Drew Linsalata <[EMAIL PROTECTED]> wrote:
> Auth-Type = EAP?
>
> A few folks had mentioned to us that using the EAP auth type was a bad
> idea. Why? No idea. It seems obvious, so we'll give it a shot.
NO! Read the documentation in eap.conf for why it's a bad idea.
The solution to one br
Drew Linsalata wrote:
Alan DeKok wrote:
Why did you add Auth-Type = Accept to the server? It's breaking EAP.
Alan DeKok.
Auth-Type = EAP?
A few folks had mentioned to us that using the EAP auth type was a bad
idea. Why? No idea. It seems obvious, so we'll give it a shot.
No. You
Alan DeKok wrote:
Why did you add Auth-Type = Accept to the server? It's breaking EAP.
Alan DeKok.
Auth-Type = EAP?
A few folks had mentioned to us that using the EAP auth type was a bad
idea. Why? No idea. It seems obvious, so we'll give it a shot.
--
Drew Linsalata
The Gotham
Drew Linsalata <[EMAIL PROTECTED]> wrote:
> rad_recv: Access-Request packet from host ***.***.***.***:6001, id=22,
> length=154
> User-Name = "testtwo"
...
> EAP-Message = 0x0204000c017465737474776f
...
> Wed May 31 13:50:59 2006 : Debug: rad_check_password: Found Auth-Type
>
This is freeradius 1.1.1 with a Proxim/Orinoco AP700. We're configured
to use PEAP. We seem to be hung up on the EAP start from the AP.
Here's some log output. Note the "No EAP Start" part, which I think
tells us that the AP isn't relaying the EAP Start properly from the
supplicant.
Any fe
Service-Type = Login-User,
# Login-Service = Rlogin,
# Login-IP-Host = shellbox.ispdomain.com
# #
# # Last default: shell on the local terminal server.
# #
# DEFAULT
# Service-Type = Shell-User
# On no match, the user is denied access.
José Luis Solano
SGI - Soluciones Globales Internet S.A.
D
> rlm_eap: EAP/mschapv2
> rlm_eap: processing type mschapv2
> modcall: entering group Auth-Type for request 7
> rlm_mschap: No User-Password configured. Cannot create LM-Password.
> rlm_mschap: No User-Password configured. Cannot create NT-Password.
> rlm_mschap: No LM-Password or NT-Pa
Jose,
You've sent quite a bit of information to the list, but it's been pretty
much useless... The portion of the log that you are sending does not
include the *reason* that the authentication is failing. Please post
the entire portion of the log for this request (or put it on a website
somewher
Hi alll !!!
I use: freeradius-snapshot-20040216,
openssl.0.9.7c, pcmcia card cisco and D-Link access point, XP
client
I would like to run PEAP but freeradius show me the
following error. Please, look my authenticate and authorize
modules!!!
any idea??
thanks in ad
9 matches
Mail list logo