mean ??- Original Message -From: King, Michael [EMAIL PROTECTED]To: FreeRadius users mailing list
freeradius-users@lists.freeradius.orgSent: Tuesday, December 06, 2005 5:45 AMSubject: RE: XP auth + PEAP Several clients
From: [EMAIL PROTECTED] [mailto:[EMAIL
The problem is that i connect to the netowrk but i
don't se the network. Ican't not ping any hosts.
- Original Message -
From:
xav guerin
To: FreeRadius users mailing
list
Sent: Tuesday, December 06, 2005 9:59
AM
Subject: Re: XP auth + PEAP
He means (please
, debik [EMAIL PROTECTED]:
The problem is that i connect to the netowrk but i don't se the network.
Ican't not ping any hosts.
- Original Message -
From: xav guerin
To: FreeRadius users mailing list
Sent: Tuesday, December 06, 2005 9:59 AM
Subject: Re: XP auth + PEAP
He means
i'm also have a problem to make PEAP works with XP
SP2.The PAP, EAP-tls, EAP-ttls work very well.i
realise that freeradius gives me this error :
rlm_mschap: No User-Password configured. Cannot
create LM-Password.
rlm_mschap: No User-Password configured. Cannot
create NT-Password.
rlm_mschap:
If you use users file with a User-Password, you don't have to use ntlm
in MSCHAP config because it's only here to deal with a Windows domain
Controller.
2005/12/6, mat yuh [EMAIL PROTECTED]:
rlm_mschap: FAILED: No NT/LM-Password. Cannot perform
authentication.
i do
configure
thanks xav for answering.. how to disable ntlm for
MSCHAP?is it in radiusd.conf?
--- xav guerin [EMAIL PROTECTED] wrote:
If you use users file with a User-Password, you
don't have to use ntlm
in MSCHAP config because it's only here to deal with
a Windows domain
Controller.
2005/12/6, mat
It's in radius in module configuration for mschap (just before ldap
module), but your config is correct from this point of view (it's
commented out).
Did you try EAP-Type := PEAP in the users file ?
2005/12/6, mat yuh [EMAIL PROTECTED]:
here is my radiusd.conf
--- xav guerin [EMAIL PROTECTED]
i put this in users file but still failed.. same
problem rlm_mschap: FAILED: No NT/LM-Password.
nurahEAP-Type == PEAP,User-Password==mypasswd
--- xav guerin [EMAIL PROTECTED] wrote:
It's in radius in module configuration for mschap
(just before ldap
module), but your config is correct
On Tuesday 06 December 2005 04:10, debik wrote:
The problem is that i connect to the netowrk but i don't se the network.
Ican't not ping any hosts.
And what have you done to troubleshoot your connection?
You must check your network. If the supplicant connects as you say, then
either the
When i try to connect i have something like this:
- Original Message -
From: Zoltan A. Ori [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, December 06, 2005 1:10 PM
Subject: Re: XP auth + PEAP
On Tuesday 06 December 2005 04
to the next request
-
So as you can se everything seems to be allright .
Am i right ???
- Original Message -
From: Zoltan A. Ori [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, December 06, 2005 1:10 PM
Subject: Re: XP auth
I think you should replace == by := .
this conf should work:
nurah User-Password==password
EAP-Type := PEAP
2005/12/6, mat yuh [EMAIL PROTECTED]:
i put this in users file but still failed.. same
problem rlm_mschap: FAILED: No NT/LM-Password.
nurahEAP-Type ==
So it's not a freeradius problem.
Check your network settings (NAS config,IP,netmask, dhcp servers,...)
2005/12/6, debik [EMAIL PROTECTED]:
Sending Access-Accept of id 56 to 192.168.0.20:1206
MS-MPPE-Recv-Key =
0xb77d91b85373992858a401f5c10221d07cb98ff5a27df64e28d42d1fd90b78ba
@lists.freeradius.org
Sent: Tuesday, December 06, 2005 2:18 PM
Subject: Re: XP auth + PEAP
So it's not a freeradius problem.
Check your network settings (NAS config,IP,netmask, dhcp servers,...)
2005/12/6, debik [EMAIL PROTECTED]:
Sending Access-Accept of id 56 to 192.168.0.20:1206
MS-MPPE-Recv-Key
mat yuh [EMAIL PROTECTED] wrote:
nurah User-Password == mypasswd
Use := instead of ==, and it will work.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
i'm put in the users file like :-
nurah User-Password := mypasswd
the problem still exist.. failed to connect
rlm_mschap: No User-Password configured. Cannot
create LM-Password.
rlm_mschap: No User-Password configured. Cannot
create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for nurah
: XP auth + PEAP
So it's not a freeradius problem.
Check your network settings (NAS
config,IP,netmask, dhcp servers,...)
2005/12/6, debik [EMAIL PROTECTED]:
Sending Access-Accept of id 56 to
192.168.0.20:1206
MS-MPPE-Recv-Key
Could you sent me your configs.
A would like to lokk how you use other authentication.
- Original Message -
From: mat yuh [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Tuesday, December 06, 2005 10:50 AM
Subject: Re: XP auth + PEAP (debik)
i'm also have a problem
these config file work for me with unix,tls,ttls and
pap only.. tell me if you found anything that can we share
__
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
-
List info/subscribe/unsubscribe?
Several clients
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
debik
Sent: Monday, December 05, 2005 6:30 PM
To: FreeRadius users mailing list
Subject: XP auth + PEAP
Have enybody
What do you mean ??
- Original Message -
From: King, Michael [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, December 06, 2005 5:45 AM
Subject: RE: XP auth + PEAP
Several clients
From
21 matches
Mail list logo