kathiresan j <[EMAIL PROTECTED]> wrote:
> I am running free radius 1.6.4
No, you're not. Cistron Radiusd is at version 1.6.4. FreeRADIUS is
at version 0.4.
> Now i want to restrict access through a
> particular phone number (Calling-Station-Id)?? I have given the following
> entry in /etc/r
Thanks Lewey for your reply
I configuration on my router is exactly the same as given in
/installsource/doc..but still the problem persists
Is thery any way i can find out if my Cisco 2621 is really sending the
calling-station-id ..
I am usig a 16 port analog modem card in my cisco 2621 for the
On Mon, 24 Dec 2001, kathiresan j wrote:
> I am usig a 16 port analog modem card in my cisco 2621 for the incoming calls
In this case you must not answer the telephone line until the end of the
second ring so that the caller ID information can be sent.
To see if your NAS is sending the appropra
Also you have to make sure your NAS is not picking up the line before ANI
is sent.
Just my $0.02,
Jeremy McNamara
On Mon, 24 Dec 2001, kathiresan j wrote:
>
>
> HI..
>
> I am running free radius 1.6.4 on Red Hat Linux which gets authentication
> requests from Cisco Ras 2621.Now i want to
> what else should I configure in the Cisco router
Check /installsource/doc there is a cisco config example.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html