Re: next

Hi, So far I haved followed instructions in the admin.sql file and the used the command: mysql -uroot -prootpass radius schema.sql which creates a database called radius, that I am suppose to fill with some dummy data, is this right so far? I also uncommented the line- $INCLUDE sql.conf,

Accounting responce question.

Hello there, i have posted here few times and got very helpfull answers, so i desided to try my luck once more. Im using FreeRADIUS Version 2.0.4(slackware+postgre) on powerfull x86 server with alot of RAM, connected with gigabit to NAS. Load is about 5-15record/sec Once in a while we get

Re: Windows XP SP2 and SP3 EAP problem followup

You don't see a pattern - Lynksys works, Intel - doesn't. You can put your effort into debugging Intel's problems and solving this for them. Or you can buy a card that works. Take your pick. Ivan Kalik Kalik Informatika ISP Other notebook type is Toshiba with Intel 21xx/22xx b/g card. Balgaa

Re: Windows XP SP2 and SP3 EAP problem followup

I run Freeradius with radiusd -X then captured logging information and sent in previous email. Is it possible to get some point from this logging information or need other way? I will try other card for testing. You have established this: Linksys card + laptop + freeradius = working

Re: Windows XP SP2 and SP3 EAP problem followup

BTW, I read Freeradius config there several type of authentication. 1.EAP with PEAP/MSCHAPv2 username/password 2.EAP with TLS. I little confuse configuration difference between above two type. Both are configured in the default configuration. Just don't change anything. EAP-TLS will use

rc

Does freeradius come with a rc. startup file.Im am using slackware version 12.1. thanks jon - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

firewall

Does your freeradius server have to have a rc.firewall? If so does freeradius come with a script for one? jon - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: next

On Thu, May 28, 2009 at 2:04 AM, a.l.m.bu...@lboro.ac.uk wrote: Hi, So far I haved followed instructions in the admin.sql file and the used the command: mysql -uroot -prootpass radius schema.sql which creates a database called radius, that I am suppose to fill with some dummy data,

Re: Windows XP SP2 and SP3 EAP problem followup

Ivan, Thank you very much your support. I will test other card and latest firmware. Today, I installed newest version driver for my Lenovo Thinkpad X60, Intel 3945abg card. I will test it tomorrow, get back to you. Balgaa - Original Message - From: Ivan Kalik t...@kalik.net To:

Re: next

now...have you edited sql.conf and the underlying config files eg ql/mysql/dialup.conf? I edited sql.conf file but I didn't do anything to the dialup.conf file, why should I have, more reading now! There is no dire need. There are things you need to edit if you want to use

Re: firewall

Does your freeradius server have to have a rc.firewall? No. Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: question about session resumption and reply attributes

On 21/5/09 15:05, Alan DeKok wrote: Arran Cudbard-Bell wrote: Yes, so have it tell the outer server... Insert the (attached) snippet into the authorize section of the inner server. $ git format-patch ? It's on my to do list. You may find things getting jiggled around to a more sane

rlm_raw not included in compile

Hi all, I am trying to use the rlm_raw module to test a piece of code. I downloaded freeradius-2.1.7-pre Googling for the rlm_raw module found the module for me on a message somewhere in 2005. I extracted it from the message and dropped it in the modules folder. It does not seem to compile

Re: rc

Does freeradius come with a rc. startup file.Im am using slackware version 12.1. No, but there is nothing to it. Just add radiusd (probably /usr/local/sbin/radiusd) to startup script (probably /etc/rc.d/rc.local). It should be after mysql or ldap if you are using them. Ivan Kalik Kalik

Re: Not doing Peap/ttls

Help please and sorry for the long post. Quick description of the problem: New build Freeradius 2.1.4/5 on solaris x86 vmware. Client is a laptop running windows XP through a cisco switch configured for 802.1x. Will not do peap. Reconfigure the switch to use a different freeradius server

freeRADIUS first test with PostgreSQL?

I am ready to test my first freeRADIUS server with PostgreSQK backend. He is my setup: freeRADIUS Server: -CentOS 5.3 -freeRADIUS V# 2.1.6 (RPM install) -PostgreSQL V# 8.3.7 (RPM install) - Client eth0: Connect to the Internet eth1: Connected to the backend server thru a hub Backend Server:

Re: freeRADIUS first test with PostgreSQL?

I need to add a couple of USER/PW into the PostgreSQL tables to test. How do I do that? Is there a GUI to add UID/PW? Are UID/PW added manually? Where can read about it? http://wiki.freeradius.org/SQL_HOWTO#Populating_SQL You have dialup admin included with the server. daloRadius is a good

Re: rc

don't forget to enter full path to radiusd. Just like Ivan wrote... You can check this with # locate radiusd or # whereis radiusd Ivan Kalik wrote: Does freeradius come with a rc. startup file.Im am using slackware version 12.1. No, but there is nothing to it. Just add radiusd

Reading material!

1. Is there any written description of all the tables, columns, etc. What they are? What data goes in them? How when they are created? 2. PostgreSQL/freeRADIUS: Where are the accounting tables? Where can I read about them? How are they created? - List info/subscribe/unsubscribe? See

Access-request proxied, but accounting-request not proxied

it to the proper server: Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module preprocess returns ok for request 2 radius_xlat: '/usr/freeRadius/log/radius/radacct/172.17.7.214/auth-detail-20090528' rlm_detail: /usr/freeRadius/log

Access proxied, Accounting not proxied

it to the proper server: Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module preprocess returns ok for request 2 radius_xlat: '/usr/freeRadius/log/radius/radacct/172.17.7.214/auth-detail-20090528' rlm_detail: /usr/freeRadius/log

Re: Reading material!

Hi, 1. Is there any written description of all the tables, columns, etc. What they are? What data goes in them? How when they are created? 2. PostgreSQL/freeRADIUS: Where are the accounting tables? Where can I read about them? How are they created? in the source code tarball you'll find

Re: Access-request proxied, but accounting-request not proxied

Hi, Waking up in 2 seconds... rad_recv: Accounting-Request packet from host 172.17.7.214:32786, id=7, length=735 Received Accounting-Request packet from 172.17.7.214 with invalid signature! (Shared secret is incorrect.) Dropping packet without response. Finished request 3 examine the

Re: freeRADIUS first test with PostgreSQL?

Hi, I need to add a couple of USER/PW into the PostgreSQL tables to test. How do I do that? however you like Is there a GUI to add UID/PW? theres a basic GUI supplied as part of freeradius source - dialup_admin there is also DaloRADIUS - the author of that tool is on this list. Are

Re: Access-request proxied, but accounting-request not proxied

rlm_chap: Setting 'Auth-Type := CHAP' ... rad_recv: Accounting-Request packet from host 172.17.7.214:32786, id=7, length=735 Received Accounting-Request packet from 172.17.7.214 with invalid signature! (Shared secret is incorrect.) Dropping packet without response. Finished request 3

Re: Acct-Session-Id special characters changed to hex

Thanks alot. Apologies, should have read the documentation more carefully. Regards, Sajeewa Warnakulasuriya Systems Development Manager ispONE is a wholesale ISP built to help internet access resellers and independent ISPs to compete in the Australian marketplace through ONE Brand, ONE

new to freeradius, securing LAN

Hello All, I am very new to FreeRadius, some of users are already knew our LAN IPs ... so they can manually configure an interface on their PC and completely bypass our DHCP server.. can I solve this by using FreeRadius? I thought this can be done by checking its MAC address, so although