Hi, My most recent CVSup (Mon Sep 18 03:27:06 SGT 2000 (which is GMT+8)) of 4.1-Stable is causing me grief with the csa device. Following the UPDATING procedure religiously, which has always been working A-OK, I do: make buildworld make buildkernel KERNEL=ZARGKERNEL make installkernel KERNEL=ZARGKERNEL [reboot laptop] After the reboot, the system kernel probes the pcic-pci0 and pcic-pci1 devices, and then the csa0 device: chip1: <Intel 82371AB Power management controller> port 0x1400-0x140f at device 7.3 on pci0 pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 8.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 8.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] csa0: <Crystal Semiconductor CS4614/4622/4624 Audio accelerator/4280 Audio controller> mem 0xe9000000-0xe90fffff,0xe8000000-0xe8000fff irq 5 at device 9.0 on pci0 and then locks up right there. No panic, no nothing. If I modify my kernel config and take out the pcm device and csa device, the kernel boots fine. Seeing as to how no one else has reported a similar problem, are there any suggestions on how I should go about cracking this problem? For a start, I've (verbosely) included (a) hung.console.txt, which is the text I see on my screen (typed out) when I boot -v; (b) dmesg.GENERIC, which is the dmesg output from booting the generic 4.1-R kernel, and (c) ZARGKERNEL, my kernel config. I hope to get the csa device back... oh yes, previous to these recent CVSup's, the csa has been mostly okay. Thanks for any help. Regards -T.W.Chan-
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] PCI Config space: 00: ac1c104c 02100007 06070001 00820000 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010a 40: ac1c1071 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 2044b060 00000000 00000000 01dc1622 90: 606402c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: f000e2c3: f000c899: 10: 00000000: f000ff54: f000c899: f000c89a: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 csa0: <Crystal Semiconductor CS4614/4622/4624 Audio accelerator/4280 Audio controller> mem 0xe9000000-0xe90fffff,0xe8000000-0xe8000fff irq 5 at device 9.0 on pci0
Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 331861952 Hz, i8254 clock: 1193296 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (331.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 100597760 (98240K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00426000 - 0x05fe7fff, 96215040 bytes (23490 pages) avail memory = 93622272 (91428K bytes) bios32: Found BIOS32 Service Directory header at 0xc00e8050 bios32: Entry = 0xeb170 (c00eb170) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x31b0 pnpbios: Found PnP BIOS data at 0xc00ff020 pnpbios: Entry = ec000:2fb2 Rev = 1.0 pnpbios: OEM ID 8224744e Other BIOS signatures found: ACPI: 000f0010 Preloaded elf kernel "kernel.old" at 0xc040d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 20000000, size 28 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001100, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=128 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00001400, size 4 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 found-> vendor=0x1013, dev=0x6003, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base e8000000, size 12 map[14]: type 1, range 32, base e9000000, size 20 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x1002, dev=0x4c42, revid=0xdc class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base e4000000, size 24 map[14]: type 1, range 32, base 0000d000, size 8 map[18]: type 1, range 32, base e6000000, size 12 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c42 graphics accelerator> (vendor=0x1002, dev=0x4c42) at 0.0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1100-0x110f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1100 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1108 ata1: mask=03 status0=50 status1=01 ata1: mask=03 status0=00 status1=01 ata1: devices = 0xc ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 128 at device 7.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 chip1: <Intel 82371AB Power management controller> port 0x1400-0x140f at device 7.3 on pci0 pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 8.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac1c104c 02100007 06070001 00820000 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010a 40: ac1c1071 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 20449060 00000000 00000000 01dc1622 90: 606402c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: f000e2c3: f000c899: 10: 00000000: f000ff54: f000c899: f000c89a: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 8.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq] PCI Config space: 00: ac1c104c 02100007 06070001 00820000 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010a 40: ac1c1071 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 20449060 00000000 00000000 01dc1622 90: 606402c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: f000e2c3: f000c899: 10: 00000000: f000ff54: f000c899: f000c89a: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 9.0 irq 5 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 1a 03 3c psm: status 1a 03 3c psm: status 1a 03 3c psm: data c8 c6 51 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 53 84 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 53 84 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached isa_compat: didn't get irq for lnc isa_probe_children: probing PnP devices BIOS Geometries: 0:03fdfe3f 0..1021=1022 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03ff0001 0..1023=1024 cylinders, 0..0=1 heads, 1..1=1 sectors 2:03ff0001 0..1023=1024 cylinders, 0..0=1 heads, 1..1=1 sectors 3:03ff0001 0..1023=1024 cylinders, 0..0=1 heads, 1..1=1 sectors 0 accounted for Device configuration finished. RTC BIOS diagnostic error 20<config_unit> bpf: sl0 attached bpf: ppp0 attached new masks: bio 68c040, tty 63109a, net 67109a bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: <IBM-DARA-212000/AR4OA51A> ATA-4 disk at ata0 as master ad0: 11513MB (23579136 sectors), 23392 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: <CD-224E/1.0A> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-DA stream acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xb, start 63, end = 12289724, size 12289662 : OK ad0s2: type 0xa5, start 12289725, end = 23567354, size 11277630 : OK start_init: trying /sbin/init Linux-ELF exec handler installed splash: image decoder found: fade_saver xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 11 slot 1 on pccard1 pcic: I/O win 1 flags 17 100-10f xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0 xe0: Ethernet address 00:10:a4:e3:a5:b9 bpf: xe0 attached xe0: watchdog timeout; resetting card
