1.2.3.4.5666 5.6.7.8.33877 TIME_WAIT
So naturally the server never manages to get on top of things due to not
discarding those on time.
Any other ideas and suggestions?
Regards,
Rumen Telbizov
On Tue, Mar 3, 2015 at 5:41 PM, Michael Ross g...@ross.cx wrote:
On Wed, 04 Mar 2015 01:36:18
traffic. I will keep it like that in case further investigation is
required. Please do let me know if there's anything else you'd like to know
from the state of the machine or something I could try.
​Regards,
--
Rumen Telbizov
Unix Systems Administrator http://telbizov.com
,
--
Rumen Telbizov
Unix Systems Administrator http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
kind of tuning would you recommend that I try?
Thanks,
Rumen Telbizov
On Thu, Oct 3, 2013 at 1:35 PM, Jack Vogel jfvo...@gmail.com wrote:
sysctl dev.ix.0 etc...
Jack
On Thu, Oct 3, 2013 at 12:35 PM, Rumen Telbizov telbi...@gmail.comwrote:
Hello everyone,
I am trying to tweak some
be another knob to turn -
feel free to suggest it.
Thanks,
Rumen Telbizov
On Thu, Oct 3, 2013 at 3:15 PM, Jack Vogel jfvo...@gmail.com wrote:
Make sure you are in slots with enough lanes/bandwidth, the driver should
complain when loaded
if you aren't though. Make sure you aren't getting interrupts
appreciated.
Cheers,
Rumen Telbizov
On Thu, Oct 3, 2013 at 3:38 PM, Jack Vogel jfvo...@gmail.com wrote:
Set the storm threshold to 0, that way you disable the check and don't
have to wonder
if its a problem :)
Given everything you've told me I'd suspect the switch... easy enough to
test, remove
yourself or do you think it needs to
reworked? Also any plans of incorporating this in -STABLE ?
Again, I'd like to thank everyone who helped here and especially Oleg,
Dmitry and Jack. Thanks guys!
Cheers,
Rumen Telbizov
On Wed, Sep 25, 2013 at 2:10 PM, Dmitry Morozovsky ma...@rinet.ru wrote
Thanks for the patch Oleg.
I'll give it a try but I would also like to hear back from Jack.
Oleg, can you confirm that you're experiencing the exact same
problem/behavior? What kind of switch is connected on the other end?
Thanks,
Rumen Telbizov
On Wed, Sep 25, 2013 at 9:40 AM, Oleg Bulyzhin o
and repeat the tests
see what happens.
2. If the previous one fails - I'll try the patch that Oleg sent. Thanks a
lot for providing that patch.
I'll update this list with more findings.
Thank you,
Rumen Telbizov
On Wed, Sep 25, 2013 at 10:01 AM, Jack Vogel jfvo...@gmail.com wrote:
Rumen
Jack,
Can you reproduce this problem yourself? Does it make sense to experience
this behavior?
Thanks,
Rumen Telbizov
On Wed, Sep 25, 2013 at 11:23 AM, Jack Vogel jfvo...@gmail.com wrote:
Thanks for the investigation, I guess what I'm wondering the most right
now is if the patch from
Oleg
and
endorse/incorporate
into future FreeBSD releases. From the comments I am not sure if Jack
really approves on
it or there's a better way of fixing things.
Thank you,
Rumen Telbizov
On Wed, Sep 25, 2013 at 11:32 AM, Oleg Bulyzhin o...@freebsd.org wrote:
On Wed, Sep 25, 2013 at 11:14:38AM -0700
-RC4 in this
regards?
Thank you in advance,
--
Rumen Telbizov
Unix Systems Administrator http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd
, send any mail to freebsd-stable-unsubscr...@freebsd.org
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable
. Having a better understanding on *exactly* what
is causing the problem is what I want
to have first and foremost. Hopefully this script will help me.
Thanks to both of you guys.
Cheers,
Rumen Telbizov
On Tue, Apr 10, 2012 at 4:34 AM, Andriy Gapon a...@freebsd.org wrote:
on 09/04/2012 21:50
# dd if=/boot/zfsboot of=/dev/da0 skip=1 seek=1024
# reboot
At this point I am contemplating how to evacuate all the data from there or
better yet put some USB flash to boot from.
