hi all,
I've searched the list for clues but havent' found a resolution for
the following:
1. On a testing network, with seven identically configured routers,
four connect and three dont. They are all the same make / model.
2. They're all using different usernames and passwords, and the NAS is
Andy Billington wrote:
auth-detail reports the Access-Request properly AFAIK.
reply-detail reports the Access-Accept properly.
In the radius.log I get
As opposed to debug mode, which is suggested in the README, FAQ,
INSTALL, etc.?
In the detail log I get
Accounting packets. NOT
thanks for your quick response!
debug didnt seem a likely source of info given that this is a server
that has been functionig without incident for six months and no
changes have been made to its config. I have been looking at network /
routing issues but couldnt figure out why some sites would
Andy Billington wrote:
debug didnt seem a likely source of info given that this is a server
that has been functionig without incident for six months and no
changes have been made to its config. I have been looking at network /
routing issues but couldnt figure out why some sites would work and
Thanks Alan - that last point was what I wanted to confirm before
going to the NAS owner to request they start looking. As you've said,
teh RADIUS server sends out packets and they hit the network - if
routing / network was the cause if this, none of the auth responses
would get through. I'm
The best way to verify this is to look at the debug (radiusd -X) for the
requests coming from the sites that have a problem.
Ivan Kalik
Kalik Informatika ISP
Dana 8/8/2007, Andy Billington [EMAIL PROTECTED] piše:
Thanks Alan - that last point was what I wanted to confirm before
going to the
hi Ivan,
Just been able to restart witout affecting working sites, have started
using -X and am seeing lots of info; for a start its binding to
correct IP (which counters the multi-home issue i was concerned
about). The sites that have probs are all reporting RADIUS ok, my
query / concern is that
Thankyou Alan!
I don't want to shout at the NAS owner (we rely on them for customer
connections on a private DSL network and the other sites are fine!)
without backup / confidence that I'm not making mistakes.
The users connect, both the logs earlier and now the debug output show
Accept messages
8 matches
Mail list logo
