Hi,
Just stumbled upon this thread in the mailing list archives and wanted
to leave a note about my experience. I was running into the same problem
-- appeared to be associated, but was not passing any traffic.
rsu0: vendor 0x0bda product 0x8171, class 0/0, rev 2.00/2.00, addr 4
on usbus0
rsu0:
But does this patch somewhat improve the association issue?
(previous message is found at
https://lists.freebsd.org/pipermail/freebsd-wireless/2014-November/005227.html
)
Index: sys/dev/usb/wlan/if_rsu.c
==
=
---
No worries :)
Got any advice on how to diagnose why it's able to scan and lock onto the
ssid (shows it in ifconfig), but not able to get an IP address with DHCP or
communicate with a manual IP address?
On Tuesday, November 18, 2014, Kevin Lo ke...@freebsd.org wrote:
Argh! I think I need more
Hmm... turns out this is an issue with authentication with wpa_supplicant.
If I turn off security I can connect just fine.
Other devices devices on my network are connecting fine with WPA2 AES PSK.
My wifi router is a TP-Link Archer D9 operating with both 2.4GHz and 5GHz.
I will go and try on
from Benjamin Woods:
I am trying to get my D-Link DWA-131 A1 working, with some success but no
network connectivity.
It shows up in my usb list with device id 07d1:3303. The driver pages
suggest this should be working with the rsu(4) driver and potentially
the rsu-rtl8712fw firmware,
2014-11-18 11:04 GMT+01:00 Ben Woods woods...@gmail.com:
Hmm... turns out this is an issue with authentication with wpa_supplicant.
If I turn off security I can connect just fine.
Well, disabling AP security features is not the right solution.
I have the EDUP adapter that uses if_rsu, and when
Hey guys,
I am trying to get my D-Link DWA-131 A1 working, with some success but no
network connectivity.
It shows up in my usb list with device id 07d1:3303. The driver pages
suggest this should be working with the rsu(4) driver and potentially
the rsu-rtl8712fw firmware, according to these:
I should mention I am running FreeBSD 10.1-RELEASE
--
From: Benjamin Woods
woods...@gmail.com
On 18 November 2014 13:23, Ben Woods woods...@gmail.com wrote:
Hey guys,
I am trying to get my D-Link DWA-131 A1 working, with some success but no
network connectivity.
It shows up in my usb
There seems to be some misalignment with the official release notes, which
specifically mention the D-Link DWA-131 A1 is supported:
https://www.freebsd.org/releases/10.1R/hardware.html
However, according to this page it is the RTL8191SU chipset:
https://wikidevi.com/wiki/D-Link_DWA-131_rev_A1
