Matthias Nagel wrote:
Anyway, first things - check your eap {} module config, specifically
ensure that max_sessions is high enough to support your load, that
timer_expire isn't too low, and if applicable, that your TLS session
caching is ok (size, particularly).
I did not find
Hello,
sometimes I get the error
WARNING: !! EAP session for state 0xABCDEFGHIJKLMNOP did not finish!
in my log files / debug output. Before anybody says have a look at
http://deployingradius.com/documents/configuration/eap-problems.html
that will help, please read on, because I already have
On 04/10/12 16:45, Matthias Nagel wrote:
I cannot find any pattern, so I do not believe it to be a client side
issue.
Of course, one can argue to ignore the warning as it works most of
the time, but I do not like indeterministically behaving IT systems,
hence it preys on my mind.
Has anybody
Matthias Nagel wrote:
I cannot find any pattern, so I do not believe it to be a client side issue.
It's always an issue with the client, WiFi, or AP. It's not an issue
with FreeRADIUS.
Why? All of the EAP is driven by the client.
Of course, one can argue to ignore the warning as it
Hello,
Am Donnerstag 04 Oktober 2012, 17:09:35 schrieb Phil Mayers:
On 04/10/12 16:45, Matthias Nagel wrote:
I cannot find any pattern, so I do not believe it to be a client side
issue.
Has anybody an idea what the reason might be? If anybody wants to see
a full debug output or a
On 04/10/12 18:10, Matthias Nagel wrote:
That would be nice, indeed. But if the reason is signal strengh of a
WiFi, then the numbers heavily depend on your WiFi coverage. So it is
difficult to compare.
Sure.
As Alan says, it's the client that's going away.
Maybe search the logs of your
Hi,
I cannot find any pattern, so I do not believe it to be a client side
issue.
snip
One thing: that logging only happens in debug mode. Most people
don't run in debug mode all the time, so as far as I know, it could
be normal - maybe everyone sees failure rates of that order?
snip
as
Hi,
I found the entry
# fragment_size = 1024
to be commented out. Does anybody has experiences with HP E-MSM 430 APs?
Probably, this is a dummy question: I always believed that the smallest MTU
that must be supported by an ethernet devices is 1500. Are there really APs
that support
On Thu, Oct 04, 2012 at 05:45:30PM +0200, Matthias Nagel wrote:
WARNING: !! EAP session for state 0xABCDEFGHIJKLMNOP did not finish!
...
Has anybody an idea what the reason might be?
We see it a lot less since we tweaked the EAP timers on our Cisco
Wireless Controller. You don't say what APs or
9 matches
Mail list logo
