Hi list,
I tried to passthrough my wifi card, listing as:
ppt0@pci0:5:0:0:class=0x028000 card=0x00848086 chip=0x27238086 rev=0x1a
hdr=0x00
vendor = 'Intel Corporation'
device = 'Wi-Fi 6 AX200'
class = network
However, in Linux I get the dmesg from below [1]
I am
Compression starts when you activate it, so all data added will be
compressed.
In order to have the data compressed that was on the volume before
compression was set, you have to save the data again on that volume,
e.g. copy the data away with dd and then dd it again to the volume. A
better soluti
ostfix.
You could also use jails - much better in terms of latency and resource
consumption.
regards,
infoomatic
On 11.08.20 13:48, Odhiambo Washington wrote:
> Hi,
>
> I have a FreeBSD 12.1 server, with 16GB RAM and several CPU cores.
> It has just 1 public IP.
> Although it
My recommendation is using wlan0 on the host with a dedicated IP
address, and then using a bridge just with the epair interfaces (or
whatever you use) of your VMs, using NAT and port redirection
On 27.11.20 18:03, tech-lists wrote:
> Hi,
>
> As subject: can a machine that only uses wlan0 for its
Hi all,
I own a pcengines apu2e4 where bhyve passthru is working in general.
Passing through the i210AT NICs works fine. However, I bought a Compex
WLE200NX a/b/g/n miniPCI card which is based on the Qualcomm Atheros
AR9280 chip I also want to pass through.
On the host I am running 12.2-RELEASE-p
fyi: I gave 13.0-RC4 a try, but this did not work out neither...
On 28.03.21 21:56, infoomatic wrote:
> Hi all,
>
> I own a pcengines apu2e4 where bhyve passthru is working in general.
> Passing through the i210AT NICs works fine. However, I bought a Compex
> WLE200NX a/b/g/n min
On 05.04.21 16:00, Ka Ho Ng wrote:
> On 4/5/21 9:54 pm, Ka Ho Ng wrote:
>>
>> Could you cherry-pick the follow commits and see if they works?
>> ede14736fd6d74db0374f4a233491ad5dc0e9b1d
>> 74ada297e8978b8efda3dffdd1bb24aee7c5faa4
>> cf76495e0a30043503ef126f0a485e314730a221
>> 03efa462b2ab3ae8166598
Hi,
I just wanted to share my experience with bhyve + windows, maybe someone
has had the same experience or wants to instruct me to further debug
this, also a comment on why this is not working is welcome ;-)
While I run a Windows 10 VM in bhyve successfully on my Ryzen 7 3700X, I
tried to instal
On 07.04.21 13:16, infoomatic wrote:
> but as soon as I try to update Windows it starts downloading the
> updates, after a few minutes the CPU (tried with single core and multi
> core; on the host: HT is disabled) is at 100%, the mouse does not move
> (via VNC), and RDP connections to