I could provide further details/execute commands if needed. Any help would
be appreciated.
Thank you,
--
Rumen
connected to 1 backplane.
Again both those are fixed in 9.0.
I hope this helps.
Cheers,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail
backplanes!
Cheers,
Rumen Telbizov
On Wed, Apr 27, 2011 at 8:36 AM, Alexander Motin m...@freebsd.org wrote:
On 27.04.2011 16:39, Denny Schierz wrote:
Am Mittwoch, den 27.04.2011, 05:57 -0700 schrieb Jeremy Chadwick:
camcontrol reset 0
0:22:0 is available, 0:46:0 not:
root@iscsihead-m
address
change might be exhausting the cpu much faster. I'd be interested to see how
this
affects catalyst - let me know.
Good luck,
Rumen Telbizov
On Fri, Apr 8, 2011 at 3:29 AM, Denny Schierz linuxm...@4lin.net wrote:
hi,
I want to bound two e1000 (1Gb/s) channels and use at the moment LCAP
idea.
Very interested of what others have done to implement a redundant/failover
ZFS solution.
Cheers,
Rumen Telbizov
On Tue, Mar 29, 2011 at 4:17 AM, Denny Schierz linuxm...@4lin.net wrote:
hi,
my two nodes are running fine with 8.2-stable and the LSI 9200-8e and
now, I want to build
is only maybe LACP, but it doesn't really cut it
when
it comes to transfers between two nodes only due to the hashing that LACP
uses. Or maybe 10GbE anyone?
Cheers,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http
were organized in raidz2 = 6 x
8disks.
Anyway ... something to consider in the cases when you don't have or you
don't
want to have a dedicated bunch of disks for the operating system.
Cheers
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable
-378d1d7d308d71637a3466a4f98f845aaeaa116a
if you're planning on using ZFS root.
Improvisation in the above process is strongly suggested ;)
I hope this helps a bit.
Cheers,
Rumen Telbizov
On Sun, Mar 20, 2011 at 4:02 AM, Denny Schierz de...@denny-schierz.dewrote:
hi,
I'm new to BSD and I want to know, if the SAS HBA LSI 9200
term. :/
- .Dustin
On Mar 10, 2011, at 10:09 PM, Rumen Telbizov wrote:
Hello Dustin,
I've been testing this SAS2008 LSI chip (on a LSI 9211-8i) for the last
month or so and I can say
that it makes a pretty good HBA but there are indeed a few caveats you
might need to be aware
but
prints stats every second.
On a related note I also experienced very slow read speeds (200MB/s) with
the above mentioned configuration and after enabling
prefetch (I used to set it to disabled as per Jeremy Chadwick's advise)
everything went back to normal - so keep it in mind.
Cheers,
Rumen Telbizov
channel.
Anyway this was just my humble attempt to encourage the MFC of this driver.
I think the card is
pretty good. I'd like to hear other people's opinion on this HBA though.
Regards,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable
.
Is this still the case? Do you think we'll have this driver in 8.2?
Thank you,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable
John:
Thanks for the information.
Do you think there's any chance for this to happen sonner than 8.3 release?
Sometime during 8.2-STABLE lifespan?
Cheers,
Rumen Telbizov
On Tue, Jan 25, 2011 at 10:17 AM, John Baldwin j...@freebsd.org wrote:
On Tuesday, January 25, 2011 11:26:12 am Rumen
...
Anyway, thank you once again. Highly appreciated. I hope this is a helpful
piece of
discussion for other people having similar problems.
Cheers,
Rumen Telbizov
On Tue, Nov 16, 2010 at 8:55 PM, jhell jh...@dataix.net wrote:
On 11/16/2010 16:15, Rumen Telbizov wrote:
It seems like
if you have any ideas?
All opinions are appreciated!
Thank you,
Rumen Telbizov
On Sat, Nov 6, 2010 at 8:59 PM, jhell jh...@dataix.net wrote:
On 10/31/2010 15:53, Rumen Telbizov wrote:
Hi Artem, everyone,
Here's the latest update on my case.
I did upgrade the system to the latest stable
that if there's a way to edit the cache file and change the
devices that might do the trick.
