On Wed, Dec 27, 2017 at 06:19:54PM -0500, Jonathan Frederickson wrote:
> This is covered in the Syncthing documentation:
> https://docs.syncthing.net/users/relaying.html
>
> Relays are only used to pass (encrypted) traffic when two devices are
> unable to reach each other directly. Shared folders
Hi,
I have installed syncthing but have not configured it yet. While
troubleshooting other stuff I found these troubling messages in
/var/log/messages:
Dec 26 04:41:07 fbx syncthing[524]: [V7KVP] INFO: Disconnected from relay
relay://45.79.172.54:22067
Dec 26 04:41:12 fbx syncthing[524]: [V7KVP
On Sat, Dec 02, 2017 at 10:57:52AM +0100, Daddy wrote:
>Cool!
>
>I see some of them are already included / in the process of being
>integrated (privoxy, ttrss, transmission, jabber, syncthing, ...) - let's
>see if this brings up the discussion about others.
>
>I guess everyone
Hi,
I have set up the dynamic DNS with gnudip.datasystems24.net and a domain
at freedombox.rocks. I thought everything was working fine (no errors)
but I couldn't obtain a let's encrypt certificate. It kept timing out.
ifconfig on the freedombox says:
ppp0: flags=4305 mtu 1500
inet 75
On Fri, Oct 20, 2017 at 05:44:29AM +0200, Petter Reinholdtsen wrote:
> [A. F. Cano]
> > Is there anything I can do short of diving into the plinth code? Is the
> > version number issue the real problem or is it something else? Any specific
> > tests I should run in orde
Just did a massive upgrade on a testing FreedomBox image (32GB SD card).
This particular card had stopped working some months ago so I stopped
using it. Now I'm trying to resurrect it.
I can get into it via ssh and after some hiccups, all the upgraded packages
seem to have been installed correct
Hello everyone,
Accessing an unbootable FreedomBox image as a mounted FS on another
machine, I'm trying to figure out where all the user data I spent so
much time importing is.
I gather that /var/lib/ikiwiki /var/lib/radicale and /var/lib/shaarli is
where it is. Should I be looking somewhere el
hello,
I could only get this out by switching the SD card in the FreedomBox to
an older one. The one that failed just got an upgrade (including
kernel and at least one django package). I'm running the stable
version, with plinth 0.13.1.
The problem: Any attempt to run any application from the i
On Sat, May 06, 2017 at 03:17:07PM -0400, I wrote:
> ...
> In any case, the most puzzling thing right now is: why is the expanded
> partition not reflected when mounted? If this could be solved I could
> probably boot and access this FreedomBox image and delete the snapshots
> the native way, via
I have now installed FreedomBox on 3 separate SD cards and all became
unusable at some point. Details below:
On Tue, May 02, 2017 at 09:29:30PM -0400, A. F. Cano wrote:
> Hi,
>
> Since the expand partition function didn't work, the 3.8 GB FreedomBox
> image got filled up w
Hi,
Since the expand partition function didn't work, the 3.8 GB FreedomBox
image got filled up with snapshots and eventually (presumably because
it got totally filled up) became unbootable and inaccessible by ssh.
So, I mounted it on a Debian testing system (the only one that seems to
be able to
I've set up 2 development systems with Debian Stretch, the first in a VM
and the second on real hardware. In both cases I can't get past the login
screen.
In addition to the dependencies listed in the INSTALL file, more are needed.
I have already reported that firewalld in needed. I also encount
On Sat, Mar 18, 2017 at 10:10:27PM -0400, A. F. Cano wrote:
> ...
> but pointing the browsers to http://localhost:8000 results in this:
>
> konqueror: "The requested operation could not be completed File or
> Folder Does Not Exist"
>
> firefox: b
Hi,
I have set up a VM (VirtualBox) where I installed debian testing.
After
git clone https://github.com/freedombox/Plinth
Per the INSTALL file I installed the dependencies listed there but after
sudo python3 setup.py install
running
sudo plinth
returns an error: missing file 'firewall-cmd
Since I can't find a way to salvage the old unbootable SD card, I
installed freedombox-testing-free_2017-02-02_all-amd64.img on a new
32GB SD card. Plugged it into a PC Engines apu1d4.
It was a nice surprise to find the option to expand the FS, but given the
recent thread about that option not w
Hi,
This problem goes way back to the FreedomBox image generated way back then,
V 0.7 per my notes. I did get a warning while doing the dd that installed
it in the 4GB SD card. I've been upgrading it regularly since.
As the FS was getting pretty full, I was seeing this message once in a
while.
