Yes,
I agree with you, the problem comes from My AP.
Thank you for these precisions
I am actually contacting Intel and I 'll share with you feedback.
Anyway If anybody have some tips and feedback about using Intel Pro
Wirelless 5000
Alan DeKok wrote:
I'm willing to change the code in
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
> I think I have some misgonfiguration but, to my point of view it comes
> from free-redius configuration .
I doubt that very much.
> Freeradius :
> 1. AP -> freeradius ACCESS REQUEST (1) : EAP message type iddentity
>2. freeradius -> AP
Alan DeKok wrote:
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
Sorry, me again .
I think I have some misgonfiguration but, to my point of view it comes
from free-redius configuration .
But I haven't found were...
I check dialog differences between Freeradius and IAS in my case using
ethere
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
> So,
> is the misconfiguration is due to the fact that my clients are MS type
> (Windows 2000 and XP) and not the radius server nor my certificates are
> wrong ?
No. As I said, the problem is that the AP is receiving an
Access-Challenge packet from
Alan DeKok wrote:
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
You've managed to convince the server to send packets to itself.
That's quite a feat.
No 192.168.6.73 is my AP ..
So sorry, It's my duty fault , it my client throught the AP .
Then the AP is bouncing the Access-Chall
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
> > You've managed to convince the server to send packets to itself.
> >That's quite a feat.
>
> No 192.168.6.73 is my AP ..
Then the AP is bouncing the Access-Challenge packet back to
the server.
The AP SHOULD NOT be sending Access-Challenges to
Alan DeKok wrote:
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
after generating and installing freeradius, generating and installing
certificates on server and client , I tried to initiate an EAP/TLS
negociation but negocation failed after the 2nd frame :
"rad_recv: Access-Challenge packet
Fabrice Beauvir <[EMAIL PROTECTED]> wrote:
>after generating and installing freeradius, generating and installing
> certificates on server and client , I tried to initiate an EAP/TLS
> negociation but negocation failed after the 2nd frame :
>
> "rad_recv: Access-Challenge packet from host
Hi all ,
my eap module authentication doesn't seem to work properly.
1st of all here is my configuration :
- AP : INTEL *PRO/Wireless 5000 LAN Access Point*
*** - Radius server :
Linux Mandrake 9.1 Beta with :
Openssl (and openssl-develop) : 0.9.7a-1.1
Freeradius : 0.9.0
