Hi,
Any news for this problem?
Br,
Ville
5.8.2013 19:08, vi...@leinonen.org kirjoitti:
Here:
rad_recv: Access-Request packet from host 172.150.0.62 port 25196, id=194,
length=63
User-Name = testu...@.fi
User-Password = testpass
NAS-IP-Address = 172.150.0.62
#
Hi all,
I have setup fr (2.1.6) proxy against MS NPS it works fine
and even chalenge-responce works great. But now
i have one problem NPS sends attribute 25 (class) back to
the fr server and it's seems that fr brokes that/or dont
accepts that attribute class. When class should be eg.
Hi,
I have also changed shared secrets and it's not helping.
Br,
Ville
Ville Leinonen wrote:
I try to use FR to forwarding access-request to NPS servers, but some
reason FR/NPS gives User password is incorrect message. I have tripple
check that password is correct. When i test IAS to NPS
Hi,
I have also changed shared secrets and it's not helping.
Br,
Ville
Ville Leinonen wrote:
I try to use FR to forwarding access-request to NPS servers, but some
reason FR/NPS gives User password is incorrect message. I have tripple
check that password is correct. When i test IAS to NPS
Hi,
I just compile 2.1.6 from src and it's start to works.
Thanks for everyone that tryed to help me.
Br,
Ville
Hi,
Hi,
I try to use FR to forwarding access-request to NPS servers, but some
reason FR/NPS gives User password is incorrect message. I have tripple
check that password is
Hi,
I try to use FR to forwarding access-request to NPS servers, but some
reason FR/NPS gives User password is incorrect message. I have tripple
check that password is correct. When i test IAS to NPS proxy it works. I
have enable in NPS side MS-CHAP-v2, MS-CHAP, CHAP and PAP/SPAP methods.
Any
Hi,
I need to modify username before sending access-request/chalege-response
messages my sms-server. My need is modify usern...@domain.com to this
domain-username. Can some on help me how to do this? I can do that regex,
but i dont know how to configure proxy.conf to do this.
Br,
Ville
-
List
To: FreeRadius users mailing list
Subject: Re: Freeradius 2.1.5 and Solaris gmake install problem.
Ville Leinonen wrote:
Yes i go make gmake before 2gmake install and i went fine.
shrug It works for me on the Solaris Sparc / x86 boxes I have
access to.
Alan DeKok.
-
List info/subscribe
Hi,
I try to install FR to my Solaris 10 (SPARC) box.
Now i run gmake install and get this error:
Making install in rlm_acct_unique...
gmake[6]: Entering directory
`/home/ta/freeradius-server-2.1.4/src/modules/rlm_acct_unique'
if [ xrlm_acct_unique != x ]; then \
and Solaris gmake install problem.
Ville Leinonen wrote:
I try to install FR to my Solaris 10 (SPARC) box.
Now i run gmake install and get this error:
Did you follow the instructions to type make, before make install?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http
Hi,
I have a little problem in my radius configuration in my
redudant ldap section rad ver is 2.1.5.
redundant {
ldap-srv1
ldap-srv2
notfound = reject
}
Gives this error message:
/usr/local/etc/raddb/sites-enabled/default[167]: Entry with no value is invalid
users mailing list
Subject: Re: Problems in redudant ldap and authorization.
Ville Leinonen wrote:
I have a little problem in my radius configuration in my
redudant ldap section rad ver is 2.1.5.
redundant {
ldap-srv1
ldap-srv2
notfound = reject
}
That is not the correct
@lists.freeradius.org
puolesta: Alan DeKok
Lähetetty: pe 3.4.2009 16:10
Vastaanottaja: FreeRadius users mailing list
Aihe: Re: Chap auhtentication against LDAP
Ville Leinonen wrote:
Does Freeradius 2.1.5 support chap authentication against ldap?
No RADIUS server supports this. It's impossible
Vastaanottaja: FreeRadius users mailing list
Aihe: Re: VS: Chap auhtentication against LDAP
Ville Leinonen wrote:
So i cannot do this about using freeradius, but i can make it
using IAS (see link)?
No. You seemed to have misunderstood my response. Let me say it a
different way:
LDAP
Hi,
Does Freeradius 2.1.5 support chap authentication against ldap?
If i try it here is messages what i get:
Found Auth-Type = CHAP
+- entering group CHAP {...}
rlm_ldap: Attribute User-Password is required for authentication. Cannot use
CHAP-Password.
++[ldap] returns invalid
Failed to
also have printers, which uses 802.1x mac-auth.
Br,
Ville Leinonen
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
I read that, but what if user not found in ldap? Radius seems to need
some auth-type. How i can force auth-type using ldap?
My radius gives this message - No authenticate method (Auth-Type)
configuration found for the request: Rejecting the user
Here is some other logs if i use only ldap
Hi,
Never mind i figure out my problem. I add this line in my configuration:
ldap {
notfound = reject
}
So if user is not in my ldap. Then its rejected.
Br,
Ville
-Original Message-
From: freeradius-users-bounces+ville.leinonen=solodel@lists.freeradius.org
on behalf of Ville
Hi,
Maybe im not started this post clearly. So i try open again what i want to do.
I have a computer certificates.
I also have openldap and that ldap includes my computer accounts.
Now I want to use those certificates to authenticate
computers and get authorization information inside my ldap.
regards,
Ville Leinonen
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
this kindoff
enviroment.
Best regards,
Name: Ville Leinonen
E-mail: [EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
21 matches
Mail list logo