ent: Friday, April 12, 2002 8:25 AM
Subject: Re: freeradius and mysql accounting and use of called-station-id
>
> Hello,
>
> if you make debugging in radius server and in Cisco ('debug
> radius' :), you should find, that Cisco doesn't send this attribute in the
>
From: Thomas Jalsovsky [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 12, 2002 1:25 PM
To: [EMAIL PROTECTED]
Subject: Re: freeradius and mysql accounting and use of
called-station-id
Hello,
if you make debugging in radius server and in Cisco ('debug
radius' :), you should find
> Acct-Session-Time = 13
> X-Ascend-Data-Rate = 64000
> X-Ascend-Xmit-Rate = 64000
> X-Ascend-Multilink-ID = 14165
> Acct-Delay-Time = 0
> Client-IP-Address = 192.168.1.41
> Timestamp = 1018533274
>
> Thanks Dirk
>
> -----
"Dirk Tanneberger" <[EMAIL PROTECTED]> wrote:
> I think the Cisco AS5300 send not these values.
> But how can I configure AS5300 to send the parameters?
Read your Cisco manual, or talk to your Cisco support person.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.o
-
From: "Chris Parker" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 11, 2002 5:27 PM
Subject: Re: freeradius and mysql accounting and use of called-station-id
> At 05:09 PM 4/11/2002 +0200, Dirk Tanneberger wrote:
> >Hello all,
> >
At 05:09 PM 4/11/2002 +0200, Dirk Tanneberger wrote:
>Hello all,
>
>I use freeradius 0.5 and my NAS is a Cisco AS5300.
>I test with freeradius and mysql since 2 weeks and I have 2 problems:
>
>The radius server writes the accounting records in the mysql-table, but
>the following entries leave blan