On Tue, Feb 07, 2017 at 12:41:54PM -0500, Daniel Gnoutcheff wrote:
> On 02/06/2017 11:15 PM, A. F. Cano wrote:
> > Failed to obtain certificate for domain .freedombox.rocks: Failed
> > authorization procedure. .freedombox.rocks (http-01):
> > urn:acme:error:connection ::
On Mon, Feb 06, 2017 at 11:57:45AM -0500, Daniel Gnoutcheff wrote:
> ...
>
> This may be a sign that SSL certificate verification is failing.
> Stuffing that message into DuckDuckGo found me a fellow who got the same
> error message and eventually determined that his server's certificate
> had an
On Sun, Feb 05, 2017 at 08:59:49AM +0100, permondes - sagen wrote:
> ...
> On my Android phone with DAVDroid (actually also in Evolution), I have
> to add the calendar-name, the link looks like:
>
> https://192.168.1.27/radicale///
That didn't work either.
> The trailing / was mandatory, it did
On Sat, Feb 04, 2017 at 02:30:58PM -0500, James Valleroy wrote:
> On 02/04/2017 01:52 PM, A. F. Cano wrote:
> > === Android log
> >...
> > 2017-01-28 20:33:55 2 [ui.setup.DavResourceFinder] Checking user-given URL:
> > https://192.1
Hello,
Android phone (galaxy S) with cyanogenmod and the improvements described here:
https://blog.torproject.org/blog/mission-impossible-hardening-android-security-and-privacy
At first I thought it might have been a firewall problem, but I disabled the
firewall and I still couldn't connect. W
On Wed, Jan 11, 2017 at 07:27:04AM -0500, James Valleroy wrote:
> On 01/10/2017 11:59 PM, A. F. Cano wrote:
> > On Tue, Jan 10, 2017 at 05:43:41AM -0500, James Valleroy wrote:
> >> On 01/09/2017 10:36 PM, A. F. Cano wrote:
> >>>
> >>> When I plug the
On Tue, Jan 10, 2017 at 05:43:41AM -0500, James Valleroy wrote:
> On 01/09/2017 10:36 PM, A. F. Cano wrote:
> >
> > When I plug the cdma phone into the usb interface, network manager fails
> > to set up the connection. This used to work before december 30 or so when
&g
FreedomBox stretch/sid (testing) with Plinth 0.12 on an APU1D4.
I keep trying different things and I still can't get network manager to start
ppp automatically like it used to. Furthermore there are now anomalies in
what Plinth reports.
When displaying the WAN connection, plinth reports:
Link
Hello everyone,
In the latest automatic software upgrade, I noticed that network-manager was
upgraded. I no longer can get ppp started like it did before.
I think the relevant log lines are:
Dec 31 13:12:33 fbx NetworkManager[370]: [1483207953.9875]
modem-broadband[ttyACM0]: failed to conne
On Sun, Dec 04, 2016 at 09:22:01AM +0530, Sunil Mohan Adapa wrote:
> On 12/04/2016 09:02 AM, A. F. Cano wrote:
> [...]
>
> So, try the following URL:
>
> https://fbx/radicale//Calendar.ics
Thank you!!
>
> > The FreedomBox-specific page:
> >
> > ht
FreedomBox version: testing (stretch/sid in /etc/debian_version)
Radicale is installed and passes all the tests:
Diagnostic Results
Module: radicale
TestResult
Listening on tcp4 port 5232 passed
Listening on tcp6 port 5232 passed
Access
On Thu, Nov 10, 2016 at 12:29:40PM -0500, James Valleroy wrote:
> ...
> Shaarli was removed from testing because the current packaged version
> doesn't support PHP 7.0:
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=821656
Ah... Ok.
> I have worked a bit on updating the package for Shaarli v
Earlier I wrote:
> ...
> I could swear I was able to access Shaarli before, at the url
> [1]http://fbx/shaarli/ but now I only get a blank page, both with chromium
> and
> firefox. If I click on the "shaare link" button (that's only installed in
> firefox) it calls up
>
> [2]http://fbx/sha
On Mon, Nov 07, 2016 at 07:51:30PM +0100, permondes - sagen wrote:
>...
> I have been using Bookmarks (Shaarli) from the inside network for a
> while now. I haven't noticed anything to distinguish whether it is,
> or should be (or not) accessible from the outside, so I assumed it would
> be.
>
On Sun, Nov 06, 2016 at 02:37:24PM +0100, permondes - sagen wrote:
>Hi Augustine,
>
>which service are you trying to access? E.g. Plinth cannot be accessed
>from outside of your local network, this gives error 403, but e.g. ikiwiki
Mmm... ok.
