handle my problem ?
On 19-02-16 09:46, Vladimir Botka wrote:
Hi,
On Thu, 18 Feb 2016 22:17:25 +0100
Chris Van Steenlandt wrote:
I recently installed FreeBSD release 10.2 on my old Sony Vaio laptop. It
has an intel 3945ABG wireless interface.
A lot of times however, I get the following two
Hi,
I recently installed FreeBSD release 10.2 on my old Sony Vaio laptop. It
has an intel 3945ABG wireless interface.
A lot of times however, I get the following two messages that pop up :
wpi0: Radio transmitter is switched off
wpi0: Hardware Switch Enabled.
Kind of strange because I leave my
Indeed,
I forgot about dhcp :(
If I do that, it works ok. What I did notice after 'dhclient wlan0' is
after a while the message :
dhclient [2628]: send_packet : No buffer space available
Chris
On 23-08-14 23:58, Adrian Chadd wrote:
Hi,
Ther'es two separate problems; 5ghz transmit, and your
too busy /
distracted to sit down and fix it. It's not a conceptually difficult
thing to fix - someone just has to do it. :P
-a
On 23 August 2014 13:59, Chris Van Steenlandt
wrote:
Adrian,
- ifconfig step (creation of pseudo device) completed successfully
- wpa_supplicant gives the following ty
Adrian,
- ifconfig step (creation of pseudo device) completed successfully
- wpa_supplicant gives the following type of output (I can't paste it
here, but I'll describe the structure of the output) :
1st message : Initialization successfull
Then the following blocks of messages (they alternat
Adrian,
now I understand why I have to put everything on one line :)
I tried what you suggested (only "WPA DHCP") and that what's the intial
install generated too. But in that case my wireless does not connect to
my ssid and keeps on scanning all channels and never connects ...
That's why I s
Julian,
I was not aware rc.conf was so sensitive to white space ...
I even think it shouldn't.
Anyhow the blanks were not really there in my rc.conf. I had to retype
everything in my mail (since my laptop's network doesn't work :) and I
made a few typo's.
But what I did do is try to put everyt
Hello everyone,
I'm doing my first FreeBSD install (10.0) on an old laptop with an Intel
3945 interface. During the install I already noticed strange behaviour
since the installer gave me a "DHCP lease failed". The second time it
passed. FWIW, I installed with root on ZFS and the laptop has 1