I use:
BOOT_COMCONSOLE_SPEED= 115200
In my make.conf and that does the trick for me.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Michael W. Lucas
> Sent: 08 June 2005 15:03
> To: [EMAIL PROTECTED]
> Subject: CONSPEED=19200 broken/changed
BIOS, set to optimal, and
running
4-STABLE. Only time I had problems was when I left the squidgy pink thermal
paste
on the heatsink that made it overheat. Cleaning it off resulted in a stable
system.
Oh and as to load, it ran 10 consecutive buildworlds with -j4 as a test with
no
problems.
Lawrence
I build releases nightly, and have been getting
(snip)
+ shift
+ FSLABEL=minimum3
+ shift
+ [ 4320 -eq 0 -a minimum3 = auto ]
+ rm -f /R/stage/mfsroot/mfsroot
+ dd of=/R/stage/mfsroot/mfsroot if=/dev/zero count=4320 bs=1k uname -r
+ [ -f /R/stage/trees/base/boot/boot ] BOOT=-B -b
+ /R/stage/tre
I've got an Asus P5E3WSPro with 8 SATA ports and 8 disks attached. 6 disks
are on
one controller (and work perfectly) and 2 are on a second Marvell
controller.
FreeBSD sees the controller, but not the disks. If I move a working disk to
the
Marvell controller I can boot off it up to the stage of mou
> -Original Message-
> From: Yuri Pankov [mailto:[EMAIL PROTECTED]
> Sent: 05 December 2007 10:37
> To: Lawrence Farr
> Cc: freebsd-stable@freebsd.org
> Subject: Re: Anyone else seeing this on a make release of 7?
>
> On 12/5/2007 12:55 PM, Lawrence Farr wrote:
&
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of Claus Guttesen
> Sent: 05 December 2007 10:47
> To: Lawrence Farr
> Cc: freebsd-stable@freebsd.org
> Subject: Re: Anyone else seeing this on a make release of 7
cc -Os -pipe -Wsystem-headers -Werror -Wall -Wno-format-y2k -W
-Wno-unused-parameter -Wstrict-prototypes -Wmissing-prototypes
-Wpointer-arith -W
return-type -Wcast-qual -Wwrite-strings -Wswitch -Wshadow -Wcast-align
-Wunused-parameter -Wchar-subscripts -Winline -Wnested-externs -Wredundan
t-decls -
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of John Baldwin
> Sent: 14 March 2008 19:46
> To: freebsd-stable@freebsd.org
> Cc: Greg Rivers
> Subject: Re: bin/121684: dump frequently hangs
>
> On Friday 14 March 2008 12:53:22 am Greg R
ll partition on the start,
which boots fine, but screws up the disk sizing as the geometry
is wrong I guess? tried diskprep, but that gets the gemometry
wrong as well. Is the only option to use gpt and restore to
it from another boot device and hope that the bios can boot it?
Lawrence Farr
EPC
with partitions over 2Tb? I've never gone over
2Tb before, so havent come across any issues like this.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Lawrence Farr
> Sent: 10 November 2006 11:39
> To: [EMAIL PROTECTED]
> Subj
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Clayton Milos
> Sent: 17 November 2006 11:10
> To: Lawrence Farr; freebsd-stable@freebsd.org
> Subject: Re: Areca Weirdness
>
>
> - Original Message -----
>
0830
> > > Bounds: 0
> > > Dump Status: good
> > >
> > > Am I expecting too much with partitions over 2Tb? I've
> > never gone over
> > > 2Tb before, so havent come across any issues like this.
> > >
> > >> -Original Messa
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Kris Kennaway
> Sent: 21 November 2006 21:07
> To: Lawrence Farr
> Cc: freebsd-stable@freebsd.org; 'Tom Samplonius'; 'Kris Kennaway'
> Subject: Re: ufs_d
I updated my backup boxes to the latest and greatest ZFS code,
and started getting the following panic on them all (3 machines):
panic: zfs_fuid_create
cpuid = 1
Uptime: 1h28m48s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
A quick goog
> -Original Message-
> From: owner-freebsd-sta...@freebsd.org [mailto:owner-freebsd-
> sta...@freebsd.org] On Behalf Of Andriy Gapon
> Sent: 28 May 2009 18:11
> To: Lawrence Farr
> Cc: freebsd-stable@freebsd.org
> Subject: Re: ZFS panic in zfs_fuid_create
>
I've stuck a Promise TX4300 controller in to replace
the marvell onboard SATA that I can't boot off on a
Supermicro server. If I set 2 discs up as Raid 0
or Raid 1 it's fine, But 4 discs as Raid 0+1 is detected,
installs without any problems, but hangs at the boot
loader with elf32_loadimage: rea
>
> > I've stuck a Promise TX4300 controller in to replace
> > the marvell onboard SATA that I can't boot off on a
> > Supermicro server. If I set 2 discs up as Raid 0
> > or Raid 1 it's fine, But 4 discs as Raid 0+1 is detected,
> > installs without any problems, but hangs at the boot
> > loader
I've been seeing this for a week or so, and have deleted
/usr/obj and run make
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I've been seeing the following for a week or so, and have
deleted /usr/obj , re-cvsupped and run
cd /usr/src && make cleandir && make cleandir
make.conf is empty. Anyone got any ideas?
===> kerberos5/tools/make-roken (all)
===> kerberos5/tools/asn1_compile (all)
cd /usr/src/kerberos5/tools/as
> -Original Message-
> From: Brooks Davis [mailto:[EMAIL PROTECTED]
> My telepathy powers aren't working. What's the error? :)
See the second message I sent where I didn't accidentally hit
ctrl-s instead of ctrl-v when pasting the error in. Doh.
Here it is again:
I've been seeing the
Ive had odd errors when using full stops and hyphens in kernel names,
that
have been fixed by changing the filename.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Odhiambo
Washington
Sent: 08 August 2001 12:57
To: FBSD-STABLE
Subject: Kernel Compile
>weeks. The reason why the machine
>gets so often rebooted is because we do very often cvsupdates,
>almost every day.
Why do you do this to a production machine, and then get surprised when
it doesn't work???
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in
More importantly, do they work? They used to be next to useless.
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]] On Behalf Of Len Conrad
>Sent: 04 October 2001 12:48
>To: [EMAIL PROTECTED]
>Subject: Re: end of 3ware IDE
>
>
>
>>>www.highpoint-tech.com
>>
>>How do
As in powers off? How bigs the PSU?
Lawrence Farr
EPC Direct Limited
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Morsal Roudbay
> Sent: 29 November 2001 10:45
> To: Kristian K. Nielsen
> Cc: [EMAIL PROTECTED]
> Su
Will this patch sort out problems with audio extraction on my
A7V-E or A7M266? I get read timeouts in FreeBSD, but it's happy
in Win2K. If it's worth a try, can someone mail me with it?
Cheers!
Lawrence Farr
EPC Direct Limited
> -Original Message-
> From: [EMAIL PROTE
And there's Dan O'Connor's excellent info on
http://www.mostgraveconcern.com/freebsd/
See the "Moving to a Larger Hard Drive" section.
Lawrence Farr
EPC Direct Limited
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] O
Yep. They work fine:
wi0: port 0xdf00-0xdf3f,0xd880-0xd8ff mem
0xdfffe000-0xdfffefff irq 10 at device 9.0 on pci0
wi0: 802.11 address: 00:30:ab:09:5e:ed
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B
wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03
Lawrence Farr
EPC Direct
27 matches
Mail list logo