>should work.
I have been using Book
Hi,
I have tried to connect to the freedombox from the outside and I get a
403 Error: "you do not have permission..."
The Dynamic DNS Client is set up (gnudip.datasystems24.net) to a domain
under freedombox.rocks (HUGE thanks to whoever set this up!) and I do
get to the freedombox. The message i
On Tue, Sep 13, 2016 at 07:53:30AM +0530, Sunil Mohan Adapa wrote:
> ...
> > After digging into nm-settings (man nm-settings) I had to set these to
> > duplicate the ppp configuration in /etc/ppp/peers/cell:
> >
> > $ sudo nmcli con modify "ppp" cdma.username qnc
> > $ sudo nmcli con modify "ppp"
On Mon, Aug 29, 2016 at 01:08:30AM +0530, Sunil Mohan Adapa wrote:
> ...
> We need to understand if network manager has support for this kind of
> device. The best way check is to plug the device into a desktop system
> and get it working with network manager. Network manager community
> might he
On Sat, Aug 27, 2016 at 09:05:58AM -0400, James Valleroy wrote:
> Hi all,
>
> Plinth v0.10.0 has been released, and is now available in Debian testing.
Thank you!
> For those running v0.9, if "Automatic Upgrades" are enabled in Plinth,
> then it should be upgraded soon (or may have already).
I
I'm currently starting ppp manually. I have to run "sudo pon cell" from ssh
and this usually requires entering the sudo password. Unfortunately, I get
disconnected with "LCP terminated by peer" at random times and each time I
have to restart manually. Of course each time I get a different IP ad
On Wed, Jul 13, 2016 at 07:02:13PM +0530, Sunil Mohan Adapa wrote:
>...
> I am looking for feedback from tests creating mesh networks and joining
> existing ones. Let me know if any get a chance to test this.
There isn't one around here (that I'm aware of), but I'd love to set one
up. Anyone on
On Wed, Jun 29, 2016 at 11:36:22AM -0400, Daniel Gnoutcheff wrote:
> On 06/28/2016 08:59 PM, A. F. Cano wrote:
> > I have noticed that if privoxy is enabled, when doing an apt download from
> > internal machines, if it fails, aptitude retries but starts at the
> > beginning
On Wed, Jun 29, 2016 at 08:11:28PM -0500, Nick Daly wrote:
> A. F. Cano writes:
>
> > I've just imported 1000+ links from firefox into Shaarli on the
> > freedombox from firefox ...all the [comma separated multi-word] tags
> > had been broken up into single words.
Hello everyone,
I've just imported 1000+ links from firefox into Shaarli on the
freedombox. From firefox:
Bookmarks->Show all Bookmarks->import and Backup->
Export Bookmarks to HTML
And then from Shaarli:
Tools->Import->File selection
The import went well, but the web browser page remained b
Hello again,
I have noticed that if privoxy is enabled, when doing an apt download from
internal machines, if it fails, aptitude retries but starts at the
beginning again. With privoxy disabled, the restart works correctly,
from the last position up to which the file was downloaded. This is
real
Hello again,
Earlier (On Sat, May 14, 2016 at 01:38:18PM -0400) I wrote:
> ...
>
> On the freedombox:
>
> $ sudo netstat -anp | egrep :53
> udp0 0 0.0.0.0:53530.0.0.0:*
> 354/avahi-daemon: r
> udp6 0 0 :::5353 :::*
Hi everyone,
This used to work just fine when the ubiquiti router was connected directly
to the internal network. All I needed to do was:
route add default gw
at the internal machines.
Now:
route add default gw fbx <- the name of the freedombox on the internal net
is not sufficient.
nsloo
On Tue, Apr 26, 2016 at 11:58:18PM -0400, A. F. Cano wrote:
> On Tue, Feb 16, 2016 at 11:41:37PM +0530, Sunil Mohan Adapa wrote:
> > ...
> > 2) When you connect a USB tethered phone it will show us as an Ethernet
> > device. Which you can configure as 'external&
On Tue, Feb 16, 2016 at 11:41:37PM +0530, Sunil Mohan Adapa wrote:
> ...
> 2) When you connect a USB tethered phone it will show us as an Ethernet
> device. Which you can configure as 'external' connection in Plinth. If
Mmm... No such luck. The only interfaces visible to plinth are the 3
usual
On Tue, Feb 16, 2016 at 11:41:37PM +0530, Sunil Mohan Adapa wrote:
Thanks for replying. I can't believe it's been a month since my
original message. I finally have some more details, and some progress.
