Hi Alan DeKok:
Are you sure it is the PEAP module,not the TTLS module? why?
And when will the 2.1.9 be released? thank you very much!
sunhualing
On Wed, Apr 14, 2010 at 10:59 AM, Alan DeKok al...@deployingradius.comwrote:
sunhualing wrote:
Hello everyone:
I am using a
sunhualing wrote:
Hi Alan DeKok:
Are you sure it is the PEAP module,not the TTLS module? why?
And when will the 2.1.9 be released? thank you very much!
They both have the same code, and they both should be fixed.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Alexander wrote:
Dear all,
after solving my 'check user traffic quota at login time' problem I try to
take the next step and disconnect active sessions if user's traffic limited
is exceeded.
My Cisco LNS supports 3GPP2 VSA attributes. Therefore I took a look at
Stefan A. wrote:
Even If I assign values to THEattributes in hints file, some later
evaluations in the default file are pretending:
Request:THEattributes not found
What does that mean?
How may I debug the processing of the hints file?
Debug mode is fine.
Starting radiusd -Xx works
Thanks very much, I wish that the version 2.1.9 will be released soon.
Sunhualing
On Wed, Apr 14, 2010 at 3:02 PM, Alan DeKok al...@deployingradius.comwrote:
sunhualing wrote:
Hi Alan DeKok:
Are you sure it is the PEAP module,not the TTLS module? why?
And when will the 2.1.9 be
HI,
I am trying to integrate FreeRadius and JRadius. I am using FreeRadius 2.1.8
and JRadius version 1.1.2
When I am running both the servers and sending any test packets to FreeRadius.
I am getting Acces-Accept at FreeRadius side but it is not forwarding Packet to
JRadius.
I am getting the
Nathan Van Fleet
Telecommunications Analyst
Network Assessment and Integration
IITS Concordia University
(514) 848-2424 Extension:5434
-Original Message-
From: freeradius-users-
bounces+nmcdavit=alcor.concordia...@lists.freeradius.org
[mailto:freeradius-users-
hi,
the error is seen with near bottom
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured. Cannot create LM-Password.
[mschap] No Cleartext-Password configured. Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for username with NT-Password
[mschap]
Hi, I did in fact have that enabled.
Should I have it disabled or enabled?
-Original Message-
From: freeradius-users-
bounces+nmcdavit=alcor.concordia...@lists.freeradius.org
[mailto:freeradius-users-
bounces+nmcdavit=alcor.concordia...@lists.freeradius.org] On Behalf Of
Alan
Here is the log for it without auto header.
Regards,
-Nathan
++- elsif (outer.NAS-IP-Address == 132.205.198.43) returns ok ...
++skipping elsif for request 30: Preceding if was taken ... skipping
++elsif for request 30: Preceding if was taken [expiration] returns
++noop [logintime] returns
Hi,
Here is the log for it without auto header.
!!!
!!!Replacing User-Password in config items with Cleartext-Password.
!!!
!!!
Hi,
I installed latest version of it and followed the steps as mentioned in the
website:
http://wiki.freeradius.org/SQL_HOWTO.
After configuring basic setup I'm facing i.e. No authenticate method
(Auth-Type) configuration found for the request: Rejecting the user
when I run radtest I'm facing
12 matches
Mail list logo