way on the bridge
implementations that has an actual logical bridge interface I've come
across. It is, as far as i understand, to address the problems you
described.
--
Sten Daniel Sørsdal
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
similar messages on other hosts in my network, it seems
> that the desktop is always sending traffic to the rest of my network
> via rl0. This leaves two questions:
>
> Firstly, why is laptop1 seeing packets coming from both interfaces on
> the desktop? I had ex
setting the mode to 10mbit/half duplex (and verify on switch) to see
if the packet loss goes away. If it does then it's the cable, if it
doesn't then it's still possible but less likely to be the cable.
Please let us know what you find out.
--
Sten Daniel Sørsdal
pport XR mode.
>
> Sam
>
Are there any plans to support this?
What about fastframes/bursting? 10Mhz, 5Mhz channels?
WDS? Virtual AP? Is there any place where i can read about this?
Apologies if any of these are already in the works.
--
Sten Daniel Sørsdal
__
g this yet. (nearly two years)
>
> i wonder what else i could check or what other tests i could run.
>
> any ideas pls ?
>
> martin
>
> ps: i'll try to locate the FAQ mentioned above.
>
Does the error ocurr at different times in
up to 400mbits/sec.
Are you by any chance using PCI NIC's? PCI Bus is limited to somewhere around 1
Gbit/s.
So if you consider;
Theoretical maxium = ( 1Gbps - pci_overhead )
--
Sten Daniel Sørsdal
___
freebsd-stable@freebsd.org mailing list
http://l
a customer.
--
Sten Daniel Sørsdal
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ures - but only a handful of the
features work.
Just my 2 nkr
---
Med vennlig hilsen / Best regards
Sten Daniel Sørsdal
Wireless Manager
WAN Norway AS
---
-Original Message-
From: Wright, Michaelx L [mailto:[EMAIL PROTECTED]]
Sent: 3. januar 2003 19:28
To: Evre
I believe I read somewhere that 802.11b standard supports larger MTUs than 1500.
I know basic ethernet MTU is 1500 but even my crappy old Nortel 8603 routing switch
supports up to MTU 1960
Any corrections appreciated
// Sten
-Original Message-
From: David Magda [mailto:[EMAIL PROTECTED