On Mon, Dec 15, 2014 at 1:24 AM, Miguel Clara
wrote:
>
>
> On Mon, Dec 15, 2014 at 12:30 AM, Miguel Clara
> wrote:
>>
>>
>> On Sun, Dec 14, 2014 at 11:34 PM, David P. Discher
>> wrote:
>>>
>>> First make sure you CPU supports both EPT and has a IOMMU.
>>>
>>
>> Yes it does.
>>
>> I should note t
On Mon, Dec 15, 2014 at 12:30 AM, Miguel Clara
wrote:
>
>
> On Sun, Dec 14, 2014 at 11:34 PM, David P. Discher
> wrote:
>>
>> First make sure you CPU supports both EPT and has a IOMMU.
>>
>
> Yes it does.
>
> I should note theat I've already tested with Xen in this laptop using
> Debian.
>
>
>>
>
On Sun, Dec 14, 2014 at 11:34 PM, David P. Discher wrote:
>
> First make sure you CPU supports both EPT and has a IOMMU.
>
Yes it does.
I should note theat I've already tested with Xen in this laptop using
Debian.
>
> It sounds like you have Xen to use the serial console.
>
> To /etc/ttys, you
First make sure you CPU supports both EPT and has a IOMMU.
It sounds like you have Xen to use the serial console.
To /etc/ttys, you need to add:
xc0 "/usr/libexec/getty Pc" vt100 on secure
Also, make sure all the ttyu[0-4] are off. Recent versions of FreeBSD maybe
putting onifcon
I was just trying too boot Freebsd Xen dom0 on a laptop but I just get a
black screen after the boot process
any idea what it could be?
the system boots fine wihtout loading "boot/xen", I'm not sure how to get
more info with the black scren!
thanks
Melhores Cumprimentos // Best Regards
--
ah, sorry missed that. Will try that today.
AHCI lasted over night with MSI off. Something I noticed, is that when the
AHCI bus was timing out, it looked like the Xen Kernel was re-scanning the PCI
bus. (Sorry, didn’t save these logs). I’ve love to dig into this further.
Please let me
Hello,
El 08/12/14 a les 23.45, David P. Discher ha escrit:
>
> Sent SIGTERM to all processes
> │
> Sent SIGKILL to all
> processes───┘
> Requesting system reboot
> [ 1157.299205]
I tried all the combinations of things … and still couldn’t get the xen console
switch to work. I finally googled "xen X8STi console”, and found -
http://wiki.xen.org/wiki/Xen_Serial_Console - which calls out the super micro
board X8STi - with the options:
com1=115200,8n1,0x3e8,5
I don’t
El 04/12/14 a les 22.28, David P. Discher ha escrit:
> Update: So, I changed a few things, and stuff is working better.
>
> The Xen kernel line is now:
>
> dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 sync_console
> com1=115200,8n1,0x3e8 console=vga,com1 iommu=debug
I would advise against sync_c
Update: So, I changed a few things, and stuff is working better.
The Xen kernel line is now:
dom0_mem=2048M dom0_max_vcpus=4 dom0pvh=1 sync_console com1=115200,8n1,0x3e8
console=vga,com1 iommu=debug
Also note, I have these set in FreeBSD:
console="comconsole vidconsole"
comconsole_speed=
On Dec 4, 2014, at 12:46 AM, Roger Pau Monné wrote:
> Hello,
>
> El 04/12/14 a les 3.27, David P. Discher ha escrit:
>> So, the “working” part … the hypervisor up, and Dom0 running, is correct.
>>
>> However, after ~5 minutes, the AHCI buses timeout. This seems to be
>> constantly
>> repr
Hello,
El 04/12/14 a les 3.27, David P. Discher ha escrit:
> So, the “working” part … the hypervisor up, and Dom0 running, is correct.
>
> However, after ~5 minutes, the AHCI buses timeout. This seems to be
> constantly
> reproducible via Dom0. FreeBSD on the this bare metal does’t have this
So, the “working” part … the hypervisor up, and Dom0 running, is correct.
