ilter-Id = "profile1"
-Original Message-
From: Hahusseau, Thomas [mailto:thomas.hahuss...@cassidian.com]
Sent: Monday, June 06, 2011 12:39 PM
To: David Peterson-WirelessConnections; FreeRadius users mailing list
Subject: RE: Freeradius + Alvarion 4Motion specify filter-id value
inac
18070a6e9a6a344ae5cafcf9fbba52de6098bb0e2aaf17fc63937c
(7) wimax : MIP-SPI = 67d71c9b
(7) wimax : WARNING: WiMAX-IP-Technology not found in reply.
(7) wimax : WARNING: Not calculating MN-HA keys
(7) [wimax] = updated
Sending Access-Accept of id 94 to 192.168.100.10 port 1812
MS-MPPE-Recv-Key =
0x136e9f
From: Hahusseau, Thomas [mailto:thomas.hahuss...@cassidian.com]
Sent: Wednesday, June 01, 2011 5:12 AM
To: David Peterson-WirelessConnections; FreeRadius users mailing list
Subject: RE: Freeradius + Alvarion 4Motion specify filter-id value in
access-accept from value in user conf file ?
Hello,
My W
terson
Envoyé : mardi 31 mai 2011 19:31
À : 'FreeRadius users mailing list'
Objet : RE: Freeradius + Alvarion 4Motion specify filter-id
valueinaccess-accept from value in user conf file ?
Make sure you configure FR to delete the MPPE keys. This can be found in
the /modules/wimax file. Se
+david.peterson=acc-corp.net@lists.freeradiu
s.org] On Behalf Of Hahusseau, Thomas
Sent: Tuesday, May 31, 2011 1:18 PM
To: freeradius-users@lists.freeradius.org
Subject: Freeradius + Alvarion 4Motion specify filter-id value
inaccess-accept from value in user conf file ?
Hello,
I'm running l
Hello,
I'm running latest version form Master Branch of Freeradius. I managed to
connect an Alvarion CPE to an Alvarion 4M BS with Freeradius server as
authenticator. Everything works well except that I directly specified in my
/site-enable/default configuration file the value of "Filter-Id" at
Yoni Levin wrote:
> I have been doing effort in the same direction right now.
>
> I failed to make 4 motion to work with freeradius.
This shouldn't be hard. The Alvarion engineers have access to the
complete FreeRADIUS source code, and can see every part of every
decision it makes. They *sho
On 2009-01-16 16:46, Alan DeKok wrote:
> Kristoffer Milligan wrote:
> > My battle to make FreeRADIUS work with the Alvarion 4Motion system
> > continues. I have been in contact with one of their engineers, and
the
> > only thing he saw that seemed invalid was a couple of missing
attributes
> >
Kristoffer Milligan wrote:
> My battle to make FreeRADIUS work with the Alvarion 4Motion system
> continues. I have been in contact with one of their engineers, and the
> only thing he saw that seemed invalid was a couple of missing attributes
> in the Access Accept response.
>
> Please look at th
>Regarding the problem, that's the second part that's confusing. The AAA
>says everything is OK. The ASN seemingly has what it needs, but the CPE
>doesn't connect to the network.
>
>I had an Alvarion engineer look at the FreeRADIUS log, and the only
>thing the could point out as mysterious, was th
That's a bit of my problem as well .. I'm not sure what goes where :)
Regarding the problem, that's the second part that's confusing. The AAA
says everything is OK. The ASN seemingly has what it needs, but the CPE
doesn't connect to the network.
I had an Alvarion engineer look at the FreeRADIUS
I see. And WiMAX attributes have been copied. I don't know much about
WiMAX bre you sure that these are not contained in MPPE outer reply
keys? They are different to ones in inner-tunnel. What problem is caused
by the lack of these attributes in the reply?
Ivan Kalik
Kalik Informatika ISP
Dana 1
It's set to yes I'm afraid:
ttls {
default_eap_type = md5
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
}
On Fri, 2009-01-16 at 12:02 +0100, t...@kalik.net wrote:
> Change use_tunneled_reply to yes in ttls section of eap.conf.
>
> Ivan Kalik
> Kalik Info
Change use_tunneled_reply to yes in ttls section of eap.conf.
Ivan Kalik
Kalik Informatika ISP
Dana 16/1/2009, "Kristoffer Milligan" piše:
>Hello again List
>
>My battle to make FreeRADIUS work with the Alvarion 4Motion system
>continues. I have been in contact with one of their engineers, and
Hello again List
My battle to make FreeRADIUS work with the Alvarion 4Motion system
continues. I have been in contact with one of their engineers, and the
only thing he saw that seemed invalid was a couple of missing attributes
in the Access Accept response.
Please look at the following url:
htt
15 matches
Mail list logo
