Jefri bin Dahari a écrit :
Add command 'dot1x system-auth-control' for the switch.
Thank you, that was the solution !
But before adding this command, we need to delete all the dot1x
parameters on each port of the switch, if not the IOS, refuse to add
this command.
Thanks eveyone helps
Jefri bin Dahari a écrit :
I think you haven't put the NAS ip address in clients.conf.
Yes I did it :
client xxx.xxx.xxx.xxx {
secret = XXX
shortname= Switch
nastype = cisco
}
- Original Message -
*From:* Rafael DiazMaurin mailto
/AUTHOR: config command authorization not enable
dot1x-err:Unable to send a message to the Dot1x Authenticator process.
If someone has an idea...
- Original Message - From: Rafael DiazMaurin
[EMAIL PROTECTED]
To: FreeRadius users mailing list
freeradius-users@lists.freeradius.org
Sent
Hello,
Cna someone help me ?
I use : freeradius 1.0.4, and a switch CISCO 2950
I'm trying to configure EAP/MD5, but the client can't show the window of
login/password, it's connected to the network without asking for the
login/password, and the freeradius daemon is still :
Listening
the configurations on the client.
Zoltan A. Ori a crit:
On Monday 08 August 2005 03:54, Rafael DiazMaurin wrote:
Hello,
Cna someone help me ?
I use : freeradius 1.0.4, and a switch CISCO 2950
I'm trying to configure EAP/MD5, but the client can't show the window of
login/password, it's connected
5 matches
Mail list logo