Sten Daniel Sørsdal wrote:
> Sam Leffler wrote:
>> I've lost context about your problem but it appears you're having
>> trouble associating with "trejago" sometimes. The failed scan shows
>> that your rssi was only 6 when you were having problems which is a very
>> marginal signal so I'm not at al
On Mon, September 25, 2006 3:46 pm, Sten Daniel Sørsdal wrote:
> Sam Leffler wrote:
>> freebsd does not support XR mode.
> Are there any plans to support this?
> What about fastframes/bursting? 10Mhz, 5Mhz channels?
> WDS? Virtual AP? Is there any place where i can read about this?
> Apologies if
Sam Leffler wrote:
> I've lost context about your problem but it appears you're having
> trouble associating with "trejago" sometimes. The failed scan shows
> that your rssi was only 6 when you were having problems which is a very
> marginal signal so I'm not at all surprised you're having trouble
Sam> I've lost context about your problem but it appears you're having
Sam> trouble associating with "trejago" sometimes. The failed scan shows
Sam> that your rssi was only 6 when you were having problems which is a
Sam> very marginal signal so I'm not at all surprised you're having
Sam> tro
Dmitry Karasik wrote:
> Hi Sam!
>
> Sam> I do not understand what "bad connectivity" means.
>
> I'm not a native speaker so I've apparently used a wrong term, I apologize
> for the confusion. Instead I should've probably said "low signal strength".
>
> Sam> If you provide
> Sam> infor
Hi Sam!
Sam> I do not understand what "bad connectivity" means.
I'm not a native speaker so I've apparently used a wrong term, I apologize
for the confusion. Instead I should've probably said "low signal strength".
Sam> If you provide
Sam> information like the mac+phy revs for the c
I'm sorry that I don't have freebsd on my system to do more testing
but I'm pretty sure it's the ath0 interface that's causing the issue.
When the interface is down limewire starts normally but when it's up
it takes about 3 minutes to load. I have tried upgrading to stable but
it's still the same
Radu Adrian Zdrinca wrote:
I have had similar problems with the driver. The signal quality in
Windows is higher. But there are other problems. For example, when I
start Limewire I have to wait for about 3 minutes before it loads. I
am sure this is a problem with ath interface.
If I recall correc
Radu Adrian Zdrinca wrote:
> I have had similar problems with the driver. The signal quality in
> Windows is higher. But there are other problems. For example, when I
> start Limewire I have to wait for about 3 minutes before it loads. I
> am sure this is a problem with ath interface.
How do you k
Dmitry Karasik wrote:
> Hi,
>
> Has anyone experienced problems with ath0 giving bad connectivity on
> 6.1-STABLE? My wireless card reported as Atheros 5212 rapidly loses
> connectivity if I move it more than 2-3 meters away from the access
> point, but the same notebook connects well from under w
enabled
(Mark Kirkwood)
12. Re: bge watchdog timeouts still happening (Ronald Klop)
13. Re: Problems with auditd -- resolved (Ganbold)
14. ath0 weak connectivity (Dmitry Karasik)
15. Re: Problems with auditd -- resolved (Robert Watson)
16. Re: Problems with auditd -- resolved (Ganbold)
17. Re:
Hi,
Has anyone experienced problems with ath0 giving bad connectivity on
6.1-STABLE? My wireless card reported as Atheros 5212 rapidly loses
connectivity if I move it more than 2-3 meters away from the access
point, but the same notebook connects well from under windows.
I tried both kernel with
12 matches
Mail list logo
