On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
[...]
re0@pci0:4:0:0: class=0x02 card=0x512c1462 chip=0x816810ec rev=0x02
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device
2013/3/18 YongHyeon PYUN pyu...@gmail.com:
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
[...]
re0@pci0:4:0:0: class=0x02 card=0x512c1462 chip=0x816810ec rev=0x02
hdr=0x00
vendor =
Hi--
On Mar 16, 2013, at 2:08 AM, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
I'm running:
FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #0 r248347:
Sat Mar 16 03:20:58 MSK 2013
2013/3/18 Chuck Swiger cswi...@mac.com:
Hi--
On Mar 18, 2013, at 11:16 AM, Jeremy Chadwick wrote:
You've got an Intel P45 northbridge controller which supports dual-channel
mode, but that only works for DIMMs of the same size. You might be able to
get 6GB if you place the DIMMs in slots 1
On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
2013/3/18 YongHyeon PYUN pyu...@gmail.com:
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I don't get or can't handle.
[...]
re0@pci0:4:0:0:
On Tue, Mar 19, 2013 at 01:56:29PM +0900, YongHyeon PYUN wrote:
On Mon, Mar 18, 2013 at 05:19:11PM +0400, Michael BlackHeart wrote:
2013/3/18 YongHyeon PYUN pyu...@gmail.com:
On Sat, Mar 16, 2013 at 01:08:06PM +0400, Michael BlackHeart wrote:
Hello there. I've got a couple of things I
Hello there. I've got a couple of things I don't get or can't handle.
I'm running:
FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #0 r248347:
Sat Mar 16 03:20:58 MSK 2013
root@diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64
1st of all, on dmesg there's something strange.
Not if you're using any third party modules.
What does 'kldstat' tell you?
kernel + acpi.ko + linux.ko, as I already mentioned in another email.
Petr
___
freebsd-stable@freebsd.org mailing list
Hi,
since I've upgraded from 6.0-BETA4 to 6.0-RELEASE (using binary
upgrade on contrary to 6.0-BETA4, which was binary from BETA2, which
was clean install ;-) ), I'm experiencing multiple problems which were
not present on BETA4:
1) when rebooting, the system freezes on message
Shutting down
On Mon, Nov 14, 2005 at 05:39:52AM +0100, Petr Holub wrote:
Hi,
since I've upgraded from 6.0-BETA4 to 6.0-RELEASE (using binary
upgrade on contrary to 6.0-BETA4, which was binary from BETA2, which
was clean install ;-) ), I'm experiencing multiple problems which were
not present on BETA4:
Did you remember to rebuild any modules you are using when you
upgraded?
cd /sys/i386/conf/
config KLOBOUCEK
cd ../compile/KLOBOUCEK
make cleandepend; make depend make make install
as usual. I assume that's sufficient.
The only thing I'm not sure of now is the linux emulation...
Thanks,
2) I get rather regular freezes in X when running GL with drm acceleration;
I've rebuilt both xorg-server-snap and dri-devel from sources
but it freezes still after couple of seconds of glxgears (while
it worked fine on BETA4 achieving slightly above 2100 fps)
Did you remember
On Mon, Nov 14, 2005 at 06:02:35AM +0100, Petr Holub wrote:
Did you remember to rebuild any modules you are using when you
upgraded?
cd /sys/i386/conf/
config KLOBOUCEK
cd ../compile/KLOBOUCEK
make cleandepend; make depend make make install
as usual. I assume that's sufficient.
Not
13 matches
Mail list logo