RE: malformed EAPOL-Key with LEAP and AEGIS Client

Hi Artur, Thanks for the info about the EAPOL packets. I've installed the latest drivers both for the AP and the pcmcia card. It seems that the AP340 has a bug(?:( Is there any website of Cisco where I can post my question? Thanks, Marios -Original Message- From: [EMAIL PROTECTED]

RE: malformed EAPOL-Key with LEAP and AEGIS Client

Artur, Have you checked if the last EAPOL-Key is malformed. It works fine for me too even if the packet is not correct !! I tried to pass traffic with WEP enabled and I didn't have any problem, but I don't know if this packet should be malformed anyway!! Could you please try to pass traffic using

malformed EAPOL-Key with LEAP and AEGIS Client

Hi All, I'm using WEP enabled mode where I get 2 EAPOL-Keys with the second malformed from the AP-340 !!! I use also AEGIS client in Windows XP Home. I've attached the ethereal dumps to check what exactly I mean. I don't know if it is a bug in the AP or the freeradius, but I suspect that the

RE: authenticating directly from NT domain controller

Alan, Could you please give us a starting point? I just compiled the rlm_smb. Is there any radiusd.conf file? Thanks, Marios -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Wednesday, October 29, 2003 7:20 PM To: [EMAIL PROTECTED]

RE: authenticating directly from NT domain controller

Sorry Alan, I found one after the build --with-experimental-modules=yes. Thanks, Marios -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marios Karagiannopoulos Sent: Wednesday, October 29, 2003 7:37 PM To: [EMAIL PROTECTED] Subject: RE: authenticating

RE: authenticating directly from NT domain controller

:[EMAIL PROTECTED] On Behalf Of Marios Karagiannopoulos Sent: Wednesday, October 29, 2003 7:37 PM To: [EMAIL PROTECTED] Subject: RE: authenticating directly from NT domain controller Alan, Could you please give us a starting point? I just compiled the rlm_smb. Is there any radiusd.conf file? Thanks

RE: authenticating directly from NT domain controller

Marios Karagiannopoulos [EMAIL PROTECTED] wrote: I just tried to be authenticated from open1x client. I got the following: rlm_smb: Attribute User-Password is required for authentication. rlm_smb can only do PAP. I don't think you said you were doing wireless authentication... Alan DeKok

etc_smbpasswd !!

Title: Message Alan, Alternatively, I'm trying to wireless authenticate through MS-CHAPV2 and etc_smbpasswd. I dumped the password from Domain Controller to a file /etc/smbpasswd but unfortunately I'mgetting rejected !! auth: type "MS-CHAP"modcall: entering group Auth-Type for request 1

RE: authenticating directly from NT domain controller

- MSCHAPv2 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Wednesday, October 29, 2003 8:58 PM To: [EMAIL PROTECTED] Subject: Re: authenticating directly from NT domain controller Marios Karagiannopoulos [EMAIL PROTECTED] wrote: Right

RE: etc_smbpasswd !!

, Marios -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Wednesday, October 29, 2003 9:08 PM To: [EMAIL PROTECTED] Subject: Re: etc_smbpasswd !! Marios Karagiannopoulos [EMAIL PROTECTED] wrote: Alternatively, I'm trying to wireless

RE: PEAP and LDAP doesn't authenticate

: Tuesday, October 28, 2003 7:38 PM To: [EMAIL PROTECTED] Subject: Re: PEAP and LDAP doesn't authenticate Marios Karagiannopoulos [EMAIL PROTECTED] wrote: I don't understand at all what's going on. I would appreciate it If you could give me a tip. The password is wrong. Alan DeKok. - List

PEAP and LDAP doesn't authenticate

Hi guys, Could you please check my radiusd -X -A below? I'm trying to authenticate a Windows XP supplicant (PEAP) through an 802.1X SMC AP (10.1.0.180) and freeradius from the latest nightly build ! The LDAP server is an Active Directory Server (Windows 2003 Server). Please keep in mind that