However, after ~5 minutes, the AHCI buses timeout. This seems to be constantly
reproducible via Dom0. FreeBSD on the this bare metal does’t have this issue.
-
David P. Discher
http://davidpdischer.com/
AIM: DavidDPD |
On Dec 3, 2014, at 11:55 AM, Roger Pau Monné wrote:
>
> Not sure what's going on now, could you post the full boot log with the
> provided patch applied and when it hangs switch to the Xen console
> (Ctrl+A 3 times), then press "i" and "Q" and also post the output?
>
> Also, add the following t
El 03/12/14 a les 20.35, David P. Discher ha escrit:
>
>
>
> On Dec 3, 2014, at 10:43 AM, Roger Pau Monné wrote:
>
>> Thanks for being able to test this so quickly, AFAICT this is a fallout
>> from failing to initialize ACPI. I don't have a system with this
>> specific ACPI configuration to tr
On Dec 3, 2014, at 10:43 AM, Roger Pau Monné wrote:
> Thanks for being able to test this so quickly, AFAICT this is a fallout
> from failing to initialize ACPI. I don't have a system with this
> specific ACPI configuration to trigger this, but I have the following
> patch, which _might_ solve
Hello,
El 03/12/14 a les 18.18, David P. Discher ha escrit:
>
>
> On Dec 3, 2014, at 5:47 AM, Roger Pau Monné wrote:
>
>> The good news is that I think I have a patch that solves this, but I'm
>> afraid we will also have to debug the ACPI error shown above in order to
>> get your system to a w
On Dec 3, 2014, at 5:47 AM, Roger Pau Monné wrote:
> The good news is that I think I have a patch that solves this, but I'm
> afraid we will also have to debug the ACPI error shown above in order to
> get your system to a working state.
>
> Could you please try the following patch on top of my
Hello,
El 02/12/14 a les 22.26, David P. Discher ha escrit:
> On Dec 2, 2014, at 9:54 AM, Roger Pau Monné wrote:
>
> Below is the boot. One thing I’m not getting, is serial output from the Xen
> kernel. The IPMI SOL is on 0x3e8 (com3), and using com3 doesn’t seem to get
> the xen kernel to
sweet - thanks - Will -
As far as what’s built - it is git://xenbits.xen.org/people/royger/freebsd.git
with branch pvh_dom0_v8:
root@borg:/usr/src # git status
On branch pvh_dom0_v8
Your branch is up-to-date with 'origin/pvh_dom0_v8’.
[…]
And the line numbers:
On Tue, Dec 2, 2014 at 2:26 PM, David P. Discher wrote:
> Can you or someone point me to how to get the line numbers ? Since this is
> panic-ing before swap on/dumpon … I’m not sure out to get the dump and load
> into kgdb with the symbols. My guess is that I need to use remote debugging
> to
On Dec 2, 2014, at 9:54 AM, Roger Pau Monné wrote:
> Hello,
>
> Thanks for trying it out.
I’ve been excited about FreeBSD Dom0 for 4+ years … and excited to see
progress. Once I can get it working, I’ll work on the 4th loader for auto
booting xen+freebsd.
> I assume that this box is capa
Hello,
Thanks for trying it out.
El 02/12/14 a les 17.38, David P. Discher ha escrit:
> Hey All -
>
> Attempting to follow the directions over at :
> http://wiki.xenproject.org/wiki/FreeBSD_Dom0
>
> I’ve confirmed the hard way, not all the bits in the pvh_dom0_v8 -head copy
> of FreeBSD have
Hey All -
Attempting to follow the directions over at :
http://wiki.xenproject.org/wiki/FreeBSD_Dom0
I’ve confirmed the hard way, not all the bits in the pvh_dom0_v8 -head copy of
FreeBSD have been merged into freebsd-head, so running with a working kernel
from the repo over at xenbits. Howev
24 matches
Mail list logo
