When DSC is enabled in DT, we need to configure the encoder for DSC
configuration, calculate DSC parameters for the given timing.
This patch adds that support by adding dpu_encoder_prep_dsc() which is
invoked when DSC is enabled in DT
Signed-off-by: Vinod Koul <vk...@kernel.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 190 +++++++++++++++++++-
1 file changed, 189 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 8d942052db8a..18cb1274a8bb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -21,12 +21,17 @@
#include "dpu_hw_intf.h"
#include "dpu_hw_ctl.h"
#include "dpu_hw_dspp.h"
+#include "dpu_hw_dsc.h"
#include "dpu_formats.h"
#include "dpu_encoder_phys.h"
#include "dpu_crtc.h"
#include "dpu_trace.h"
#include "dpu_core_irq.h"
+#define DSC_MODE_SPLIT_PANEL BIT(0)
+#define DSC_MODE_MULTIPLEX BIT(1)
+#define DSC_MODE_VIDEO BIT(2)
+
#define DPU_DEBUG_ENC(e, fmt, ...) DPU_DEBUG("enc%d " fmt,\
(e) ? (e)->base.base.id : -1, ##__VA_ARGS__)
@@ -135,6 +140,7 @@ enum dpu_enc_rc_states {
* @cur_slave: As above but for the slave encoder.
* @hw_pp: Handle to the pingpong blocks used for the display. No.
* pingpong blocks can be different than num_phys_encs.
+ * @hw_dsc Handle to the DSC blocks used for the display.
* @intfs_swapped: Whether or not the phys_enc interfaces have been swapped
* for partial update right-only cases, such as pingpong
* split where virtual pingpong does not generate IRQs
@@ -180,6 +186,7 @@ struct dpu_encoder_virt {
struct dpu_encoder_phys *cur_master;
struct dpu_encoder_phys *cur_slave;
struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
+ struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
bool intfs_swapped;
@@ -566,6 +573,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
struct drm_display_mode *mode)
{
struct msm_display_topology topology = {0};
+ struct drm_encoder *drm_enc;
+ struct msm_drm_private *priv;
int i, intf_count = 0;
for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
@@ -1008,7 +1017,8 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder
*drm_enc,
struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
- int num_lm, num_ctl, num_pp;
+ struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC];
+ int num_lm, num_ctl, num_pp, num_dsc;
int i, j;
if (!drm_enc) {
@@ -1061,11 +1071,16 @@ static void dpu_encoder_virt_mode_set(struct
drm_encoder *drm_enc,
dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
drm_enc->base.id, DPU_HW_BLK_DSPP, hw_dspp,
ARRAY_SIZE(hw_dspp));
+ num_dsc = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
+ drm_enc->base.id, DPU_HW_BLK_DSC, hw_dsc, ARRAY_SIZE(hw_dsc));
for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i])
: NULL;
+ for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
+ dpu_enc->hw_dsc[i] = i < num_dsc ? to_dpu_hw_dsc(hw_dsc[i]) :
NULL;
+
cstate = to_dpu_crtc_state(drm_crtc->state);
for (i = 0; i < num_lm; i++) {
@@ -1810,10 +1825,179 @@ static void
dpu_encoder_vsync_event_work_handler(struct kthread_work *work)
nsecs_to_jiffies(ktime_to_ns(wakeup_time)));
}
+static int dpu_encoder_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
+ int pic_width, int pic_height)
+{
+ if (!dsc || !pic_width || !pic_height) {
+ DPU_ERROR("invalid input: pic_width=%d pic_height=%d\n",
+ pic_width, pic_height);
+ return -EINVAL;
+ }
+
+ if ((pic_width % dsc->drm.slice_width) || (pic_height %
dsc->drm.slice_height)) {
+ DPU_ERROR("pic_dim=%dx%d has to be multiple of slice=%dx%d\n",
+ pic_width, pic_height, dsc->drm.slice_width,
dsc->drm.slice_height);
+ return -EINVAL;
+ }
+
+ dsc->drm.pic_width = pic_width;
+ dsc->drm.pic_height = pic_height;
+
+ return 0;
+}
+
+static void
+dpu_encoder_dsc_pclk_param_calc(struct msm_display_dsc_config *dsc, u32 width)
+{
+ int slice_per_pkt, slice_per_intf;
+ int bytes_in_slice, total_bytes_per_intf;
+
+ if (!dsc || !dsc->drm.slice_width || !dsc->slice_per_pkt) {
+ DPU_ERROR("Invalid DSC/slices\n");
+ return;
+ }
+
+ slice_per_pkt = dsc->slice_per_pkt;
+ slice_per_intf = DIV_ROUND_UP(width, dsc->drm.slice_width);
+
+ /*
+ * If slice_per_pkt is greater than slice_per_intf then default to 1.
+ * This can happen during partial update.
