Alban Hertroys haram...@gmail.com wrote:
The new system has a Gigabyte GA970A-UD3 board with just a serial header
on the board. I bought a serial connector backplate in an electronics
store and connected it to the board. Could the pinout be different or
something?
Yes. There are two
On 06/06/2013, at 22:51, Christian Weisgerber na...@mips.inka.de wrote:
Alban Hertroys haram...@gmail.com wrote:
The new system has a Gigabyte GA970A-UD3 board with just a serial header
on the board. I bought a serial connector backplate in an electronics
store and connected it to the
On Jun 5, 2013, at 2:59, Jeremy Chadwick j...@koitsu.org wrote:
On Tue, Jun 04, 2013 at 11:32:48PM +0200, Alban Hertroys wrote:
I can't seem to get my serial terminal to work with my new system.
I had a serial terminal connected to my old system that worked great
and copied /boot.config,
On Wed, Jun 05, 2013 at 09:29:56PM +0200, Alban Hertroys wrote:
{sniping stuff that is pending or has been acknowledged}
On Jun 5, 2013, at 2:59, Jeremy Chadwick j...@koitsu.org wrote:
Serial port speed settings in a BIOS pertain to BIOS-level console
redirection -- that redirection is lost
On 06/06/2013, at 4:59, Alban Hertroys haram...@gmail.com wrote:
It is very possible. You should have asked Gigabyte what exact product
(specifically part number) to purchase that provided a
header-to-backplane DB9 port, or if they could send you one (many will
for free). Always use what
I can't seem to get my serial terminal to work with my new system.
I had a serial terminal connected to my old system that worked great and copied
/boot.config, /boot/loader.conf and /etc/ttys settings over from it.
The new system has a Gigabyte GA970A-UD3 board with just a serial header on the
On Jun 4, 2013, at 23:32, Alban Hertroys haram...@gmail.com wrote:
I can't seem to get my serial terminal to work with my new system.
...
cat /boot.config
-D -S19200
cat /boot/loader.conf
boot_multicons=YES
boot_serial=YES
comconsole_speed=19200
console=comconsole,vidconsole
Does it
On Wed, 5 Jun 2013, Dimitry Andric wrote:
On Jun 4, 2013, at 23:32, Alban Hertroys haram...@gmail.com wrote:
I can't seem to get my serial terminal to work with my new system.
...
cat /boot.config
-D -S19200
cat /boot/loader.conf
boot_multicons=YES
boot_serial=YES
comconsole_speed=19200
On Tue, Jun 04, 2013 at 11:32:48PM +0200, Alban Hertroys wrote:
I can't seem to get my serial terminal to work with my new system.
I had a serial terminal connected to my old system that worked great
and copied /boot.config, /boot/loader.conf and /etc/ttys settings over
from it.
The new