> modules {
>
> ippool wpool {
> session-db = ${raddbdir}/wpool-sess-db
> ip-index = ${raddbdir}/wpool-idx-db
> range-start = 192.168.127.1
> range-stop = 192.168.127.127
> netmask = 255.255.255.255
>
>> Here the question: is there a way to receive some parameter from the
>> LDAP server to pass back to radius ( not to Cisco 3015 ) to activate
>> the rlm_ippool module ?
>
> radiusCheckItem: Pool-Name := pool1
While waiting on thi info I' ve also found that you can modify the
ldap.attrmap adding
for them.
Here the question: is there a way to receive some parameter from the LDAP
server to pass back to radius ( not to Cisco 3015 ) to activate the
rlm_ippool module ?
The docs about ldap module aren't very easy to understand for me.
Hope it is clear enoug, as my english is very
> It was fixed today. Check the CVS. It needed a memset(0) for key.nas
> before the strcpy().
>
I can confirm that now it works.
Thanx alot
Pigi
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Do you remember my previuos mails ?
> Hi all,
> I' m having problem with the Ippool module ( rlm_ippool ).
> When authorizing, the module is able to allocate the correct IP
> address, but on the account "Stop" does not set the ip free.
...
Well, I did some more investigation, but yet doesn't work.
Ok, I reply to my self.
I' ve noticed that the NAS ( a VPN 3000 Concentrator ) sends out two
different authorize request, on two different ports ( 1020 and 1038 in my
trace ) then when gives out a stop request will use the second request
parameters.
The rlm_ippoll module, correctly check for the se
Hi all,
I' m having problem with the Ippool module ( rlm_ippool ).
When authorizing, the module is able to allocate the correct IP address, but
on the account "Stop" does not set the ip free.
relevant part of radiusd.conf
...
...
modules {
...
...
ippool Prova0 {
range-st
> Hi,
>
> I want to use ippool module (freeradius version 0.7 stable). I have
> tried the following configure commands but unfortunately didn't work:
> ./configure . --with-rlm_ippool
> ./configure . --enable-rlm_ippool
> I looked in configure, make messages but I didn't see anything wron
ippool_problem.May_this_be_a_good_fix
>> "Pierluigi Frullani" <[EMAIL PROTECTED]> wrote:
>> > Looking in the code I think I' ve found a "bug" that I fixed this
>> > way:
>> ...
>> > Brief, when entering in this lines, if t
Hi all,
I need some hints for a configuration.
I've read trough the docs but maybe for my "stupidity" I' m unable to
realize a particular configuration.
What I need to realize is an authentication scheme based on username for
access and particular value pair attribute,and on a group for other
att
Hi all,
I'm trying to configure a radius server ( freeradius 0.6 ) where I would
liketo receive the IP-Address from a pool.
To achieve this I would like to "join" some of the users in groups, by using
the following authentication "user":
steve@Gruppo
where the user steve has some return pair, bu
11 matches
Mail list logo