tended (AT/286/386) Memory, von BIOS berichtet.
5 435k Bytes XMS 3.50 (3.52) Speicher: 5 436k belegt + 65 535k frei.
DOS in HMA.
Richard
From: Eric Auer
Sent: Monday, 21 February 2022 5:52 AM
To: freedos-devel@lists.sourceforge.net
Subject:
Hi Richard,
as you are interested in having extremely large RAMDISKs:
https://github.com/Baron-von-Riedesel/HimemSX
might be interesting for you, because it can use RAM
beyond the first 4 GB. Normal HIMEM versions can only
use your first 4 GB, and between a few 100 MB and more
than a gigabyte
little smarter" as per your
suggestion (thanks for the tip).
Richard
From: Eric Auer
Sent: Thursday, 17 February 2022 7:43 PM
To: freedos-devel@lists.sourceforge.net
Subject: Re: [Freedos-devel] RAMdrive install problem (on bare metal)
Hi!
> SHELLHIGH = \FREEDOS\BIN\COMMAND.CO
Hi!
SHELLHIGH = \FREEDOS\BIN\COMMAND.COM ...
devicehigh=srdxms.sys
If you have not EMM386-style driver loaded,
then you should not use ...HIGH style commands.
Also, you write that autoexec uses
C:\FREEDOS\BIN\srdisk E:8192 /s=256 (using % notation for C:\FREEDOS)
So I expect this "s
Hi,
First, if you load the driver in the FDCONFIG.SYS you need to provide the full
path to the driver. If you remove the line you have added to that file, then
you can simply add this to the end of the FDAUTO.BAT or even create a separate
batch file to only start the RAM disk when needed.
( as
I am new to FreeDOS and trying to convert over to RC5 from a bare metal USB
BOOT disk that does not use any FreeDOS material.
With my old setup, I successfully created two RAM drives (D:\ and E:\) of
approximately 1.3 G Byte and 128 M Byte respectively. The C:\ drive was just
the USB stick itse