den by
environment.
intel_do_flush_locked failed: Input/output error
>From searching the Internet, I couldn't find any recent FreeBSD users
complaining about similar issues. Got me won
On Mon, May 26, 2008 at 1:21 AM, Carlos A. M. dos Santos
[EMAIL PROTECTED] wrote:
On Mon, May 19, 2008 at 9:27 AM, Carlos A. M. dos Santos
[EMAIL PROTECTED] wrote:
On Sat, May 17, 2008 at 4:28 PM, Volker [EMAIL PROTECTED] wrote:
Carlos,
IMHO it's better to explicitly check for ioctl
Hello,
I get burncd: ioctl(CDIOCEJECT): Input/output error each time I
attempt to blank a CDRW with
burncd -f /dev/acd0 blank eject
I noticed that this does not happen when I write a data cd with
burncd -f /dev/acd0 data cd-image.iso fixate eject
I have seen the same bahavior on 4
-BETA4-i386-disc1.iso fixate
Password:
next writeable LBA 0
writing from file 6.1-BETA4-i386-disc1.iso size 454082 KB
written this track 454082 KB (100%) total 454082 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
localhost(6.1-P)[23
3. Re: help ith burncd (Input/output error, 6.1-RC, plextor
PX-740a) (George Hartzell)
5. Re: help ith burncd (Input/output error, 6.1-RC, plextor
PX-740a) (George Hartzell)
--
Message: 3
Date: Wed, 12 Apr 2006 09:13:03 -0700
From: George
Hartzell wrote:
I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW
drive attached to an Asus A8V-MX motherboard.
When I try to use burncd to burn a cd, it writes all of the data, says
fixating CD, please wait.. and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
On Tue, Apr 11, 2006 at 06:49:02PM -0700, George Hartzell wrote:
When I try to use burncd to burn a cd, it writes all of the data, says
fixating CD, please wait.. and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
Oddly enough, the CD seems to be usable.
I can
Igor Robul writes:
On Tue, Apr 11, 2006 at 06:49:02PM -0700, George Hartzell wrote:
When I try to use burncd to burn a cd, it writes all of the data, says
fixating CD, please wait.. and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
Oddly enough, the CD seems
Vladimir Botka writes:
Hello,
for me Plextor-750 works well with cdrecord and SCSI emulation (ATAPI/CAM
module)
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM
Plextor is a good choice.
It works for me with cdrecord too.
I'm just trying to
On Wed, Apr 12, 2006 at 09:13:03AM -0700, George Hartzell wrote:
Igor Robul writes:
On same CD-R disc? :-)
No, on a fresh disk... ;)
So, I think you got my point: there maybe problem with disk.
I guess my question is: Is this one of those known things that
everyone just ignores, or do I
I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW
drive attached to an Asus A8V-MX motherboard.
When I try to use burncd to burn a cd, it writes all of the data, says
fixating CD, please wait.. and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
Oddly enough
of the data, says
fixating CD, please wait.. and then reports
burncd: ioctl(CDRIOCFIXATE): Input/output error
Oddly enough, the CD seems to be usable.
I can successfully burn the same file if I use cdrecord.
The system was cvsup-ed a couple of days ago, and the kernel config is
the example
(CDRIOCFIXATE): Input/output error
I reported it[1] awhile ago. It stems from how FreeBSD checks the
status of the drive and/or how the drive reports back. It used to work
with FreeBSD 4, but the manner of how the drive is checked changed with
FreeBSD 5+.
Seán
1. http://www.freebsd.org/cgi/query
] sudo burncd -s max -f /dev/acd0 data
6.1-BETA4-i386-disc1.iso fixate
next writeable LBA 0
writing from file 6.1-BETA4-i386-disc1.iso size 454082 KB
written this track 454082 KB (100%) total 454082 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
localhost(6.1-P)[16
Password:
next writeable LBA 0
writing from file 6.1-BETA4-i386-disc1.iso size 454082 KB
written this track 454082 KB (100%) total 454082 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
localhost(6.1-P)[23]
There was a fair amount of time -- around 15 - 20
to 6-STABLE was a bit precipitous (though I had been
tracking 6-STABLE, it was on a slice I didn't really use all that
much on my laptop).
Hi, David. I was also seeing this burncd: ioctl(CDRIOCFIXATE):
Input/output error whine from burncd with the NEC ND-3520A DVD R/RW
drive I used to have
On Wed, Mar 15, 2006 at 04:27:13PM -0500, Scott Robbins wrote:
...
In my case, the CD burns without problem however, I get that error.
Googling found me a few other people with a similar issue. Have you
tried the CD afterwords to see if it works anyway?
Well, as I showed in my original
Hello!