# # ZARGKERNEL machine i386 ident ZARGKERNEL maxusers 32 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols ##################################################################### # SMP OPTIONS: # ##################################################################### # CPU OPTIONS cpu I586_CPU # aka Pentium(tm) cpu I686_CPU # aka Pentium Pro(tm) options NO_F00F_HACK ##################################################################### # COMPATIBILITY OPTIONS options COMPAT_43 options USER_LDT #allow user-level control of i386 ldt options SYSVSHM options SYSVSEM options SYSVMSG ##################################################################### # DEBUGGING OPTIONS options DDB options KTRACE #kernel tracing options UCONSOLE options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor ##################################################################### # NETWORKING OPTIONS options INET #Internet communications protocols #options INET6 #IPv6 communications protocols #options IPX #IPX/SPX communications protocols #options NCP #NetWare Core protocol # # Network interfaces: pseudo-device ether #Generic Ethernet pseudo-device loop #Network loopback device pseudo-device bpf #Berkeley packet filter pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8)) pseudo-device sl 1 #Serial Line IP pseudo-device ppp 1 #Point-to-point protocol #pseudo-device ef # Multiple ethernet frames support #options ETHER_II # enable Ethernet_II frame #options ETHER_8023 # enable Ethernet_802.3 (Novell) frame #options ETHER_8022 # enable Ethernet_802.2 frame #options ETHER_SNAP # enable Ethernet_802.2/SNAP frame # for IPv6 #pseudo-device gif 4 #IPv6 and IPv4 tunneling #pseudo-device faith 1 #for IPv6 and IPv4 translation # # Internet family options: # #options IPFIREWALL #firewall #options IPFIREWALL_VERBOSE #print information about # dropped packets #options IPFIREWALL_FORWARD #enable transparent proxy support #options IPDIVERT #divert sockets #options IPFILTER #ipfilter support options ICMP_BANDLIM ##################################################################### # FILESYSTEM OPTIONS options FFS #Fast filesystem options NFS #Network File System options CD9660 #ISO 9660 filesystem options KERNFS #Kernel filesystem options MSDOSFS #MS DOS File System #options NWFS #NetWare filesystem options PROCFS #Process filesystem options CD9660_ROOT #CD-ROM usable as root device options FFS_ROOT #FFS usable as root device options SOFTUPDATES #options EXT2FS ##################################################################### # POSIX P1003.1B options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING ##################################################################### # SCSI DEVICES #device scbus #base SCSI code ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS pseudo-device pty #Pseudo ttys pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device md #Memory/malloc disk ##################################################################### # HARDWARE DEVICE CONFIGURATION device isa device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event device vga0 at isa? options VESA pseudo-device splash device sc0 at isa? options SC_HISTORY_SIZE=500 # number of history buffer lines # The following options will let you change the default colors of syscons. #options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)" #options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)" #options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" #options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" device npx0 at nexus? port IO_NPX flags 0x0 irq 13 # # Optional ISA and EISA devices: device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 #device wdc0 at isa? port IO_WD1 irq 14 #device wd0 at wdc0 drive 0 #device wd1 at wdc0 drive 1 #device wdc1 at isa? port IO_WD2 irq 15 #device wd2 at wdc1 drive 0 #device wd3 at wdc1 drive 1 device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # # Other standard PC hardware: `mse', `sio', etc. # device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # # Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc' # device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 device xe0 # # ATM related options # # # Audio drivers: `snd', `sb', `pas', `gus', `pca' device pcm # device csa0 at isa? port 0x220 irq 5 drq 1 flags 0x13 device pca0 at isa? port IO_TIMER1 #device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 device csa0 # # Miscellaneous hardware: # device apm0 device joy0 at isa? port IO_GAME # # MCA devices: # # # EISA devices: # # # PCI devices & PCI options: # device pci device miibus device vr # VIA Rhine, Rhine II device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) device tx # SMC 9432TX (83c170 ``EPIC'') # # PCCARD/PCMCIA # device pcic0 at isa? device pcic1 at isa? device card options PCIC_RESUME_RESET # reset after resume # # Laptop/Notebook options: # # # SMB bus # # # I2C Bus # # Parallel-Port Bus # device ppc0 at isa? irq 7 device ppbus device lpt device plip device ppi # USB support # UHCI controller device uhci # OHCI controller device ohci # General USB code (mandatory for USB) device usb # # Generic USB device driver device ugen device uhid # Human Interface Device device ukbd # USB keyboard device ulpt # USB printer # device umass # USB Iomega Zip 100 Drive device ums # USB mouse # debugging options for the USB subsystem # options UHCI_DEBUG options OHCI_DEBUG options USB_DEBUG options UGEN_DEBUG options UHID_DEBUG options UHUB_DEBUG options UKBD_DEBUG options ULPT_DEBUG # options UMASS_DEBUG options UMS_DEBUG