> On 02/13/2016 08:40 AM, A. F. Cano wrote:
> >
> > I just instal
I just installed the latest freedombox image on a 4GB SD card:
dd bs=1M if=freedombox-unstable-free_2015-12-13_all-amd64.img of=/dev/sde
conv=fdatasync
dd: writing `/dev/sde': No space left on device
3797+0 records in
3796+0 records out
3980394496 bytes (4.0 GB) copied, 180.22 s, 22.1 MB/s
I pu
On Fri, Apr 04, 2014 at 07:16:49AM -0500, James Valleroy wrote:
> On Mon, Mar 24, 2014 at 12:49 PM, Sunil Mohan wrote:
> > ...
> > It would be nice to have all this documented.
>
> I added a "Network Configuration" section to the VirtualBoxImages page
> on the wiki [0]. This setup will be similar
On Mon, Mar 24, 2014 at 11:19:55PM +0530, Sunil Mohan wrote:
> On Monday 24 March 2014 06:50 AM, A. F. Cano wrote:
> [...]
>
> > Now, about the problems:
> >
> > I suppose I should have asked: How do I access plinth when the fbx is
> > running in a virtualbox?
&
On Wed, Mar 19, 2014 at 07:08:28AM +0100, Petter Reinholdtsen wrote:
> ...
> > I can login as root and fbx, but I suspect this is not normal
> > behavior. How do I access plinth?
>
> You can access it by visiting http://10.0.2.15/plinth/ > with
> your browser. :)
NOTE: I've left some of the dead
On Tue, Mar 18, 2014 at 06:32:46AM +0100, Petter Reinholdtsen wrote:
> ...
> I uploaded a new freedombox-setup with new tests yesterday, with the
> tor test and updated plinth test. The plinth test fail because the
> certificate is self signed. I changed it to skip the certificate
> check.
Just
On Mon, Mar 17, 2014 at 10:29:45AM +0100, Petter Reinholdtsen wrote:
> The Freedombox got a test suite to check if servers and services are
> working as they should. The code is in the freedombox-setup package,
> located in /usr/lib/freedombox/testsuite. To test your installation,
> log in as roo
On Sun, Mar 16, 2014 at 02:50:12AM -0600, Bdale Garbee wrote:
> ...
> Petter pointed to my repository, but I hadn't pushed things there
> yet... and didn't until nearly a day after his post. So if you pulled
> quickly after his email, you were indeed working with very old bits.
That must have bee
On Sat, Mar 15, 2014 at 04:59:17PM +0100, Petter Reinholdtsen wrote:
> [A. F. Cano]
> > Ran the vboxmanage convertdd command manually
> > (outside the Makefile) and it worked. This surprised me as the
> > "convertdd" argument is not documented. In the man page th
On Fri, Mar 14, 2014 at 09:47:09AM +0530, Sunil Mohan Adapa wrote:
> ...
> problem. Please try this fix. You can either install the vmdebootstrap
> from latest git or simply modify the kpartx line in
> /usr/sbin/vmdebootstrap to contain "kpartx -avs" instead of "kpartx
> - -av". See the patch in th
On Wed, Mar 12, 2014 at 09:22:49PM -0500, Nick Daly wrote:
> "A. F. Cano" writes:
>
> > Tried to build for virtualbox. It failed. The loop device the script
> > assumes doesn't exist on Debian Jessie.
> >
> > ERROR: command failed: ['mkfs'
On Tue, Mar 11, 2014 at 11:04:01PM +0100, Petter Reinholdtsen wrote:
> ...
> To test it, fetch the git source of freedom-maker and build the image
> you want:
>
> git clone http://anonscm.debian.org/git/freedombox/freedom-maker.git
> freedom-maker
> make -C freedom-maker dreamplug-image raspb
This interesting article tells what some communities have gone through
in order to have a network infrastructure independent of the big
oligopolistic/monopolistic ISPs:
http://www.mintpress.net/the-little-city-that-could-how-small-communities-stood-up-against-telecom-corporations-and-won/
If noth
On Thu, May 24, 2012 at 09:56:35PM -0400, thinkmo...@hushmail.com wrote:
>Hi Nick,
>I'm not as technically adept as you guys, so I hope I am not on the wrong
>wavelength, but I will try to answer your question.
>I want basically what James Vasile on the website said. I want to use
>
By now probably everyone here knows about the preemptive cell phone service
shutdowns that occurred before the BART occupation that didn't happen.
Now the FCC is getting into this:
http://pjmedia.com/instapundit/138248/
Comments are being requested, but the ultimate solution is to NOT
depend on
60 matches
Mail list logo
