Hi everyone,
I have a doubt, it is more theoretical than practical. Can anyone tell me if the
servers used for authentication in Wi-Fi networks are always RADIUS, or are there any
other options? and in case that there are others, why is RADIUS the most common?
thanks
bfr
-
List
I'm having problems to change the user in windows xp. I tried peap the first time with
a correct user and everything was fine but now I want to do a prove with another user
but I'm not prompted anymore to intro a new one and it uses the previous one all the
time(and I have reconfigured the
- Mensaje original -
De: Michael Griego [EMAIL PROTECTED]
Fecha: Viernes, Mayo 28, 2004 2:48 pm
Asunto: Re: how to change xp client using peap
There's a Microsoft KB article on this. I can't remember the title
offhand, though. It tells you which registry entry to delete in order
to
for the basic question but I'm not able to get the prompt for my user and I'm
trying to discard any basic mistake in concepts
thanks
bfr
isn't it?
- Mensaje original -
De: BLANCA FERRERO RODRIGUEZ [EMAIL PROTECTED]
Fecha: Martes, Mayo 25, 2004 8:45 am
Asunto: Re: peap user
I'm
I'm configuring PEAP. I think the freeradius config is Ok.
...
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type Reject
rad_check_password: Auth-Type = Reject, rejecting user
Nope, it's not.
Alan DeKok.
I think that message comes
Hi,
I'm configuring PEAP. I think the freeradius config is Ok. I'm using an Aironet AP
1100 configured to support 802.1X authentication and WEP and my wireless network is
enabled to use PEAP auth.
the fact is that when I try to authenticate my card against radius I'm not asked to
enter a user
I'm trying to configure PEAP. In the snapshot I was using of freeradius 0.9.3 it
wasn't supported so I'm trying to install a newer one, but I think it doesn't
overwrite the files of the previous one because when I try to run radius it tells me
that 'peap is not a supported module'. So how can I
Could anyone tell me where the eap.cnf is supossed to be?in the raddb dir?
thanks a lot
bfr
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
usually it's called 'eap.conf' and it is in the raddb dir.
I have already searched in tha dir but I find no eap.conf!! I'm using freeradius 0.9.3
does it support PEAP?
thanks
bfr
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I have eap/tls authorization configured in my system and I would like to know if
configuring PEAP from this point would be very difficult.
Does anyone know any good HOWTO to help me with the configuration of PEAP ?
thank you
bfr
- Mensaje original -
De: Alejandro Bonilla [EMAIL
is there any way that I can control this
access of users with the users file although they have a correct
cert?
Yes. Tell the server to reject the user.
sotty to insist but could you tell me how to do this exactly?
bfr
-
List info/subscribe/unsubscribe? See
I'm tryng authentication with eap/tls. It works propertly but my doubt is: if I try to
connect with a user called 'proof' for example and it is not included in my users
file, should it be allowed to connect to the network despite having a correct
certificate? if not what am I doping wrong
I'm newbie too and I use Mdk9.2 and freeradius snapshot 22-004-
2004, then
I use slocate command to find files I need . I install all soft
neededfrom /usr/local/ and I add /usr/local/bin and
/usr/local/sbin to my $PATH
then it works...maybe it can help you
Sorry Fred but in which $PATh
I'm trying to configure EAP/TLS and my freeradius version is 0.9.3, does this version
support this authentication method? if someone has used certificates can confirm me
that openssl is a good option to create them? thanks a lot
Bfr
-
List info/subscribe/unsubscribe? See
I'm using this HOWTO
http://www.impossiblereflex.com/8021x/eap-tls-HOWTO.htm
to configure eap/tls over freeradius. I'm trying to install openssl as it's explained
there but when I have to verify the sym link between some files I'm not very sure
about how to do this. Should the linked files be
Hi,
I had the same problem when configured eap. Instead of using your user
user3 Auth-Type := Local, User-Password == cisco
try with this one:
user3 Auth-Type := eap, User-Password == cisco
In my case that was the problem
bfr
- Mensaje original -
De: Nedialko Dimitrov [EMAIL
-Password == 123456
Service-Type = Login-User
German Rodriguez.
-Original Message-
From: BLANCA FERRERO RODRIGUEZ [EMAIL PROTECTED]
Sent: Friday, February 20, 2004 2:23 AM
To: [EMAIL PROTECTED]
Subject: Re: user password for LEAP
BLANCA FERRERO RODRIGUEZ [EMAIL PROTECTED
I'm sorry for my previous mail. Kostas Kalevras was right and LEAP operates correctly,
thank you very much.
Blanca
- Mensaje original -
De: Kostas Kalevras [EMAIL PROTECTED]
Fecha: Lunes, Febrero 23, 2004 11:16 am
Asunto: Re: problem with LEAP
On Mon, 23 Feb 2004, BLANCA FERRERO
BLANCA FERRERO RODRIGUEZ [EMAIL PROTECTED] wrote:
The communication between my AP and the server seems correct in the
first messages, but when the AP replies to the server challenge,
I can
see several error messages. The first ones is this:
' No user-password or NT-Password configured
Hi,
I'm trying to use LEAP authentication and my problem is the next one:
In the users file I have a user like this
prueba User-Password == 12345678
The communication between my AP and the server seems correct in the first messages,
but when the AP replies to the server challenge, I can see
20 matches
Mail list logo