I can`t find the place in the source where new session creates when I login
via local terminal.
There
is no call to setsid() after init forks in start_getty(session_t *sp) and no
calls to that
function in
getty and login. But when I login to the local terminal, exit and login again
I wil
Is any plans to backport ZFSv13 from CURRENT to RELENG7 branxh or not?
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Is there any plans to include NFSv4 server into FreeBSD?
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
If FreeBSD7 there was ugen.ko kernel module and I can use apcupsd with USB
devices, but in FreeBSD there is no such module, how can I use APC power supply
with usb interface (I mean usage of the apcupsd port)?
___
freebsd-stable@freebsd.org mailing list
There is FreeBSD8 system (cvsup`ed and recompiled kernel on PC-BSD system).
Noteboot asus a3l with intel PRO wireless 2915 card. Wireless 802.11a network
with WPA2 protection. I configure my system as following (rc.conf):
dhclient_flags="-c /etc/dhclient.conf"
synchronous_dhclient="YES"
ifconfig_
SO I have 7.0beta4 on my server. My HDD have such configuration:
ad4: 476940MB at ata2-master SATA300
ad6: 476940MB at ata3-master SATA300
ad10: 152627MB at ata5-master SATA150
ad12: 152627MB at ata6-master SATA150
ar0: 476928MB status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
I have got system with rl and re cards. This system functiones as gateway, rl -
internet re -
intranet. Periodically I have
ping: sendto: No buffer space available
on rl card!
on logs I have
Mar 30 22:23:02 xxx kernel: rl0: watchdog timeout
Mar 30 22:23:32 xxx last message repeated 6 ti
I have some problems with installation of beta1.5 and beta1. That problems are:
1) I try to install system via "passive ftp". So, when I use DHCP nrtwork
configuration anything works fine, but when I try to specify network
configuration
by hands (without using of DHCP) my system cant find any
So I have southbridge VT8237A and two(!) HDDs attached to SATA chanels of this
controller. I Prefer to have RAID on it.
When I install FreeBSD 6.2-RELEASE (from floppies) it`s detected only one HDD
and
write that my RAID storage DEGRADED... I think that it is a bug in the kernel.
I`m right. Ther
I want to install precompiled packages via sysinstall. I have update my
6.2-RELEASE system with cvsup to 6.3-PRELEASE. Now I want to use sysinstall to
install precompiled packages, but I get an error " Can`t find "6.3-PREREASE"
on ..." (I use ftp!). So what release name I shoul use to get packag
Hi,
Yes I have tis problem since beta1! Signal 11 appears in sysinstall when it try
to
get INDEX from ftp site. At the end of this operation appears signal 11 and
core
dumps (the same as Russell Doucette has).
So I have installed 7BETA2, without X - it allow me to avoid installation of
binary
I have two servers with Identical FreeBSD7.2 system. On both I have such config
in /etc/rc.conf:
rpcbind_enable="YES"
rpc_lockd_enable="YES"
rpc_statd_enable="YES"
nfs_client_enable="YES"
nfs_server_enable="YES"
nfs_server_flags="-u -t -n 5 -h 192.168.x.y"
mountd_flags="-r"
where "x" identical for
> Perhaps there's no /etc/exports file? While exporting shared zfs file
> systems doesn't require this, it looks like /etc/rc.d/mountd requires
> the file to be present.
>
>
> On May 19, 2009, at 2:33 PM, Zaphod Beeblebrox wrote:
>
> > 2009/5/18 Мих
13 matches
Mail list logo