Hi there,
I've replaced my old desktop with a laptop and a server, which
is mostly working great. Naturally, the server is running
FreeBSD-stable. It's built on an intel i3 MiniITX motherboard
that has lots of SATA sockets, a respectable number of USB
sockets, gigabit ethernet, eSATA, DVI, ... b
Hi all
I have a problem with booting 8.1-stable from compact flash. This maybe some
speed selection issue. I have two verbose dmesg of the same hardware: 7.2
stable and 8.1-stable. The main difference in 7.2 is such message:
ad0: setting PIO4 on ICH5 chip
on 15/11/2010 06:55 Andrew Reilly said the following:
> Hi there,
>
> I've replaced my old desktop with a laptop and a server, which
> is mostly working great. Naturally, the server is running
> FreeBSD-stable. It's built on an intel i3 MiniITX motherboard
> that has lots of SATA sockets, a resp
Hi,
I've been using 8.1-RELEASE on this desktop machine for a few months
already, but only now found the time to look at a couple of problems with
snd_hda and suspend/resume it still has. Maybe someone here has hints to
fix them - I'd be grateful to hear them.
Audio with snd_hda(4) works, but onl
It's been suggested that I make the output of dmidecode (from
ports/sysutils), pciconf -lv and dmesg.boot available, to help
answer my previosu question. Since all of that output is
relatively small and I don't really have a good web site to put
it, I'll just include it, below. Hope this helps!
On Mon, Nov 15, 2010 at 10:52:10AM +0200, Andriy Gapon wrote:
> > If I find a USB-to-RS232 dongle, will the console mechanism be
> > able to find it? I worry that only legacy-16550-ish serial
> > ports need apply.
> >
> > Any other possibilities or common practices?
>
> Is there a firewire port?
On Mon, Nov 15, 2010 at 10:37:09AM +0100, Stefan Walter wrote:
> Hi,
>
[...]
> The other problem is with suspend/resume:
>
> Suspend To RAM (S3) works by using "acpiconf -s 3", and pushing the power
> button wakes the system up again. Everything seems to work, only the LCD
> monitor remains off.
Hi,
Your board has a serial port:
> [stuff deleted]
> /var/run/dmesg.boot:
>
> Copyright (c) 1992-2010 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a register
Bob Bishop wrote:
Hi,
Your board has a serial port:
[...more stuff deleted...]
uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
[etc]
The diagram on page 12 of
http://downloadmirror.intel.com/18702/eng/DH57JG_ProductGuide03_English.pdf
shows the con
Kirill Yelizarov wrote:
> I have a problem with booting 8.1-stable from compact flash. This maybe some
> speed selection issue. I have two verbose dmesg of the same hardware: 7.2
> stable and 8.1-stable. The main difference in 7.2 is such message:
> ad0: setting PIO4 on ICH5 chip
While trying to debug an issue with an em nic, I noticed that if I
unload the kld which previously had the nic using multiple msi
interrupts, and then load it with msix disabled, vmstat -i shows some
funny output
e.g. before
interrupt total rate
irq4: uart0
On Mon, Nov 15, 2010 at 7:05 AM, Alexander Motin wrote:
> Kirill Yelizarov wrote:
>> I have a problem with booting 8.1-stable from compact flash. This maybe some
>> speed selection issue. I have two verbose dmesg of the same hardware: 7.2
>> stable and 8.1-stable. The main difference in 7.2 is s
Quoth Stefan Walter on Monday, 15 November 2010:
> Hi,
>
> I've been using 8.1-RELEASE on this desktop machine for a few months
> already, but only now found the time to look at a couple of problems with
> snd_hda and suspend/resume it still has. Maybe someone here has hints to
> fix them - I'd be
On Monday, November 15, 2010 10:55:24 am Mike Tancsa wrote:
> While trying to debug an issue with an em nic, I noticed that if I
> unload the kld which previously had the nic using multiple msi
> interrupts, and then load it with msix disabled, vmstat -i shows some
> funny output
>
> e.g. before
>
Hello.
Can I from system console ( I use KOI8-R on system console) connect to
remote server with locale ru_RU.UTF-8 and use on him Russian Language?
%uname -a
FreeBSD gray.homenetwork 8.1-RELEASE-p1 FreeBSD 8.1-RELEASE-p1 #15: Fri
Oct 1 16:46:35 EEST 2010
r...@gray.homenetwork:/usr/
Vladimir Vasilenko aka jeltoesolnce wrote:
Hello.
