On 2/3/2016 9:20 AM, krad wrote:
>
> If zfs you probably want the reflash the card the the relevant HBA firmware
> rather the the raid firmware. This will expose the disks nativly which is
> best for zfs.
The version of card I have allows you to expose the individual disks as
JBODs out of the box
would check
as it might save you a whole load of pain going in a direction you don't
need to.
On 2 February 2016 at 17:06, Zara Kanaeva wrote:
> Dear list,
>
> I have one Fujitsu server with LSI SAS 3108 RAID Controller. These LSI SAS
> 3108 RAID Controller is supported by th
with LSI SAS 3108 RAID Controller. These
LSI SAS 3108 RAID Controller is supported by the mpr driver
(https://www.freebsd.org/relnotes/CURRENT/hardware/support.html).
If I try to install the FreeBSD-stable 10.0 or FreeBSD-current 11.0
on this server I can make partitions, but I can not write
On 2/2/2016 12:06 PM, Zara Kanaeva wrote:
> Dear list,
>
> I have one Fujitsu server with LSI SAS 3108 RAID Controller. These LSI
> SAS 3108 RAID Controller is supported by the mpr driver
Try and attach the mrsas driver to the card. I had a similar problem
with an onboard vari
Try adding this to /boot/loader.conf:
hw.mfi.mrsas_enable="1"
Regards
Steve
On 02/02/2016 17:06, Zara Kanaeva wrote:
Dear list,
I have one Fujitsu server with LSI SAS 3108 RAID Controller. These LSI
SAS 3108 RAID Controller is supported by the mpr driver
(https://www.f
Dear list,
I have one Fujitsu server with LSI SAS 3108 RAID Controller. These LSI
SAS 3108 RAID Controller is supported by the mpr driver
(https://www.freebsd.org/relnotes/CURRENT/hardware/support.html).
If I try to install the FreeBSD-stable 10.0 or FreeBSD-current 11.0 on
this server I
