On 12.09.2014 20:53, Andriy Gapon wrote:
From my experience I think that cupsd executes backend tools with all uids and
gids set to cups and no supplementary groups. In the case of USB printers the
backends need to access /dev/usbctl and /dev/usb/foobar that corresponds to a
printer. That mea
On 23.08.2014 01:17, Miguel Clara wrote:
I know FreeBSD suppots (at least according to the guide) usb tether, but
some devices when connected via USB are visible as a network interface and
this allows file sharing among other things!
I have a Blackberry 10 device and I'm wondering if this is som
14.02.2014 10:20, Hans Petter Selasky wrote:
On 02/12/14 16:52, Volodymyr Kostyrko wrote:
Hi all.
# usbconfig -d 5.2 dump_device_desc
ugen5.2: at usbus5, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=ON (200mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass
Hi all.
# usbconfig -d 5.2 dump_device_desc
ugen5.2: at usbus5, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=ON (200mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x
bDeviceSubClass = 0x
bDeviceProtocol = 0x
bMaxPacketSize0 = 0x0040
idVendor =
04.12.2012 09:22, Hans Petter Selasky:
Maybe just my local glitch though. I'll try to retest tomorrow.
devd must be enabled when you boot the system or plug the device.
That was my fault. I tested how libc++ works with world/ports and it
seems that devd perfectly compiles with libc++ but wor
03.12.2012 23:25, Hans Petter Selasky:
On Monday 03 December 2012 20:04:59 Volodymyr Kostyrko wrote:
03.12.2012 20:09, Hans Petter Selasky:
On Monday 03 December 2012 16:14:56 Volodymyr Kostyrko wrote:
Hi all.
Maybe I just blow out my installation again but I have two machines on
9_STABLE
03.12.2012 20:09, Hans Petter Selasky:
On Monday 03 December 2012 16:14:56 Volodymyr Kostyrko wrote:
Hi all.
Maybe I just blow out my installation again but I have two machines on
9_STABLE that for one week refuse to autoload usb device drivers.
Before that my Keyboard and mice start
Hi all.
As per man page run driver supports DWA-140, but I currently obtained
one piece that identifies as:
# usbconfig -d 0.2 dump_device_desc
ugen0.2: <11n Adapter D-Link> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
Hi all.
Maybe I just blow out my installation again but I have two machines on
9_STABLE that for one week refuse to autoload usb device drivers.
Before that my Keyboard and mice start automatically. But right now I
must explicitly load kernel module for each device.
--
Sphinx of black quart
Volodymyr Kostyrko wrote:
I just got myself a small plaything for a limited amount of time:
And here how it fails:
Jan 19 16:30:48 faz kernel: uath0: uath_cmdsend: empty inactive queue
Jan 19 16:30:48 faz kernel: uath0: could not flush pipes, error 55
Jan 19 16:30:48 faz kernel: uath0
Hello.
I just got myself a small plaything for a limited amount of time:
Jan 19 15:18:44 faz kernel: Trying to mount root from zfs:faz0 []...
Jan 19 15:18:44 faz kernel: uath0: rev 2.00/0.01, addr 2> on usbus6
Jan 19 15:18:44 faz kernel: uath0: uath_cmdeof: invalid WDC msg length
512; msg ignor
I think this one is MFC'ed into RELENG_8 long time ago. Can we close the PR?
--
Sphinx of black quartz judge my vow.
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd
The following reply was made to PR usb/149934; it has been noted by GNATS.
From: Volodymyr Kostyrko
To: bug-follo...@freebsd.org, freebsd-usb@FreeBSD.org
Cc:
Subject: Re: usb/149934: Transcend JetFlash V85 poor performance
Date: Fri, 30 Dec 2011 15:50:06 +0200
I think this one is MFC'ed
The following reply was made to PR usb/163328; it has been noted by GNATS.