On Wed, 15 Mar 2006, Scott Robbins wrote:
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
localhost(6.1-P)[23]
There was a fair amount of time -- around 15 - 20 seconds -- between the
fixating CD, please wait.. message and the whine, during which
writeable LBA 0
addr = 0 size = 244523008 blocks = 119396
writing from file xxx.iso size 238792 KB
written this track 238792 KB (100%) total 238792 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
Exit 74
Andreas ///
--
Andreas Klemm - Powered by FreeBSD 5.4
Need
this track 238792 KB (100%) total 238792 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
Exit 74
Have you tried cdrecord? You pretty much only need to add ATAPICAM
to the kernel, although If you don't already have SCSI support on
the machine, you'll need to add that (cd
224678 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
Exitcode 74
*** trying to mount cdrom
root# mount -r -t cd9660 /dev/acd1 /cdrom
cd9660: /dev/acd1: Input/output error
Exit 1
*** ejecting cdrom manually and retrying mount operation
root# mount -r -t cd9660 /dev
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sat, Sep 17, 2005 at 03:03:44PM +0200, Andreas Klemm wrote:
2 problems with FreeBSD 5.4 stable:
- burncd has strange exit status when reading ISO file from stdin
according to manual page possible:
[...]
gunzip -c file.iso.gz |
Andreas Klemm wrote:
[ ... ]
- burncd leaves cdrom in a way that CD cannot be mounted
after burning, one has to open and re-close CD tray manually
before one is able to mount the frshly burned CD.
This is an issue with the drive firmware more than anything to do with
software. Most
On Sat, Sep 17, 2005 at 12:42:39PM -0400, Chuck Swiger wrote:
Andreas Klemm wrote:
[ ... ]
- burncd leaves cdrom in a way that CD cannot be mounted
after burning, one has to open and re-close CD tray manually
before one is able to mount the frshly burned CD.
This is an issue with
On Fri, Jun 17, 2005 at 04:34:38PM +0400, wrote:
Hi!
Such problem!
# uname -rs
FreeBSD 5.4-RELEASE-p1
# mount -t msdosfs /dev/fd0 /mnt/flp
msdosfs: /dev/fd0: Input/output error
# fdformat -f 1440 /dev/fd0
Format 1440K floppy `/dev/fd0'? (y/n): y
Processing fdformat: ioctl
Hi!
Such problem!
# uname -rs
FreeBSD 5.4-RELEASE-p1
# mount -t msdosfs /dev/fd0 /mnt/flp
msdosfs: /dev/fd0: Input/output error
# fdformat -f 1440 /dev/fd0
Format 1440K floppy `/dev/fd0'? (y/n): y
Processing fdformat: ioctl(FD_FORM): Input/output error
# fdcontrol -v /dev/fd0
/dev/fd0
akt.iso size 554522 KB
written this track 554522 KB (100%) total 554522 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
Also I can't blank cd.. burncd blank command just hang all the time..
dmesg -a | grep acd0
acd0: CDRW ATAPI CD-RW CW4801/130C at ata0-master UDMA33
addr = 0 size = 567830528 blocks = 277261
writing from file akt.iso size 554522 KB
written this track 554522 KB (100%) total 554522 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCFIXATE): Input/output error
Also I can't blank cd.. burncd blank command just hang all the time..
Perhaps
Richard Mahoney wrote:
I am having trouble burning CD-R's with the following:
[ ... ]
Do any readers have any idea what the issue may be. This problem has
been occuring on and off for a while but appears to be becoming worse.
What does atacontrol mode 1 show? Is your burner running in PIO, or in
table size(bytes): 502
Max brk space used c3664
84864 extents written (165 Mb)
next writeable LBA 0
writing from file /usr/home/share/temp/rbm49/scan.iso size 169728 KB
written this track 129184 KB (76%) total 129184 KB
only wrote -1 of 32768 bytes err=5
burncd: ioctl(CDRIOCFLUSH): Input/output error
Hi! Yesterday i did a cvsup (stable) followed by a make world and kernel,
after i rebooted my system ipnat no longer worked:
[root@idyll]# ipnat
ioctl(SIOCGNATS): Input/output error
[root@idyll]# strace ipnat
execve(/sbin/ipnat, [ipnat], [/* 30 vars */]) = 0
__sysctl([kern.hostname], 2
Peter C. Verhage wrote:
Fortunately it looks like a harddisk problem. When I got home today (I
wasn't at home the past few days but I monitored the box from another place,
and called home if someone wanted to reboot the computer :P), I quickly
checked everything and rebooted (again) and
Another error message appeared (a lot of times!):
ad0s1f: hard error reading fsbn 1511519 of 131088-131089 (ad0s1 bn 1511519;
cn 94 tn 22 sn 23) status=59 error=04
ad0s1f: hard error reading fsbn 1511519 of 131088-131089 (ad0s1 bn 1511519;
cn 94 tn 22 sn 23) status=59 error=04
ad0s1f: hard
/output error
acd0: READ_BIG - HARDWARE ERROR asc=08 ascq=03 error=00
while trying to mount every cd-rom. It forked fine with 4.2-BETA, but
had some problems with 4.1.1-STABLE.
Best regards,
Cristian Bradiceanu
begin:vcard
n:Bradiceanu;Cristian
tel;fax:+40-56-201278
tel;work:+40-56-201278
x
34 matches
Mail list logo