> I have a problem which I and a friend here have been trying to solve for
> some days now.
>
¿what is your problem?
After we have run in terminal "./configure" ; "make" & "sudo make install"
> and afterwards try to run radius with "radiusd -X" (same as freeradius -X if
> youre using freeradius i
kachin Agarwal wrote:
> Here is the complete build :
No... it's not. We've built the server often enough that we know what
the "complete" configure output looks like, and this isn't it.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Horchem Gary wrote:
> let me try to send this again the last one I sent the list server said
> it was too large I found the file and uncommented any # ldap lines I
> tried to login again and got this logging error "++[eap] returns reject
> Failed to authenticate the user.
The MAJOR problem here
Hi,
Here is the complete build :
freeradius-server-2.1.7.tar.bz2
configure: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoc...@gnu.org.
configure: WARNING: pcap
11/10/2009 06:10 AM, Horchem Gary::
let me try to send this again the last one I sent the list server said
it was too large
'freeradius -X' output shows us:
- how you configured your freeradius
- debug output
You'd better give us 'freeradius -X' output, using
something like http://pastebin.ca/
let me try to send this again the last one I sent the list server said it was
too large I found the file and uncommented any # ldap lines I tried to login
again and got this logging error "++[eap] returns reject
Failed to authenticate the user.
Login incorrect: [ghorchem/] (from client Server-3 p
> Where in the file do I enable LDAP
Same place as in default one - authorize.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Where in the file do I enable LDAP
Sent from my iPhone
On Nov 9, 2009, at 5:15 PM, t...@kalik.net wrote:
I'm still having trouble here is my sites-available default file
...
Where is your password? If it's in ldap, you haven't enabled ldap in
inner-tunnel virtual server.
Try reading the a
Hi,
>
> Hi,
> Ya i need the rlm_counter module. so how can i rectify it..? plz give me
> a solution..
>
send a little bit more of the error message - at least 15 or so lines before
the output you gave before - the system cannot find particular libraries
on your OS and therefore cannot build
> I'm still having trouble here is my sites-available default file
...
>
> Where is your password? If it's in ldap, you haven't enabled ldap in
> inner-tunnel virtual server.
Try reading the answers again. Does it say default virtual server or
something else?
Ivan Kalik
Kalik Informatika ISP
-
L
On 11/09/2009 05:05 PM, Chico Sokol wrote:
Funny, configure's output seems to be fine:
checking for pam_start in -lpam... yes
checking security/pam_appl.h usability... yes
checking security/pam_appl.h presence... yes
checking for security/pam_appl.h... yes
checking pam/pam_appl.h usability... ye
Funny, configure's output seems to be fine:
checking for pam_start in -lpam... yes
checking security/pam_appl.h usability... yes
checking security/pam_appl.h presence... yes
checking for security/pam_appl.h... yes
checking pam/pam_appl.h usability... yes
checking pam/pam_appl.h presence... yes
che
On 11/09/2009 03:54 PM, Chico Sokol wrote:
Any ideas here?
Somebody have ever built FreeRADIUS with pam module?
On Fri, Nov 6, 2009 at 5:36 PM, Chico Sokol wrote:
Did you install these *after* running configure? If so you'll have to run
configure again so it can find them>and set the right c
Any ideas here?
Somebody have ever built FreeRADIUS with pam module?
On Fri, Nov 6, 2009 at 5:36 PM, Chico Sokol wrote:
>>Did you install these *after* running configure? If so you'll have to run
>>configure again so it can find them >and set the right compiler flags.
>
> No I've ran configure
> I am trying to authenticate users via Freeradius 2.1.7 against LDAP. I
> would like to use a checkItem to determine ippool assignment to give users
> an IP address from defined pools. The LDAP portion is working correctly
> but I receive the message "Could not find Pool-Name attribute" in my
> d
> Hello i'm trying to setup Freeradius to do wireless authcation when I try
> to connect I get my peap certficte then it says "incorrect username or
> password" below is the debug output
...
> server inner-tunnel {
> +- entering group authorize {...}
> ++[chap] returns noop
> ++[mschap] returns no
kachin Agarwal wrote:
>
> Hi,
> Ya i need the rlm_counter module. so how can i rectify it..? plz
> give me a solution..
Read the REST of the messages. It tells you what the module needs,
and what is missing.
I never understand why some people look only at the LAST error
message, and ref
Hi,
Ya i need the rlm_counter module. so how can i rectify it..? plz give me a
solution..
Thanks & Regards,
Kachin
--- On Mon, 9/11/09, kachin Agarwal wrote:
From: kachin Agarwal
Subject: Cannot upgade to 2.1.7
To: freeradius-users@lists.freeradius.org
Date: Monday, 9 November, 2009, 6:0
Hi,
> I have a problem which I and a friend here have been trying to solve for some
> days now.
it wasnt clear what the actual problem is that you are having - you seemed to
miss
out the problem - eg the output of radiusd -X
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org
> --
> > View this message in context:
> > http://old.nabble.com/WLANFreeradiusOpenLDAPVLANs-tp26230857p26230857.html
> > Sent from the FreeRadius - User mailing list archive at Nabble.com.
> >
> > -
> > List info/subscribe/unsubscribe? See
> > ht
Configuration guide 3com switch 4210 family:
http://support.3com.com/documents/switches/4210/3Com_Switch4210_Configuration_Guide.pdf
Pages 223, 802.1x Configuration.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks for answering and I hope that I will have no problems in configuring
the server but I think that won't happen.
nf-vale wrote:
>
> On Monday 09 November 2009 12:25:13 José Johnny RANDRIAMAMPIONONA wrote:
>> Freeradius work well with openldap but only with cleartext password
>> (PAP).
Hi,
> My clients are in a MySQL database (nas table).
>
> ++--+---+---+-++-+---+---+
> | id | nasname | shortname | type | ports| secret | server
> | community | description
Hello, I'm using Freeradius 2.0.4-3 an Debian.
My clients are in a MySQL database (nas table).
++--+---+---+-++-+---+---+
| id | nasname | shortname | type | ports| secret | serve
On Monday 09 November 2009 12:25:13 José Johnny RANDRIAMAMPIONONA wrote:
> Freeradius work well with openldap but only with cleartext password (PAP).
> Best regards!
Don't give wrong answers if you're not sure of what you're talking.
>
> 2009/11/9 _Stefan_H
>
> > First I know my english is not
Hi,
> Hi,
> I m trying to upgrade the freeradius server to 2.1.7.
> But when i build i get the following error :
>
> configure: error: set --without-rlm_counter to disable it explicitly.
> configure: error: ./configure failed for src/modules/rlm_counter
> make: *** [*/*/*/*/*/*/*/radius/freeradiu
Hi,
I m trying to upgrade the freeradius server to 2.1.7.
But when i build i get the following error :
configure: error: set --without-rlm_counter to disable it explicitly.
configure: error: ./configure failed for src/modules/rlm_counter
make: *** [*/*/*/*/*/*/*/radius/freeradius-server-2.1.7/src
Freeradius work well with openldap but only with cleartext password (PAP).
Best regards!
2009/11/9 _Stefan_H
>
> First I know my english is not the best, but i hope you will understand it.
>
> In the course of a project i have to make an authentification against a
> freeradius server for the WLA
28 matches
Mail list logo