Thanks for all the help,
Rumen Telbizov
On Fri, Oct 29, 2010 at 5:01 PM, Artem Belevich fbsdl...@src.cx wrote:
On Fri, Oct 29, 2010 at 4:42 PM, Rumen Telbizov telbi...@gmail.com
wrote:
FreeBSD 8.1
you very much,
Rumen Telbizov
On Fri, Oct 29, 2010 at 12:26 AM, Artem Belevich fbsdl...@src.cx wrote:
On Thu, Oct 28, 2010 at 10:51 PM, Rumen Telbizov telbi...@gmail.com
wrote:
Hi Artem, everyone,
Thanks for your quick response. Unfortunately I already did try this
approach.
Applying
configuration, via the zpool.cache file or not, and substitute
mfid with gpt/disk?!
Is there a way to do this?
Thanks,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
if there's a way to fix it over OpenSolaris LiveCD. Somehow load
the gpt labeled partitions and save
the cache file.
Regards,
--
Rumen Telbizov
http://telbizov.com
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Thanks Artem,
I'll upgrade to latest stable and zfs 15 tomorrow or Sunday and I'll see if
that makes
it any better. If not I'll also try the chmod operation below.
Thanks for the suggestions. I'll report back here.
Regards,
Rumen Telbizov
On Fri, Oct 29, 2010 at 5:01 PM, Artem Belevich fbsdl
may need.
Thank you,
Rumen Telbizov
On Wed, Oct 27, 2010 at 6:05 PM, Rumen Telbizov telbi...@gmail.com wrote:
Thanks Artem,
I am mainly concerned about fixing this immediate problem first and then if
I
can provide more information for the developers so that they look into this
problem
I'd
would be appreciated.
Thank you,
Rumen Telbizov
On Thu, Oct 28, 2010 at 9:46 PM, Artem Belevich fbsdl...@src.cx wrote:
but only those 3 devices in /dev/gpt and absolutely nothing in
/dev/gptid/
So is there a way to bring all the gpt labeled partitions back into the
pool
instead of using
No ideas whatsoever?
On Tue, Oct 26, 2010 at 1:04 PM, Rumen Telbizov telbi...@gmail.com wrote:
Hello everyone,
After a few days of struggle with my degraded zpool on a backup server I
decided to ask for
help here or at least get some clues as to what might be wrong with it.
Here's
that is newer than the one FreeBSD supports.
Opensolaris may be able to fix the array. Once it's done, export it,
boot back to FreeBSD and re-import it.
--Artem
On Wed, Oct 27, 2010 at 4:22 PM, Rumen Telbizov telbi...@gmail.com
wrote:
No ideas whatsoever?
On Tue, Oct 26, 2010 at 1:04 PM
Disks: 36 x 2T Western Digital RE4
Any help would be appreciated. Let me know what additional information I
should provide.
Thank you in advance,
--
Rumen Telbizov
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman
Thank you everyone for your comments!
On Sun, Oct 3, 2010 at 11:19 AM, Ivan Voras ivo...@freebsd.org wrote:
On 10/02/10 22:18, Rumen Telbizov wrote:
pool: tank
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
percona binary without any luck.
Let me know what additional information would be useful and I'll provide it
here.
Thank you in advance for your comments and suggestions.
Cheers,
Rumen Telbizov
___
freebsd-stable@freebsd.org mailing list
http
.
Let me know what you think. I might be missing something obvious.
Thank you,
Rumen Telbizov
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to freebsd-stable-unsubscr
(and 4.10-PRERELEASE).
Good Luck
Rumen Telbizov
_F
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED
On Sat, May 15, 2004 at 05:22:31AM -0700, Dan Strick wrote:
On Sat, 15 May 2004 14:01:45 +0300, Rumen Telbizov wrote:
I am running 2 server with serial ata controllers
(HighPoint and a builtin one) and so far I had NO problems
at all! HighPoint seem to be very stable (after a bios update
is better!
A simple ubench (spawning 2 processes) gives better results in 0 mode!
Thank you in advance!
Rumen Telbizov
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL
are welcome.
Thank you in advance.
Rumen Telbizov
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]
46 matches
Mail list logo
