Hi,
So you need to reprogram your HDAC. You have four speaker possibilities,
nids 21, 22, 28 and 30. I can't tell which one is the one you want, so
you'll need to try all four until you find it. Use config in your
/boot/loader.conf.local like this:
Correction...
Your output
hi,
I'm new to BSD and I want to know, if the SAS HBA LSI 9200-8e is
supported under FreeBSD 8.2.
We installed FreeBSD on SATA disks, but I can't see any devices through
the SAS HBA, so maybe I have to load the driver first.
cu denny
___
Denny,
LSI 9200-8e is based on the SAS2008 chip and the driver for that chip (mps)
has recently been merged
from current into stable but before 8.2-RELEASE. Therefore if you're using
8.2-RELEASE iso image to
install FreeBSD on a SAS2008 system - you won't see any disks whatsoever.
Unfortunately I
Hi,
Thank you very much for your kind response.
The reprogramming I gave you was for pcm0. Your pcm1 is showing
with the HDMI digital chip pins.
Make sure that your cat /dev/sndstat is showing pcm0 as default.
(Use the sysctl hw.snd.default_unit to set it.)
Previously my sysctl