Can I from system console ( I use KOI8-R on system console) connect to
remote server with locale ru_RU.UTF-8 and use on him Russian Language?
%uname -a
FreeBSD gray.homenetwork 8.1-RELEASE-p1 FreeBSD 8.1-RELEASE-p1 #15: Fri
Oct 1 16:46:35 EEST
My load on my i7 920 is certainly higher when I add a 8GB usb stick as
a ZFS cache device.
It seems to use about 10% system load - If I remove the cache device
it drops about 10%. Anyone else seeing this?
With cache device:
CPU: 0.0% user, 0.0% nice, 10.3% system, 0.0% interrupt, 91.5% idle
Me
On Mon, Nov 15, 2010 at 12:03:38PM +, Bob Bishop wrote:
> Your board has a serial port:
> [...more stuff deleted...]
>
> > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> > uart0: [FILTER]
> [etc]
Ha! I'd not noticed that. Wasn't looking for it, I guess.
> The dia
Hello,
this is a call for testers of the merge of fpu_kern_enter/leave(9)
to RELENG_8. The changes are required to fix some issues with VIA
padlock engine, and to actually merge aesni(4) to RELENG_8.
I ask to look at the possible FPU context handling regressions.
Reports from the users of VIA padl
On Mon, Nov 15, 2010 at 09:50:50PM +0100, Christer Solskogen wrote:
> My load on my i7 920 is certainly higher when I add a 8GB usb stick as
> a ZFS cache device.
USB 1.0? 2.0? Dunno even if that would make a difference...
--
Brian Reichert
55 Crystal Ave. #286
Hi,
I have the 8.1 sources, did a buildworld, buildkernel, installkernel,
installworld.
Now I have 8.1 binaries:
server# file /bin/tcsh
/bin/tcsh: ELF 32-bit LSB executable, Intel 80386, version 1
(FreeBSD), dynamically linked (uses shared libs), for FreeBSD 8.1,
stripped
but not the ke
On Sun, Nov 14, 2010 at 10:41:03AM +0100, Ulrich Sp??rlein wrote:
> On Mon, 08.11.2010 at 22:41:12 +0100, Ulrich Sp??rlein wrote:
> > On Sun, 07.11.2010 at 15:10:20 -0800, Pyun YongHyeon wrote:
> > > On Sun, Nov 07, 2010 at 12:24:21PM +0100, Ulrich Sp??rlein wrote:
> > > > On Sat, 06.11.2010 at 23:
On 11/15/2010 4:13 PM, Kostik Belousov wrote:
>
> Patch is at
> http://people.freebsd.org/~kib/misc/releng_8_fpu.1.patch
Hi,
One small failure on the patch
The text leading up to this was:
--
|Index: pc98/include/npx.h
|===
Hi list,
I'm using FreeBSD stable on IBM T60, `acpiconf -s 3` can let T60 into
suspend mode, but then it can't be waked up anyhow.
so my question is, anyone use FreeBSD on IBM T60 and make the
suspend/resume work on it?
--
Regards,
Yue Wu
Key Laboratory of Modern Chinese Medicines
Department o
> I can give a developer remote console / root access to the box if that would
> help. I have a couple days before I will need to nuke the pool and restore it
> from backups.
I haven't heard from anyone that wants to look into this. I need to get the
pool back into service soon. If I don't get
On Tue, Nov 16, 2010 at 1:30 AM, Brian Reichert wrote:
> On Mon, Nov 15, 2010 at 09:50:50PM +0100, Christer Solskogen wrote:
>> My load on my i7 920 is certainly higher when I add a 8GB usb stick as
>> a ZFS cache device.
>
> USB 1.0? 2.0? Dunno even if that would make a difference...
>
This is
> I am no ZFS kernel-code dude or anything, but it is well known that losing
> the ZIL can corrupt things pretty bad with ZFS.
First, thanks for writing back!
I agree that this could be the problem. As I mentioned in my original post,
I followed the steps recommended by "zpool status" - clear
Hi Terry,
I am no ZFS kernel-code dude or anything, but it is well known that losing the
ZIL can corrupt things pretty bad with ZFS.
You may want to skim the archives at OpenSolaris ZFS discuss
All in all, if I was in your situation I would give a whirl at installing
OpenSolaris and going fr
Hi, sorry for not completely digesting your original post.
I would say it is definitely very odd that writes are a problem. Sounds like
it might be a hardware problem. Is it possible to export the pool, remove the
ZIL and re-import it? I myself would be pretty nervous trying that, but it
wou
29 matches
Mail list logo