On Thu, Jul 18, 2013 at 3:28 PM, John Reynolds wrote:
> One person said to fiddle in the BIOS with the USB settings. I went into
> the BIOS and disabled "Intel USB 3.0 Mode" support (this is a very new
> motherboard with USB 3.0). That fixed the issue! For those curious about
> -current, I also tr
On Thu, Jul 18, 2013 at 01:28:10PM -0700, John Reynolds wrote:
> On 7/18/2013 8:49 AM, Glen Barber wrote:
> >On Wed, Jul 17, 2013 at 08:49:39PM -0700, John Reynolds wrote:
> >>today. I will most definitely report back any findings. Thanks for
> >>your reply!
> >>
> >John, in addition to suggestions
On 7/18/2013 8:49 AM, Glen Barber wrote:
On Wed, Jul 17, 2013 at 08:49:39PM -0700, John Reynolds wrote:
today. I will most definitely report back any findings. Thanks for
your reply!
John, in addition to suggestions/replies from others, can you also try
the 10.0-CURRENT snapshot? In particula
On Thu, Jul 18, 2013 at 08:48:28AM -0700, John Reynolds wrote:
> On 7/18/2013 12:36 AM, Steven Hartland wrote:
> >Is the SSD running at 6Gbps? If so have you tried limiting the speed
> >to 3Gbps?
> I would imagine so. It has a 6Gbps interface and the Z87 board does
> also--so I can only imagine it'
John, in addition to suggestions/replies from others, can you also try
the 10.0-CURRENT snapshot? In particular, if your problem continues
with a SATA drive, I am curious if the problem still exists in head/.
http://ftp.freebsd.org/pub/FreeBSD/snapshots/ISO-IMAGES/
Thanks.
Yes, I can try
You can use: hint.ahcich.X.sata_rev to limit the speed
See man for ahci(4) for more details.
- Original Message -
From: "John Reynolds"
To: "Steven Hartland"
Cc:
Sent: Thursday, July 18, 2013 4:48 PM
Subject: Re: experience with 9.2-PRERELEASE
On 7/18/2
On Wed, Jul 17, 2013 at 08:49:39PM -0700, John Reynolds wrote:
> On 7/17/2013 5:48 PM, Glen Barber wrote:
> >Hi John,
> >
> >
> >Do you have a SATA drive you can try with this hardware? It would be
> >useful to know if that works, or same errors, etc.
> >
> >Glen
> >
> I do, and that was my plan f
On 7/18/2013 12:36 AM, Steven Hartland wrote:
Is the SSD running at 6Gbps? If so have you tried limiting the speed
to 3Gbps?
I would imagine so. It has a 6Gbps interface and the Z87 board does
also--so I can only imagine it's trying to go as fast as possible by
default. I will fiddle with the B
Is the SSD running at 6Gbps? If so have you tried limiting the speed
to 3Gbps?
Regards
Steve
- Original Message -
From: "John Reynolds"
To:
Sent: Thursday, July 18, 2013 1:45 AM
Subject: experience with 9.2-PRERELEASE
Hello all, I have some feedback for the recentl
On 7/17/2013 5:48 PM, Glen Barber wrote:
Hi John,
Do you have a SATA drive you can try with this hardware? It would be
useful to know if that works, or same errors, etc.
Glen
I do, and that was my plan for tomorrow. A bit under the weather today.
I will most definitely report back any findi
On Wed, Jul 17, 2013 at 7:45 PM, John Reynolds wrote:
> to the SSD that I used as the primary hard drive. So, then I figured I
> would try a more recent snapshot hoping that something had been spotted and
> fixed already. I got the 9.2-PRERELEASE amd64 snapshot and tried to install
> it. However,
On Wed, 17 Jul 2013, John Reynolds wrote:
The final blow to my sanity was when I rolled back and tried to install
8.4-RELEASE and sysinstall couldn't make the disk devices after I hit 'W' in
the disk label editor to commit my changes.
Somewhere, there is a FAQ or note that you should not pres
Hi John,
On Wed, Jul 17, 2013 at 05:45:29PM -0700, John Reynolds wrote:
> Hello all, I have some feedback for the recently prepared snapshot
> of 9.2-RELEASE.
>
> I've been trying like crazy to get the 9x series code installed on a
> brand new workstation I'm building. It consists of a brand new
Hello all, I have some feedback for the recently prepared snapshot of
9.2-RELEASE.
I've been trying like crazy to get the 9x series code installed on a
brand new workstation I'm building. It consists of a brand new ASRock
motherboard and haswell i7-4770k processor, Z87 chipset. I tried at
fir
14 matches
Mail list logo