+ */
+ if (slice_per_pkt > slice_per_intf)
+ slice_per_pkt = 1;
+
+ bytes_in_slice = DIV_ROUND_UP(dsc->drm.slice_width *
+ dsc->drm.bits_per_pixel, 8);
+ total_bytes_per_intf = bytes_in_slice * slice_per_intf;
+
+ dsc->eol_byte_num = total_bytes_per_intf % 3;
+ dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3);
+ dsc->bytes_in_slice = bytes_in_slice;
+ dsc->bytes_per_pkt = bytes_in_slice * slice_per_pkt;
+ dsc->pkt_per_line = slice_per_intf / slice_per_pkt;
+}
+
+static void
+dpu_encoder_dsc_initial_line_calc(struct msm_display_dsc_config *dsc,
+ u32 enc_ip_width)
+{
+ int ssm_delay, total_pixels, soft_slice_per_enc;
+
+ soft_slice_per_enc = enc_ip_width / dsc->drm.slice_width;
+
+ /*
+ * minimum number of initial line pixels is a sum of:
+ * 1. sub-stream multiplexer delay (83 groups for 8bpc,
+ * 91 for 10 bpc) * 3
+ * 2. for two soft slice cases, add extra sub-stream multiplexer * 3
+ * 3. the initial xmit delay
+ * 4. total pipeline delay through the "lock step" of encoder (47)
+ * 5. 6 additional pixels as the output of the rate buffer is
+ * 48 bits wide
+ */
+ ssm_delay = ((dsc->drm.bits_per_component < 10) ? 84 : 92);
+ total_pixels = ssm_delay * 3 + dsc->drm.initial_xmit_delay + 47;
+ if (soft_slice_per_enc > 1)
+ total_pixels += (ssm_delay * 3);
+ dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->drm.slice_width);
+}
+
+static bool
+dpu_encoder_dsc_ich_reset_override_needed(struct msm_display_dsc_config *dsc,
bool pu_en)
+{
+ /* As per the DSC spec, ICH_RESET can be either end of the slice line
+ * or at the end of the slice. HW internally generates ich_reset at
+ * end of the slice line if DSC_MERGE is used or encoder has two
+ * soft slices. However, if encoder has only 1 soft slice and DSC_MERGE
+ * is not used then it will generate ich_reset at the end of slice.
+ *
+ * Now as per the spec, during one PPS session, position where
+ * ich_reset is generated should not change. Now if full-screen frame
+ * has more than 1 soft slice then HW will automatically generate
+ * ich_reset at the end of slice_line. But for the same panel, if
+ * partial frame is enabled and only 1 encoder is used with 1 slice,
+ * then HW will generate ich_reset at end of the slice. This is a
+ * mismatch. Prevent this by overriding HW's decision.
+ */
+ return pu_en && dsc && (dsc->drm.slice_count > 1) &&
+ (dsc->drm.slice_width == dsc->drm.pic_width);
+}
+
+static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc *hw_dsc,
+ struct dpu_hw_pingpong *hw_pp,
+ struct msm_display_dsc_config *dsc,
+ u32 common_mode, bool ich_reset)
+{
+ if (hw_dsc->ops.dsc_config)
+ hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode, ich_reset);
+
+ if (hw_dsc->ops.dsc_config_thresh)
+ hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc);
+
+ if (hw_pp->ops.setup_dsc)
+ hw_pp->ops.setup_dsc(hw_pp);
+
+ if (hw_pp->ops.enable_dsc)
+ hw_pp->ops.enable_dsc(hw_pp);
+}
+
+static void dpu_encoder_prep_dsc(struct dpu_encoder_virt *dpu_enc,
+ struct msm_display_dsc_config *dsc)
+{
+ /* coding only for 2LM, 2enc, 1 dsc config */
+ struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
+ struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
+ struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
+ int this_frame_slices;
+ int intf_ip_w, enc_ip_w;
+ int ich_res, dsc_common_mode;
+ int pic_width, pic_height;
+ int i;
+
+ for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
+ hw_pp[i] = dpu_enc->hw_pp[i];
+ hw_dsc[i] = dpu_enc->hw_dsc[i];
+
+ if (!hw_pp[i] || !hw_dsc[i]) {
+ DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n");
+ return;
+ }
+ }
+
+ dsc_common_mode = 0;
+ pic_width = dsc->drm.pic_width;
+ pic_height = dsc->drm.pic_height;
+
+ dpu_encoder_dsc_update_pic_dim(dsc, pic_width, pic_height);
+
+ dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
+ if (enc_master->intf_mode == INTF_MODE_VIDEO)
+ dsc_common_mode |= DSC_MODE_VIDEO;
+
+ this_frame_slices = pic_width / dsc->drm.slice_width;
+ intf_ip_w = this_frame_slices * dsc->drm.slice_width;
+
+ dpu_encoder_dsc_pclk_param_calc(dsc, intf_ip_w);
+
+ /*
+ * dsc merge case: when using 2 encoders for the same stream,
+ * no. of slices need to be same on both the encoders.
+ */
+ enc_ip_w = intf_ip_w / 2;
+ dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w);
+
+ ich_res = dpu_encoder_dsc_ich_reset_override_needed(dsc, false);
+
+ for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
+ dpu_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], dsc,
dsc_common_mode, ich_res);
+}
+
void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc)
{
struct dpu_encoder_virt *dpu_enc;
struct dpu_encoder_phys *phys;
+ struct msm_drm_private *priv;
bool needs_hw_reset = false;
unsigned int i;
@@ -1841,6 +2025,10 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder
*drm_enc)
dpu_encoder_helper_hw_reset(dpu_enc->phys_encs[i]);
}
}
+
+ priv = drm_enc->dev->dev_private;
+ if (priv->dsc)
+ dpu_encoder_prep_dsc(dpu_enc, priv->dsc);
}
void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
--
2.26.3
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