From: Volodymyr Kostyrko
To: Andrei
Cc: freebsd-gnats-sub...@freebsd.org
Subject: Re: usb/163328: Hardware
Date: Fri, 16 Dec 2011 11:03:05 +0200
16.12.2011 08:11, Andrei wrote:
> не Ð¼Ð¾Ð³Ñ Ð¿Ð¾Ð´ÐºÐ»ÑÑиÑÑ
20.02.2011 22:04, Gary Palmer wrote:
On Sun, Feb 20, 2011 at 01:01:19PM +0200, Volodymyr Kostyrko wrote:
Normally there isn't a /dev node for ubt0 (although I'm not sure what version
of FreeBSD you're running) as its hooked through netgraph - try
running "ngctl list"
20.02.2011 14:06, Volodymyr Kostyrko wrote:
20.02.2011 13:25, Hans Petter Selasky wrote:
On Sunday 20 February 2011 12:01:19 Volodymyr Kostyrko wrote:
3. /etc/rc.d/bluetooth start ubt0
/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for
device ubt0
You need to run this twice:
3
20.02.2011 13:25, Hans Petter Selasky wrote:
On Sunday 20 February 2011 12:01:19 Volodymyr Kostyrko wrote:
3. /etc/rc.d/bluetooth start ubt0
/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
You need to run this twice:
3. /etc/rc.d/bluetooth start ubt0
/etc/rc.d
20.02.2011 11:31, Hans Petter Selasky wrote:
On Sunday 20 February 2011 01:47:33 Volodymyr Kostyrko wrote:
I have something like:
Feb 20 02:43:16 limbo kernel: ugen2.3: at usbus2
Feb 20 02:43:16 limbo kernel: uhub4: on usbus2
Feb 20 02:43:16 limbo kernel: uhub4: 3 ports with 0 removable, bus
I have something like:
Feb 20 02:43:16 limbo kernel: ugen2.3: at usbus2
Feb 20 02:43:16 limbo kernel: uhub4: 1.10/1.00, addr 3> on usbus2
Feb 20 02:43:16 limbo kernel: uhub4: 3 ports with 0 removable, bus powered
Feb 20 02:43:17 limbo kernel: ugen2.4: at usbus2
Feb 20 02:43:17 limbo kernel: ub
The following reply was made to PR usb/149934; it has been noted by GNATS.
From: Volodymyr Kostyrko
To: Hans Petter Selasky
Cc: freebsd-usb@freebsd.org, freebsd-gnats-sub...@freebsd.org
Subject: Re: usb/149934: Transcend JetFlash V85 poor performance
Date: Wed, 25 Aug 2010 00:17:25 +0300
The following reply was made to PR usb/149934; it has been noted by GNATS.
From: Volodymyr Kostyrko
To: Hans Petter Selasky
Cc: freebsd-usb@freebsd.org, freebsd-gnats-sub...@freebsd.org
Subject: Re: usb/149934: Transcend JetFlash V85 poor performance
Date: Wed, 25 Aug 2010 00:43:05 +0300
25.08.2010 00:27, Hans Petter Selasky wrote:
I've committed my updated patch to USB P4. See change #182862.
Please verify that your drive is still working with the new patch.
Yes, i've tested my drive exactly with this patch.
Say, how about UQ_MSC_NO_TEST_UNIT_READY? You have omitted it on pu
24.08.2010 18:11, Hans Petter Selasky wrote:
Can you test this patch instead:
--- sys/dev/usb/quirk/usb_quirk.c 2010-08-10 16:03:19.0
+++ sys/dev/usb/quirk/usb_quirk.c 2010-08-10 16:03:19.0
@@ -160,10 +160,8 @@
USB_QUIRK(ALCOR, AU6390, 0x, 0x, UQ
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Tue Aug 24 11:40:02 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Volodymyr Kostyrko
>Release:RELENG_8
>Organization:
>Environment:
FreeBSD limbo.lan 8.1-STABLE Fr
23.08.2010 22:39, Mykola Dzham wrote:
This is bcdDevice range. So, change first 0x0142 to 0x100 for your
flash drive or add another quirk (before quirk for all TRANSCEND's)
with 3-4 places set to 0x100.
Yes, that was the key. I'll file a pr for that.
--
Sphinx of black quartz judge my vow.
___
Hi people.
Our technical staff are working with some device that can do serial over
USB but they have no controller. This devices implements USB in software
(at least they told me so) at atmel arm.
usbconfig -d x.x dump_device_desc gives me:
ugen4.2: at usbus4, cfg=0
md=HOST spd=FULL (12Mb
21.08.2010 21:29, Hans Petter Selasky wrote:
You can use usbconfig to add quirks on the fly. See:
usbconfig -h
And:
man usbconfig
Tried that, but it doesn't work for me or I'm messing things up...
usbconfig -d 3.3 add_quirk UQ_MSC_NO_SYNC_CACHE
And errors continue to show up. The man page
20.08.2010 00:38, Hans Petter Selasky wrote:
You can use usbconfig to add quirks on the fly. See:
usbconfig -h
And:
man usbconfig
Tried that, but it doesn't work for me or I'm messing things up...
usbconfig -d 3.3 add_quirk UQ_MSC_NO_SYNC_CACHE
And errors continue to show up. The man page
Hi people.
Just recently saw the message on STABLE:
MFC r210931:
Disable sync cache for the Transcend Jetflash V90.
This sounds good since I have the same problem with my JetFlash V85:
Aug 19 23:33:55 limbo kernel: (da4:umass-sim1:1:0:0): SYNCHRONIZE
CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
Aug 19
29 matches
Mail list logo