On 17.04.11 21:54, Jeremy Chadwick wrote:
I don't recommend enabling ahci.ko after the OS has already been
installed on an adX disk, simply because I believe the combination of
GEOM+CAM+ahci may show different geometry details than GEOM+ata would.
With the disclaimer that I haven't studied
Daniel Kalchev wrote:
The only real trouble with USB stisks is that some motherboards
behave unpredictable as to boot order, but this is improving.
Why would you care about that?
When running mirrored setups with ZFS on root, I'm using GPT scheme
and every drive has boot partition, swap
On Sun, 17 Apr 2011 11:54:02 -0700
Jeremy Chadwick free...@jdc.parodius.com wrote:
I don't recommend enabling ahci.ko after the OS has already been
installed on an adX disk, simply because I believe the combination of
GEOM+CAM+ahci may show different geometry details than GEOM+ata would.
Does
One nice feature of ZFS I have discovered is with USB flash media. You
are not typically supposed to write much to that media, but using UFS on
USB sticks is awful. On contrary, when used with ZFS, the USB sticks
behave much differently, because ZFS will group writes and not do silly
Congratulation,
I just received a call from the Director of Scarlet Courier Service
Company Nigeria that the consignment box that was sent to you was
returned due to wrong address,
This consignment box contained your $5.500.000.00 united state dollars,
Your compensation fund.Therefore call the
On Saturday, April 16, 2011 7:13:16 pm Przemyslaw Frasunek wrote:
Hmm, I don't see it even trying to probe the COM1 device. I'll have to wait
until you get a verbose dmesg to investigate further I'm afraid. :(
I've got verbose dmesg now: http://www.frasunek.com/tmp/dmesg-verb.txt
Hummm.
1) Add a printf to sioprobe() in sys/dev/sio/sio.c to output an error message
when it fails to allocate a SYS_RES_IOPORT device at the very beginning.
Done. I'll need to wait until next reboot - it's a production box, so it has to
be done in night hours.
2) Capture 'acpidump -d' output and
On Monday, April 18, 2011 1:22:59 pm Przemyslaw Frasunek wrote:
1) Add a printf to sioprobe() in sys/dev/sio/sio.c to output an error
message
when it fails to allocate a SYS_RES_IOPORT device at the very beginning.
Done. I'll need to wait until next reboot - it's a production box, so it