On Mon, 14 Nov 2005 12:40:36 -0500
Pierre-Luc Drouin [EMAIL PROTECTED] said:
pldrouin Yep, smart battery is definately the problem. The
performance of my pldrouin laptop is back to normal when I remove
the
On 11/16/05 07:49, Lars Kristiansen wrote:
I had an infinite while loop running during the
kernel compilation, printing out 'swapinfo' every
15 seconds. The last output before the machine goes
dead is this:
/dev/ad0s1b 39848118203984830%
/dev/md0 131072 5908
On Wed, Nov 16, 2005 at 09:26:43AM +1100, Johny Mattsson wrote:
On 11/16/05 07:49, Lars Kristiansen wrote:
I had an infinite while loop running during the
kernel compilation, printing out 'swapinfo' every
15 seconds. The last output before the machine goes
dead is this:
/dev/ad0s1b
On Mon, Nov 14, 2005 at 03:01:19PM -0500, Kris Kennaway wrote:
On Mon, Nov 14, 2005 at 06:45:15PM +0100, Ales wrote:
During boot process under 6.0-STABLE I spoted some strange messages.
Nov 14 18:18:45 romcek savecore: reboot after panic: page fault
Nov 14 18:18:45 romcek savecore: no
hello,
until freebsd 6.0 (that is to say in 5.3 and 5.4) i used
moused_flags=-3 in rc.conf and both my mice worked correctly (or as
desired) -- synaptics touchpad missing 3rd button was emulated while the
wheel on my USB mouse worked as expected.
now, in 6.0, with the same setting, touchpad
On Tue, 15 Nov 2005, Lawrence Farr wrote:
I've stuck a Promise TX4300 controller in to replace
the marvell onboard SATA that I can't boot off on a
Supermicro server. If I set 2 discs up as Raid 0
or Raid 1 it's fine, But 4 discs as Raid 0+1 is detected,
installs without any problems, but
--- Peter Jeremy [EMAIL PROTECTED] wrote:
On Tue, 2005-Nov-15 02:08:12 -0800, Rob wrote:
2) Is such debugging possible on a headless PC
without a keyboard attached?
I do have serial console access.
Yes. See above URL. The advantage is that you can
(hopefully) capture a log of
On Tue, Nov 15, 2005 at 06:09:33PM -0800, Rob wrote:
...
Yes. See above URL. The advantage is that you can
(hopefully) capture a log of your debug session.
Send a serial BREAK and you should get a DDB
prompt.
What is this serial BREAK?
How do I send a serial BREAK at the serial
After hours of head-banging over the past couple of days,
I have finally succeeded in installing EITHER
xorg-clients-6.8.2_1 OR xterm-206_1. Previously,
installing either port told me that it conflicted
with the other, in spite of having cvsupped my
ports tree twice to ensure I was getting the
On Tue, Nov 15, 2005 at 07:18:35PM -0800, David Wolfskill wrote:
On Tue, Nov 15, 2005 at 06:09:33PM -0800, Rob wrote:
...
Yes. See above URL. The advantage is that you can
(hopefully) capture a log of your debug session.
Send a serial BREAK and you should get a DDB
prompt.
On Tue, Nov 15, 2005 at 07:32:45PM -0800, David Wolfskill wrote:
On Tue, Nov 15, 2005 at 07:26:16PM -0800, James Long wrote:
After hours of head-banging over the past couple of days,
I have finally succeeded in installing EITHER
xorg-clients-6.8.2_1 OR xterm-206_1. Previously,
Kris Kennaway wrote this message on Tue, Nov 15, 2005 at 22:35 -0500:
What is this serial BREAK?
How do I send a serial BREAK at the serial
console? Is this some magic key combination?
I'm probably saying something about my age by doing this :-}
A BREAK (in serial
On Tue, Nov 15, 2005 at 07:18:35PM -0800, David Wolfskill wrote:
On Tue, Nov 15, 2005 at 06:09:33PM -0800, Rob wrote:
...
What is this serial BREAK?
How do I send a serial BREAK at the serial
console? Is this some magic key combination?
I'm probably saying something about my age
James Long wrote:
Then I noticed:
=== xorg-clients-6.8.2_1 depends on package: xterm0 - not found
and investigated the Makefile to find why the odd package
name of xterm0.
My portstree from Nov. 12th, has this at this particular place:
RUN_DEPENDS=
Date: Tue, 15 Nov 2005 20:44:25 -0800 (PST)
From: Rob [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
James Long wrote:
Then I noticed:
=== xorg-clients-6.8.2_1 depends on package: xterm0 - not found
and investigated the Makefile to find why the odd package
name of
On Mon, 14 Nov 2005 12:51, Danny Pansters wrote:
I myself am not really doing anything with capturing, but some ideas that
may be helpful:
FWIW, from what I know in ring capture mode the video gets synch'd by the
audio by having enough frames per audio sample. So if audio sample size or
On Tue, Nov 15, 2005 at 07:56:33PM -0800, David Wolfskill wrote:
On Tue, Nov 15, 2005 at 07:49:10PM -0800, James Long wrote:
=== xorg-clients-6.8.2_1 depends on package: xterm0 - not found
and investigated the Makefile to find why the odd package
name of xterm0.
Looks as if the
Daniel O'Connor wrote:
FreeBSD doesn't have rtc.ko.. Mine doesn't anyway :)
I'm not sure how mplayer in FreeBSD stamps frames either.
It's not stock, but /dev/rtc (via rtc.ko) can be had via emulators/rtc
if rtc.ko exists, it's a dependency, to force it to be built you can
frob the
37 matches
Mail list logo
