Any update on kern/94669?
Thanks,
Jason
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Mon, Mar 26, 2007 at 04:44:05PM -0700, Joe Kelsey wrote:
> For that reason, I have decided that the SII3512 is unreliable and will
> replace it with a Promise controller, basically the cheapest one (TX2).
> I hope it works better.
I've been using "cheap" Promise controllers for years, more r
On Monday 26 March 2007 18:38, Mikhail Teterin wrote:
= I'm running a compressed dump now to see, if the data corruption is still
= here.
Yes, it is still here. Although the dump/compression finished "cleanly", the
result is broken:
# gzip -t /store/home.0.gz
gzip: data stream e
Joe Kelsey wrote:
I am having a real hard time with gmirror. I recently bought two new
400G SATA disks and I want to mirror them. I think I am following the
directions, but I am not sure.
I generally do the following steps:
edit /boot/loader.conf to add geom_mirror_load.
reboot into single-
On Monday 26 March 2007 17:35, Søren Schmidt wrote:
= Nopes its the stock AMD and a SiI chip..
Yes, that's correct. Sorry for the confusion.
= Anyhow there has been some changes in that area that actually might fix
= an interrupt routing bogon. Please try the attached patch against an up
= to d
adam radford wrote:
Jon,
This issue should be fixed in the FreeBSD 6.X driver on the 3ware
web-site (9.4.1 codeset). We need to send a kernel patch to update
the in-kernel 6.X driver to the latest version.
I submitted kern/106488 back in December when the first 9650SE
compatible driver was p
Mikhail Teterin wrote:
On Monday 26 March 2007 15:21, Søren Schmidt wrote:
= What HW was this again, there has been alot of updates/changes over the
= last year ?
It is now a quad core (dual CPU) Opteron-275 using IWill's DK8X motherboard.
http://www.google.com/search?q=iwill+dk8x
Th
On Monday 26 March 2007 15:21, Søren Schmidt wrote:
= What HW was this again, there has been alot of updates/changes over the
= last year ?
It is now a quad core (dual CPU) Opteron-275 using IWill's DK8X motherboard.
http://www.google.com/search?q=iwill+dk8x
The SATA controller(s) are b
Hi all,
I compiled pxeboot with TFTP support by doing:
cd /usr/src/sys/boot
make -DLOADER_TFTP_SUPPORT
I have clients booting via PXE and grabbing their root filesystem from a
memory disk. However, there was a long delay in the boot sequence.
tcpdump revealed that after downloading pxeboot, t
Mikhail Teterin wrote:
Over a year later this remains a problem -- exactly as described below...
No other SATA devices are present -- the only other IDE device is the DVD
drive. My main disks are SCSI.
What's MUCH worse is that the (slowly) written data is also often corrupted...
I use the d
On Mon, Mar 26, 2007 at 02:36:27PM -0400, Mikhail Teterin wrote:
> Over a year later this remains a problem -- exactly as described below...
>
> No other SATA devices are present -- the only other IDE device is the DVD
> drive. My main disks are SCSI.
>
> What's MUCH worse is that the (slowly) w
On Mar 26, 2007, at 11:19 AM, Marten wrote:
On Sun, 2007-03-25 at 13:53 -0700, Joe Kelsey wrote:
I am having a real hard time with gmirror. I recently bought two new
400G SATA disks and I want to mirror them. I think I am following
the
directions, but I am not sure.
I have seen lockups, sp
On Sun, 2007-03-25 at 13:53 -0700, Joe Kelsey wrote:
> I am having a real hard time with gmirror. I recently bought two new
> 400G SATA disks and I want to mirror them. I think I am following the
> directions, but I am not sure.
>
I have seen lockups, spontaneous reboots, corrupt filsystems on
Over a year later this remains a problem -- exactly as described below...
No other SATA devices are present -- the only other IDE device is the DVD
drive. My main disks are SCSI.
What's MUCH worse is that the (slowly) written data is also often corrupted...
I use the drive to store our vast col
On Mon, Mar 26, 2007 at 11:30:10AM +0200, Paolo Tealdi wrote..
> Dear all,
>
> i would like to know if HP Q200 FC HBA bus adapter is supported by
> FreBSD. It's sold with HP storageworks MSA1000 SAN kit . It could be
Q200?? In general, most of our adapters are OEM-ed from QLogic. Or from
Emul
On Mar 25, 2007, at 11:59 PM, Christopher Schulte wrote:
As I understand it now, the user has to manually account for this
at OS
install, and adjust the disk layout accordingly... yes?
when was the last time you ran fdisk and it didn't leave some spare
sectors at the end? i don't think y
El dom, 25-03-2007 a las 10:11 -0600, Scott Long escribió:
> Nikolas Britton wrote:
> > Yeah are hardware is nearly identical. I don't remember what I did to
> > my custom driver, I know I fixed some syntax errors and merged in
> > changes that were made on top of the 1.20.00.02 code base. I'm not
On 12/23/-58 20:59, Joe Kelsey wrote:
> I am having a real hard time with gmirror.
> I recently bought two new 400G SATA disks and I want to mirror them. I
> think I am following the directions, but I am not sure.
>
> I generally do the following steps:
>
> edit /boot/loader.conf to add geom_mi
On 3/25/07, Scott Long <[EMAIL PROTECTED]> wrote:
Nikolas Britton wrote:
> Yeah are hardware is nearly identical. I don't remember what I did to
> my custom driver, I know I fixed some syntax errors and merged in
> changes that were made on top of the 1.20.00.02 code base. I'm not
> sure but I th
On Thu, Mar 22, 2007 at 04:44:42PM +0100, Harald Weis wrote:
> I've run Colin Percival's binary upgrade scripts on my spare machine.
> It worked fine from 6.0 t0 6.1.
> For 6.1 to 6.2 the script stops during the
> ``The following files will be removed ...'' phase.
> Exactly same stop for three fres
Paolo Tealdi wrote:
Dear all,
i would like to know if HP Q200 FC HBA bus adapter is supported by
FreBSD. It's sold with HP storageworks MSA1000 SAN kit . It could be a
qlogic card renamed ... or not ?
It probably is.
From http://www.freebsd.org/releases/6.2R/hardware-i386.html :
Cards supp
Dear all,
i would like to know if HP Q200 FC HBA bus adapter is supported by
FreBSD. It's sold with HP storageworks MSA1000 SAN kit . It could be
a qlogic card renamed ... or not ?
Best regards,
Paolo Tealdi
Ing. Paolo Tealdi Servizi Informatici per le Biblioteche
Politecnico T
22 matches
Mail list logo